Custom Cerakote Scotty Cameron Newport Putter

In concurrence with the Masters Tournament, we customized a 1998 Newport Scotty Cameron Putter with a Masters Theme. A giveaway was held throughout the tournament, with a winner announced the following week. Follow us on Instagram and Facebook and stay tuned for upcoming giveaways.
Feeling inspired? Find an applicator near you.
www.cerakote.c...
Find more restoration projects here: www.cerakote.c...
Cerakote coatings used:
H-164 GRAPHITE BLACK: Putter Head and Shaft
www.cerakote.c...
H-109 GLOSS BLACK: Color Fill
www.cerakote.c...
H-166 ELECTRIC YELLOW: Color Fill
www.cerakote.c...
H167 USMC RED: Color Fill
www.cerakote.c...
H-200 HIGHLAND GREEN: Color Fill
www.cerakote.c...
You can purchase the IWATA LPH80 at Cerakote.com
www.cerakote.c...
Shop all Cerakote Supplies and Equipment here
www.cerakote.c...

[@deusgolfco]

Thanks, i'd like to try some out on my next project!

[@Cerakote]

Nice, good luck with your project

[@thenotorious9032]

Is that a sand blasting machine? That really looked phenomenal afterwards!

[@Cerakote]

Yes we sandblast it around 2:20 in the video

[@boskosdoghouse]

Does it take 3 strokes off your round?.....

[@jbplays7302]

actually it takes four off! haahaaa!!! If you practice with that putter more than you would have with another putter, it may take more than 3 strokes off!

[@timroberts6765]

Where did you get the paint fill tool. I gotta get one!

[@Cerakote]

We've got them here on our website (Color Fill Pen SE-504): www.cerakote.com/shop/cerakote-equipment/SE-504/cerakote-color-fill-pen

[@bigdealoreilly]

what is the clear fluid added to the cerakote black?

[@mintberri]

Probably hardener

[@scottmyers8911]

Great process overview!

[@austinstevens2065]

What do you have the psi to your compressor set at? Also, where do you have the airflow set to?
Love your products. use them all the time. Trying to dial it. In even further. My issue is it seems I’ve been getting a lot of dry spray. I’m trying to figure out how to get that to Stop. Assuming I don’t have air inlet opened up enough. Also, what blast media grit are you using?

[@austinstevens2065]

I use the black widow airbrush.

[@Cerakote]

The problem with the airbrush is that you just can't get enough volume to thoroughly wet out the coating.

[@austinstevens2065]

@@Cerakote do you recommend opening up the airflow as far as a I can? I will say the black widow airbrush pushes out substantially more paint that other airbrushes so I may be able to get away with it.
I think my issue was I had the air flow tightened to far down so it couldn’t wet out the putter.
What do you keep your compressor air pressure at? Elite series indicates between 30-25 psi. Is that where you keep yours?

[@tomworboys4038]

What are those plugs you’re putting in the neck to hang?

[@Cerakote]

We use a variety of silicone plugs to protect threaded or tight spaces where we don't want coating. They can be found on our website. www.cerakote.com/shop/cerakote-coating/SE-3100/silicon-plugs

[@austinstevens2065]

What size plugs were the ones you use ?

[@Test-dt7md]

4:03 would you let me know the tool name that fills lettering on the putter?

[@Cerakote]

That is the Cerakote Color Fill Pen SE-504, and can be found on our site under shop tab.

[@Cerakote]

It's called a color fill pen. Here's a link to it on our site: www.cerakote.com/shop/cerakote-equipment/SE-504/cerakote-color-fill-pen

[@randymayii1402]

What is that paint fill pen called?

[@Fze5656]

I’ve seen people use it for writing/ calligraphy

[@faujuanchoong4258]

What series are those?

[@Cerakote]

All were H Series coatings

[@박기성-x8z]

What is this your pen?

[@samdonald198]

Good vid! Hopefully you had permission to add the Master's logo.. that's a tightly held logo.

[@martinijede]

Can I use classic convection oven?

[@Cerakote]

Yes, you could then main thing is ensuring that you have nice even heat, especially with thicker parts.

[@dannybrant6758]

did you not flash cure the head before painting?

[@harriknowles7398]

Hi, what media do you use in the sandblasting cabinet? Thanks

[@JDD207]

Hi can you do mine 😂

[@FlagstickPutters]

seems like alotta wasted cerakote for the paintfill....

[@nickthurston5282]

Why do you feel the need to next level this….what about a normal person just looking to re finish a putter.
Won’t be purchasing a Cerakote product. I would have yesterday and now wouldn’t recommend to an enemy

[@MrNoipe]

haha, what? because they did a good job so you're embarrassed

[@JackGitre]

Hey Nick, sometimes it’s better to think before you speak (or comment). Hope this helps!

[@acheeseburger7367]

What? Refinishing is putting on a new finish. Cerakote is a new finish. I’m not sure what you are complaining about, people have different preferences for how something should look, and this looks good for the people who like it like that.