Valeton GP200 Output Options - The Valeton has some cool tricks up its sleeve

Поділитися
Вставка
  • Опубліковано 27 кві 2022
  • Valeton GP200 Output Options - The Valeton has some cool tricks up its sleeve
    Get the Valeton GP-200 HERE
    amzn.to/45ebRA9
    ‪@Valeton‬ #valeton
    BUY KRACHWERKE PEDALS HERE:
    krachwerke.company.site/produ...
    krachwerke.company.site/produ...
    Support our Indigogo Campaign here:
    igg.me/at/krachwerke/x/100108...
    BUY THE PEDALS HERE:
    krachwerke.company.site/
    PLEASE SUPPORT US:
    LIKE, SUBSCRIBE AND SHARE
    Is the most valuable thing you can do for a growing UA-cam channel...
    / krachwerke
    Buy my music, pedals and other cool stuff here :-)
    www.krachwerke.com/online-shop...
    krachwerke.company.site/
    Please also consider:
    Please support us by buying us a coffee:
    www.buymeacoffee.com/krach.werke
    You can purchase our Amplitube Presets here:
    www.buymeacoffee.com/krach.we...
    Our cab impulses:
    krachwerke.company.site/produ...
    Check out or buy our music:
    krachwerke.company.site/
    www.krachwerke.com/online-shop...
    krachwerke.bandcamp.com/
    open.spotify.com/artist/0dkoa...
    Links to streaming services and purchasing of the songs
    Publish your music on all Streaming Services:
    distrokid.com/vip/seven/1627759

КОМЕНТАРІ • 59

  • @georgewilkins4231
    @georgewilkins4231 Рік тому +9

    I bought a power amp with volume bass mid and treble controls. So much better than plugging into an fx return on an amp.. Harley Benton 100 power amp (into a 2x12 Celestion 80/70 cab) Affordable price and sounds great...

  • @RAX1Music
    @RAX1Music Рік тому +8

    Great video - just for info, unless someone has already identified this, but you can turn off the AMP and CAB options in the GP-200 so that you can plug it straight into the amp itself rather than into the amp's return. It's in the manual, page 19. Hope this helps!

    • @jcb.98
      @jcb.98 6 місяців тому

      Exactly the comment i was looking for mate. Thanks alot

    • @ClNoBody
      @ClNoBody 6 місяців тому

      Yes, but he wants that ability separate for the left and right outs.

    • @AngusNB
      @AngusNB 2 місяці тому

      The problem is this turns off Amp simulation for all outputs. You may want to use an Amp sim for recording or front of house.

  • @frankconti6591
    @frankconti6591 Рік тому

    Btw: I find this channel simply-brilliant & beautiful

  • @uptownphotography
    @uptownphotography Рік тому

    I watched your video again, as now I have ordered one of these units and even better the second time around. There's quite a bit fuller sound when we hear the two signals (amp and direct signal) together.
    I have heard videos with just the direct signal (left and right) recorded direct and this unit for the money sounds really good.
    I do think also you bring up very valid points how Valeton could improve this unit with a few firmware tweaks. Hope they're listening to your advice...I agree.
    Phil
    NYC Area

  • @gsroy-iw7ed
    @gsroy-iw7ed Рік тому

    Very good
    Super tones

  • @AleksandrsKarimovs
    @AleksandrsKarimovs 2 роки тому +2

    Thank you. That's the subject I am specifically interested in and I will think twice before bying Valeton. As a musician, I often play live, so having this option of using a separate amp output while xlr's go to front of desk is critical for me. Usially not every amp available on stage has an fx return.

    • @therealtech833
      @therealtech833 Рік тому +2

      Good point, but you have to remember the price point of this thing, it's punching way above its weight. My buddy just picked one up as a backup unit to his HeadRush, some ways he loses almost nothing, just a few glitches that if software fixes, will make it virtually the same, in terms of usability. The HeadRush costs double.

  • @gus3333
    @gus3333 Рік тому +1

    The latest version of my GP-100 (v1.3.2) in settings, there is the option to tuurn on/off the cab for L or for R. I guess this is what you mentioned. So, I guess it is possible to use the cab from the venue and the full patch form the PA.

  • @dajojojo
    @dajojojo 6 місяців тому

    Great video thanks.
    Is it possible to place the fx loop send in the chain before the amp/cab emulation as a signal feed to a combo input, and loop straight back into the return (e.g. with a Y splitter cable), then use the main out (post amp/cab emulation) to send to the desk for FOH? Not sure I worded that well!

  • @frankconti6591
    @frankconti6591 Рік тому

    ‘Especially glad i found you !!!😃🌾🚧🎭🎈👁️

  • @peppaz
    @peppaz 7 місяців тому

    Great Vid - do you know if the pedal can used for the octave/pitch shifter effect? (bulls on parade style)

  • @degstenk
    @degstenk 9 місяців тому

    Hi! Any tips for how I can turn off direct monitoring? I am stuck with two signals, one from the GP itself and one from FL Studio. Connected to computer via USB and headphones connected to "headphone out" on the GP. Thanks for a great video!

  • @fractionjackson
    @fractionjackson Рік тому

    I watched your video as I was trying to work out how to get a good level into a combo amp. I realised that I was always going to have the 'double' amplified problem as my combi amp would always be adding so much on top of what is coming from the valeton. Of course you can turn off the amp and cab modelling, but I wanted to hear it. Having tried both balanced and unbalanced it was still way way too loud. My amp does not have separate input for return and send. Just the standard input. So... I started looking at the send and return paramaters I settings, and realised that you can move the send from it's default position near the start of the signal chain, to the end. Meaning that instead of the send being a dry signal, it can be a wet signal with it's own output level. (send level) so using the send output of valeton set to level 3/100 I can send the fully wet signal to my combi amp input at a useable level. Presumably I've made some unforgiveable errors in dojng this, but sounds OK! 😂

    • @Rushan2112
      @Rushan2112 5 місяців тому +1

      Dude, I was coming here to post this same setup (I think?). I always played pedals through an amp - which doesn’t have an FX loop. Using the GP200 I wanted to go XLR out to front of house but ALSO play through my amp. Problem is, amp/cab models suck in front of the amp. So I moved amp and cab blocks to the end, and fx loop block right before. So my fx send is sending all the pedal chain without the amp/cab sim, and the main out is including the amp/cab sim to the sound guy. Anyone else doing this? Have yet to test it live, but at home the sounds from the amp and the XLR main out (tested via a usb interface and in-ears) sound good.

  • @Spartan_82
    @Spartan_82 6 місяців тому

    Is this method (output right or L(mono) direct into fx return of the amp better than 4cable connection?

  • @sarojmusic
    @sarojmusic Рік тому +1

    My valetone default tone data lose when I plugged power cable display is blinking now I have only it's gp 200 in display how to recover ? I am doing reset but not recover how to recover please any idea 🙏

  • @supay6537
    @supay6537 14 днів тому

    Can you use Valeton GP200 with Marshal Code 50?

  • @jom3934
    @jom3934 Рік тому

    Thanks for sharing these infos. Does Valeton sound thin when not using IR and connect to any solid state amp or tube amp?

    • @KrachWerke
      @KrachWerke  Рік тому

      I use it all the time with amp emulation on and into fx return of the amp. No problems.

    • @jom3934
      @jom3934 Рік тому +1

      @@KrachWerke thanks for the response! Cheers!

  • @jaychen2000metal
    @jaychen2000metal 2 місяці тому

    Ok so dont go from mono out into the front of my amp and i'm also running effect send and return from amp to Gp-200 with crunch channel. This is why i have a zappy tone with feedback issues ?

  • @marceliguitarelli931
    @marceliguitarelli931 4 місяці тому +1

    Sooo actualy you can use every output with or without amp cab so. You can plug Valeton into cab/amp fx loop return without cab sim and second output into mixer with cab sim. You hace those options in global setting and even more after pluging into computer so this device is perfect 😅😅😅

  • @pogg616
    @pogg616 Рік тому

    I do have a question regarding the balanced xlr output: can it be plugged into the line inputs of a audio interface using a XLR to TRS cable? It doesn't specify in the manual what type of signal is outputting.

    • @KrachWerke
      @KrachWerke  Рік тому

      As far as I know trs is just a balanced type of quarter inch jack so I would say yes IF your interface accepts trs. I can't confirm that because my interface I know only accepts xlr and not trs

  • @siena9594
    @siena9594 2 місяці тому +1

    Is it possible to set the 'no cab mode' independently for each output..?
    The global setting seems to apply whichever option you choose to all outputs from what I can see.
    I'd like to run the balanced XLR's (both L &R) into my mixer/studio monitors with the cab sim 'on', then I'd like to take the Unbalanced 'L' channel only into a clean power amp (Harley Benton GPA-100) with the cab sim set to'off' as this will be running into 2 x12 Celestion loaded speaker cab...
    so in a nutshell I want cab sim 'on' for the XLR and cab sim 'off' for the unbalanced... but I can't seem to find this function in the desktop software..?

    • @siena9594
      @siena9594 2 місяці тому +1

      @@andymaidment111 exactly Andy, I’m sure it could be done via simple firmware update. My Kemper stage lets me configure all the outputs independently…. admittedly there’s a huge difference in price point, but it would be great if they sorted this

  • @jenniferthomson849
    @jenniferthomson849 Рік тому

    I buy one of these thinking it would be better than my boss gt1 .how ever the distortion and delays reverb and over all sounds is better on the boss gt1 a lower class unit. And runn on battery and smaller to get around. So looks like I'm selling the laleton

  • @yahyawinata287
    @yahyawinata287 Рік тому

    how to make an in ear set up just using this effect? anyone knows?

    • @KrachWerke
      @KrachWerke  Рік тому

      Hmm, the Valeton has a headphone out, that could possibly be sent to a in ear mix I suppose.

  • @hardisweetspot2973
    @hardisweetspot2973 Рік тому

    Does the TS output is DRY signal? and the XLR output is the WET signal? im a bass player

    • @KrachWerke
      @KrachWerke  Рік тому

      Hi! No, you can only switch off cab emulation on either left or right channel but no control over TS or XLR

  • @jaycee4385
    @jaycee4385 Рік тому

    for some reason when i plug in to my amps power amp in it sounds so swallowed and muddy , is there any way past this?

    • @KrachWerke
      @KrachWerke  Рік тому

      If the power amp runs to a guitar cab please check that you have cab emulation switched off on that channel on the Valeton. If it goes to a full frequency speaker then you need the cab emulation on. That is the only thing I can think off for now.

  • @1972Georges
    @1972Georges Рік тому

    Do I connect my FRFR speakers to the balanced or unbalaced output? In the manual, they say both is possbile. I thought balanced out is to connect to the PA / Front of house and the unbalanced output is used with the FRFR Power Speakers....pls. help. thanks.

    • @sonofdirt
      @sonofdirt Рік тому +3

      It doesn't really matter. XLR/balanced is just better for long cable runs, it reduces noise. Unbalanced is fine to anything just prefer balanced when you can. They both carry the same audio signal so don't worry about doing anything wrong. (Just don't send phantom power to the XLR lol)

    • @1972Georges
      @1972Georges Рік тому +1

      @@sonofdirt thanks very much

    • @Romanlegion1990
      @Romanlegion1990 9 місяців тому +1

      Which frfr are you using?

    • @1972Georges
      @1972Georges 9 місяців тому

      @@Romanlegion1990 Valeton GP-200

    • @Romanlegion1990
      @Romanlegion1990 9 місяців тому

      @@1972Georges what are you using for your frfr speaker?

  • @tolsen8212
    @tolsen8212 Рік тому

    How do you find the latency when used as an audio interface?

    • @KrachWerke
      @KrachWerke  Рік тому

      I haven't used it as an interface so I am sorry but I don't know how it performs in that way

    • @tolsen8212
      @tolsen8212 Рік тому

      @@KrachWerke Cheers

  • @bisheshchettri2002
    @bisheshchettri2002 Рік тому

    Does this have tap delay feature??

  • @BLU3Fi5H
    @BLU3Fi5H Рік тому

    Am I the only one having an issue with my reverb mix maxing out after saving a preset?
    I can save it with the reverb mix down around 30%, and after saving it seems fine, until I switch to another preset and come back to it. It always comes back with the reverb mix maxed out, regardless of what I do.
    Don't suppose anyone knows any fixes for this?

    • @KrachWerke
      @KrachWerke  Рік тому

      Actually I did have a problem like that but it just went away. I wonder if it went away after the firmware update. I am sorry but I can't remember.

    • @BLU3Fi5H
      @BLU3Fi5H Рік тому +3

      @@KrachWerke in case anyone else has this issue with theirs. There are 2 common issues people seem to have with these pedals actually.
      1. Mix, gain, volume, etc maxing out is often caused by setting a parameter for expression pedal 2, but not having it plugged in. It remembers the maximum setting for the expression pedal and restores it to that level when you switch back to that patch.
      2. No sound on a downloaded patch. In most cases this is caused by leaving the effects loop setting on series. Switching to parallel should fix this issue.
      I was ready to give up on my pedal after I kept running into issues like these, but they are pretty easy to fix, simply by disabling the second expression pedal within the patch or switching to parallel on the effects loop.
      Maybe I'll make a quick video allowing how to fix these issues, in case anyone out there might not be familiar with the settings.

    • @KrachWerke
      @KrachWerke  Рік тому

      @@BLU3Fi5H Both points super helpful, I am sure it happens to many folk. I overlooked point 1 until recently. Thanks for sharing!

  • @uptownphotography
    @uptownphotography Рік тому

    Nice video.
    I was considering this unit for direct recording to a DAW...
    Phil
    NYC Area

    • @whiskeywhiskeyromeo3730
      @whiskeywhiskeyromeo3730 Рік тому +1

      I am dumb....are you saying I could plug straight into computer without one of those Scarlett focus rite type devices ? Thanks

    • @uptownphotography
      @uptownphotography Рік тому +1

      @@whiskeywhiskeyromeo3730 When I bought it from a Valeton dealer on ebay, that is what he told me. He said the DAW will recognize it as a device just like an interface. I actually never tries it yet, but I should give it a try myself. Hope that helps.
      Phil
      Jersey Shore Area

    • @whiskeywhiskeyromeo3730
      @whiskeywhiskeyromeo3730 Рік тому +1

      @@uptownphotography thank you Sir, I bought this unit short time ago and am brand new at trying computer DAW stuff....57 here... thanks for your kindness!!! Peace

    • @uptownphotography
      @uptownphotography Рік тому +1

      @@whiskeywhiskeyromeo3730 My pleasure....Be well and happy recording.

  • @workdays8280
    @workdays8280 Рік тому

    Is there any one on UA-cam he no how to use this unit. Every one is just playing it and just talking.

    • @swedeinla
      @swedeinla Рік тому +2

      its so easy its basically self explanatory....That and you have a manual

  • @BettoniFerreira
    @BettoniFerreira 6 місяців тому +7

    Man, sorry, you take too long to get to the point, it's tiring