How to programming rf remote controller single led strips

How to programming rf remote controller single led strips
1. connect the rf led remote controller to 12-24 voltage (DC 12V).
2. turn the led strip on with remote.
3. then push the two buttons SPEED - and SPEED + at the same time in.
4. the leds going flashing and ur setting is done.
How to programm second rf controller.
5. disconnect the first rf controller from power supply 12V.
6. connect the second rf controller to 12-24V and follow the step by step 2 to 4
7. by using three rf controllers then disconnect the first and second rf controller before programm the third rf controller.
Now you can install more rf controllers without all leds going fired up in the same time. You not have to line of sight to the controller. You can build in hardware hide the controller it reacts by a stone wall and also of several meters away it have a very strong signal!
Perfect for home decoration rf remote control hidding in hardware diy led light project inspired.
Living Easy David O'Brien
होम आंतरिक एलईडी लाइट्स
पावर एलईडी पट्टी कनेक्ट करने के लिए कैसे
#Mindmadedesigns

[@ledmk2]

Subscribe! Video Time List Home Projects ua-cam.com/video/IBJF6IMkv6A/v-deo.html

[@danimarie640]

Wanted to return a led sign I recently purchased until I found this. Super easy fix. So thankful for this vid!

[@ledmk2]

Thank you for watching

[@karnandohuang4800]

This tip helped me. I thought my receiver stopped working after it suddenly flashed itself. Then i watched this video and pressed SPEED+ and SPEED- simultaneously, now it works!!! Thanks man, i thought i needed to buy a new receiver. You saved my life and wallet.

[@ledmk2]

Glad it helped, Thank you for watching

[@WhatDavidDoes]

Awesome: this fixed my problem. I can't believe the manufacturer didn't put this in their instructions.

[@ledmk2]

Thank you for watching | Subscribe

[@romanpajak4479]

My controller stopped working. You solved my problem. Thank you so much.

[@ledmk2]

Thank you for watching

[@st4fi]

Finally found a way to fix the issue with pairing the remotes - thanks!

[@ledmk2]

Thank you for watching

[@gender061]

Thank you, this prevented me from buying a new set of controller/remote

[@ledmk2]

Thank you for watching

[@michal1327]

Thank you so much! I thought that it is broken, very useful video!

[@ledmk2]

You're welcome!

[@Tabifsd]

Thanks man you really solve my issue.

[@ledmk2]

Thank you for watching and that it can help

[@TheGONROD]

Excelent, thank you!

[@ledmk2]

Thank you for watching

[@Extras16]

Thank you!

[@ledmk2]

You're welcome!

[@meganmiller5981]

works thank you!

[@ledmk2]

Thank you for watching

[@victor_belo]

Nice video, can I connect/sync one remote (24keys) control to multiple RGB controller?

[@ledmk2]

I dont know

[@25566]

if your remote has battery but doesn't work, just turn on the led strip from the power and then push the two buttons SPEED - and SPEED + at the same time in until it starts flashing like crazy, then that means its working. Mine got disconnected often because some neighbour has a RF garage door

[@ledmk2]

Thank you for watching

[@Ataxsan]

Thanks

[@ledmk2]

Thank you for watching

[@aleksandarsrdanov1171]

Does this controller use Pulse width modulation (PWM) type dimming?

[@ledmk2]

I dont know

[@UC04Sv45_GRW-kxiwrVXWG1w]

Yes.

[@williambachmann8842]

Something in my garage is turning the led lights under my car on. Happens day or night. Only when car is in garage. How do I fix this. It's running the battery dead.

[@ledmk2]

I dont know

[@torranceclark1988]

The red light on my controller won’t cut off. What do I do

[@ledmk2]

Buy a new one

[@ericflask727]

Could you kindly advise from where can I buy the controller power supply and remote control please? Thanks

[@ledmk2]

aliexpress

[@maxmeyer7299]

Hi, i have a second controller that not work, new batterie insight, but no function. Have you some information, how can i reactivation the RF-control? Light work, only the last configuration, power on/off has no change?

[@ledmk2]

I dont know

[@nicolasboccanfuso6366]

This tip helped me resolve a problem with my LEDs not responding anymore to the control after flashing :
i pushed "speed -" + "speed +", it flashed, then all came back to normal

[@ledmk2]

Strange, i dont know why it go back to normal

[@praisekek8263]

I had the same problem, i thought the receiver got damaged. This solution fixed it.

[@rkelly011]

Fantastic thank you, my remote had stopped working but this fixed it. They should really include this in the manual.

[@ledmk2]

Thank you for watching | Subscribe

[@UlasAktok]

You are awesome thank you for this. Subscribed immediately.

[@ledmk2]

Thank you for watching

[@Usmcto]

Thank you this just saved me from taking the lights down I couldn’t get them off

[@ledmk2]

Thank you for watching | Subscribe

[@BijilBaji]

Thanks for the video I was looking for this

[@ledmk2]

Thank you for watching | Subscribe

[@ianzarczynski]

Thanks for this, saved me from having to deal with a return. ++

[@ledmk2]

Thank you for watching | Subscribe

[@0kk4p]

Thanks man you save me!

[@ledmk2]

Thank you for watching | Subscribe

[@zaido8735]

Thanks a lot dude you save me

[@ledmk2]

Thank you for watching | Subscribe

[@edouardgaouette6958]

YOU ARE THE BEST

[@ledmk2]

Thanks

[@breweroni535]

I configured mine to control a g6.35 bulb socket with 12v dimmable led bulb and it doesn't work. Is there something I am missing?

[@ledmk2]

This came with a remote control and controller for between the wire.
did you have the same as me? If you press the remote controll then the light in front remote go on?
If not then the remote not works. battery empty or maybe when you press on the place where the battery is inside that it will do. then the contact from the battery is not good.

[@CRChannelurl]

On mine, the power button only dims the led strip slightly, I cannot turn off the lights. Any advice?

[@ledmk2]

I dont know. Thank you for watching | Subscribe

[@CRChannelurl]

@@ledmk2 I had the 12v controller wired in backwards.

[@ledmk2]

How to programming rf remote controller single led strips
ua-cam.com/video/e2yV2cWbDsA/v-deo.html

[@darknessblades]

thank you was looking how to do this, since the chinese/English manual has no info about it.

[@ledmk2]

Thank you for watching | Subscribe