I have a Gigabyte 3060ti (it seems like it is the same model) OC with msi afterburner core voltage +50 power limit 104 temp limit 90 core clock to +150 memory clock +1000 fan auto It hits from 1770-2100mhz and play stable at 2070 or 2085 Anything should I worry about these settings? I'm new to OC world.
Hello there,,, I have the same card, with 5600x cpu, what I noticed about the card is that when temp of gpu falls down to 36, all fans stop working. When it goes up then two of them are working. I haven’t noticed if I go up to 70 degrees if third fan will work… is that normal?
A good 650W with a decent power efficiency rating is my recommendation:) A reputable brand is a must, unless you want to cheap it and risk taking out other components or not being able to power your system stably.
You can't just bump the frequency and claim you have a Gaming OC PRO. the Gaming OC Pro has a different power delivery and and a higher maximum power limit than the Gaming OC. The OC Pro runs stable beyond 2100 core clock
He was saying essentially he had achieved the same stock OC that version would push. Practically he wasn’t wrong either. He wasn’t saying his cards hardware changed to that of the other card. He was saying the extra core clock that the card ships was exactly what he had on his card too. You’re trying to tell him something he’s well aware of 😂
Did you ever try undervolting it ? These 1x8pin cards can sometimes perform better with slight undervolt like 950mv you can actually get a better overclock this way cause of the low power limit. Anyone got more info about this ? I found this model at a good price so wondering if I should add more money to get a model with 2x8pin power.
msi if you have no limited case space. i my self considering the gigabyte for its compact model, slimmer and thinner, sould be fit for majority pc build
@TheFullSetup So finally do you recommend this card? As far as i know it's a very good 3060ti and i found it in a reasonable price in my country. Would you recommend it?
It’s located on the side that faces outwards towards you, looking in, and on the right end. More so towards the centre on this card however. Question though? He shows the card in this video and talks about the 8 pin and it’s location, so what did you miss exactly?
I have the ASUS RTX 3060Ti Dual OC Currently copied the fan curve from asus’ software over to msi afterburner and have the card running at: +170MHz core clock speed +1180MHz memory clock Maxed out power limits and allocated max mV’s to get it from +150 to +170. Should I drop it to +150MHz to achieve my OC without touching mV’s? Or as I’ve heard, MSI afterburner cannot damage your card as it’s only touching what the card allows, and therefore I don’t need to worry about anything as long as it’s stable and not artefacting? Any input my fellow overclockers :)
I'm sure you won't have to wait to longm honestly I didn't think I was going to be able to get one till next year so was just going to play the open world games on geforce now for a couple a months.
I have the same card and I feel it is loud as hell. The fans wont start up either if they don't get 50% or more. When they are spinning I can turn them down to about 30%. I am running them idle on 45%, pretty silent, but 65% or more the sound gets really high.
That's odd mines good I'd say 65-75% I can hear them in my system but certainly not loud as hell more quiet but not silent. As soon as they go over 80% that's where these suffer from having smaller 80mm fans as the coil wine starts to kick in on my card.
question , i orderded a new 3060ti from best buy ,picked it up, paid 599 plus tax and when i went to open it had no plastic on box, then when i opened it it had been opened and only a yellow sticker holdng the bag shut. i repaced a rtx 1660 super and dont really notice much of a difference. the 3060 fans do not start with pc andit gets really hot on the outside of it ,ith the fans never starting on ultra settings? called best buy and they said i could return but i cant find anouther. just a little nervous on card being open box
The fans don’t start on startup bc most stock fan curves don’t run fans at idle temps. And the gpu getting hot on the outside is fairly normal if you’re using 80-100% power.
Is this configuration good for a pc gamer? I’m new in this pc gaming world. Thanks Asus ROG Strix x570-F Gaming ATX Motherboard PROCESSOR AMD Ryzen 5 5600x (6 Cores, 12 Threads), 35Mb Cache, TurboBoost up to 4.6GHz RAM Corsair Vengeance DDR4 32Gb White (8gb x 4) 3000MHz GRAPHICS CARD Gigabyte GeForce RTX3060 Ti OC 8Gb CPU COOLER ID Cooling 240mm AIO Liquid Cooler HDD Not included SSD WD SN550 1Tb Rocket NVMe PCIe M.2 2280 WI-FI WiFi 6.0 pre-installed BLUETOOTH BT 5.0 pre-installed POWER SUPPLY UNIT Adata XPG Core Reactor 650watt 80+ Gold Fully Modular Silent Power Supply Unit CASE Corsair 4000D White ATX case CASE FANS 120mm ARGB Silent PC Case Cooling Fans with Aura Sync OPERATING SYSTEM Windows 10 Pro.
Most of it looks really good...The only big thing i see holding the system back a bit is the RAM. Its only 3000mhz , personally I would have at least 3200mhz or even better 3600mhz. The other thing inoticed is the SSD thats wierd what you put. A "Rocket" is Sabrent brand (i personally have a Sabrent rocket and its awesome) If your using a WD then it might be a bit slow...WD M.2 drives seem to lag behind other drives sometimes
I have the same gpu, and the power consumption is always wrong in programs like gpu-z or HwInfo. Always shows 6,5W at full load. If i change de power limit in msi afterburner nothing happend. In the wall is always showing 210W.
Same Issue here, mine doesnt clock as high and never really goes above 100% power limit but still says its limited. some Zotac cards had the same issue but they got a bios update to fix it.
It's really quiet I imagine those two would be better as they have bigger fans. Like I said in this video it's certainly a small 3 fan GPU but I have been gaming on it most the weekend and I can bairly notice it. If you push the fans to max there is some coil wine but 75% and under its virtually silent
@@thefullsetup from gtx 1070 G1 gaming, 1080 G1 Gaming, and now 3060 Ti gaming, they have similar fans, and still...similar coil wine problem. but its ok, my 1070 still works perfectly
Hello mate recently purchased this card I'm aware this video is fairly old but I attempted to use a 6 and 2 pin connector only for the display not to work after that I replugged them now with the display working and the GPU not registering, the fans would turn on for a split second once the PC was turned on then they'd switch off any solutions for this?
i can only add maximum 800mhz to memory clock and i did +220 on core clock, if i go higher with memory clock it crashes :c i have a gainward rtx 3060 ti ghost, idk what settings to use to lower temps and improve performance
I have gpu usage problems and big fps drop on 3060ti eagle oc and ryzen 7 3700x do you know why... Ive try everything with no luck thinking to return gpu to store
I've got the 3600 and it's not maxing it out in some games at 1080p my battlefield has some dips down to 80% usage. Which is sort of to be expected on a Ryzen 3000 with a 2080super level card at 1080p your going to have bottlenecks in some games. What's your ram config like on your setup?
@@toniskaro2761 what's the speed of the ram? Is is a single stick as that's bangs performance. Also I would look into Ryzen dram calculator and set all your ram timings manually can end up with a nice performance boost. Just be prepared for a few crashes and blue screen while you get the ram timings dialed in perfect.
Hello, I was able to get this card recently and Im pretty new to overclocking. If you dont mind, could you answers some questions for me? I have a i5-10600kf and a seasonic 650W 80+ gold, is the psu good enough to overclock it? Will it be okay to overclock it the same way as you and have it not make anything die or have reduced lifespan?
Should be! They recommend a 600w PSU so you’re within spec. Overclocking is usually safe just don’t overdo it. It sometimes does reduce the lifespan of your components depending on how much you push it.
For that setup 650w is more than enough, just don't touch the voltages when overclocking your gpu because that is the only thing that could damage it if you don't know what you are doing. Also remember not to add the overclock profile to start on default before you know it is stable!
No they will pair fine but I wouldn't be expecting to play a any recent triple A titles on them. It will be fine for e sports games but not a lot else.
so i need a little bit of help,i have the same gpu and i m playing msfs2020 at any settings low,high at the same 20-30 fps and idk why and in overwatch i have 85 fps but i think it could go higher,i install the driver and same,idk help
![Gigabyte RTX 4060 Gaming OC Review [Benchmarks | Power | Thermals]](/img/n.gif)
Apologies for the face cam quality new lense and haven't got the focus dialed in yet and I was rather over exposed in the footage.
What cpu do you have
@@Victorrodriguez-bh6lv Ryzen 3600 bit going to upgrade to 5600 in the new year
@@thefullsetup nice man, just picked up a rtx 3060 ti and I have ryzen 5 3600 too, it's still a pretty good combo
what case you have?
can u plz recommend the power supply needed for it, I am actually looking forward to getting it.
Amazed on the eloquence you had putting that out there to the world right on!
Thanks
Just bought this card the other day on sale for 550$ CAD :) loving it so far
Is it a quiet card while gaming?
Jus got it 380 cad 😎
And I just got it today, new, for $355 U.S. Dollars...lol
Can't wait to install it and start playing 1440p..!!
@@realityfitnessfyt4lyfe248 oh that’s sick, what website did u use?
I found it on Amazon.
I have a Gigabyte 3060ti (it seems like it is the same model)
OC with msi afterburner
core voltage +50
power limit 104
temp limit 90
core clock to +150
memory clock +1000
fan auto
It hits from 1770-2100mhz and play stable at 2070 or 2085
Anything should I worry about these settings? I'm new to OC world.
still using the same overclocks?if yes,did you run into any problem?what temps do u get while 100% gpu usage?
Still using the same settings?
Seems like he burned :D
Lol Don't do oc , if yo don't know , never touch memory clock
I love this card it been pushing with raytracing with my 5600x .. I just need to water cool the 3060ti
Hello there,,, I have the same card, with 5600x cpu, what I noticed about the card is that when temp of gpu falls down to 36, all fans stop working. When it goes up then two of them are working. I haven’t noticed if I go up to 70 degrees if third fan will work… is that normal?
The card has a silent mode is the bios that does this to the fans
The good old times when you could get a 30 series card at MSRP .
Go to best buy and see if there is any cancelled orders. I just got this card yesterday by doing it
which psu are you using?, mine gets super loud on full load so i am looking for something better, which one would you recommend?
A good 650W with a decent power efficiency rating is my recommendation:) A reputable brand is a must, unless you want to cheap it and risk taking out other components or not being able to power your system stably.
I bought this card and it is a jet engine on 2000 rpm. Had to lower it to 1500 rpm and 82C.
You can't just bump the frequency and claim you have a Gaming OC PRO. the Gaming OC Pro has a different power delivery and and a higher maximum power limit than the Gaming OC. The OC Pro runs stable beyond 2100 core clock
He was saying essentially he had achieved the same stock OC that version would push. Practically he wasn’t wrong either. He wasn’t saying his cards hardware changed to that of the other card. He was saying the extra core clock that the card ships was exactly what he had on his card too.
You’re trying to tell him something he’s well aware of 😂
@@timothyjn100 those % increment you get from oc & oc pro, is negligible tbh
IS the only way to stop RGB to de-solder the LEDs?
I have a CV 550 PSU will it be enough for this card?
Rest of the specs are:
Core i5 10400f
B460 Tomahawk
16 GB DDR4 2666 mhz
Yea it will, i have an i5 12600k on an Asus Z690 Prime mobo and an RTX 3060ti MSI Gaming X Trio and i am at 430W and have an EVGA GQ 650W Psu.
@@kingstarlp3067 thanks!
I am planning an upgrade from aorus 1080ti, will this card be a good upgrade?
sure , the rtx 3060 ti its like a 2080s
Nice unboxing, your pc setup looks really cool.
Cheers mate you good?
Entries in gold, love it, i got a question, the entries are in gold, is it make a better connectitvity?
Does this card have any stickers to remove before installing it into your PC?
what is the cpu used in the test
Did you ever try undervolting it ? These 1x8pin cards can sometimes perform better with slight undervolt like 950mv you can actually get a better overclock this way cause of the low power limit. Anyone got more info about this ? I found this model at a good price so wondering if I should add more money to get a model with 2x8pin power.
MSI 3060 ti gaming trio vs Gigabyte 3060ti gaming. which one should i go for?
msi if you have no limited case space. i my self considering the gigabyte for its compact model, slimmer and thinner, sould be fit for majority pc build
@TheFullSetup So finally do you recommend this card? As far as i know it's a very good 3060ti and i found it in a reasonable price in my country. Would you recommend it?
Hi! I have a question about the card, wich is where is the 8pin located on the pcb, from the display outputs?
It’s located on the side that faces outwards towards you, looking in, and on the right end. More so towards the centre on this card however.
Question though? He shows the card in this video and talks about the 8 pin and it’s location, so what did you miss exactly?
What air cooler fan do you uses sir??
I have sessonic 620w M12II evo 80plus bronze modular ,enough for this card ? Tnx 😊
I have the ASUS RTX 3060Ti Dual OC
Currently copied the fan curve from asus’ software over to msi afterburner and have the card running at:
+170MHz core clock speed
+1180MHz memory clock
Maxed out power limits and allocated max mV’s to get it from +150 to +170.
Should I drop it to +150MHz to achieve my OC without touching mV’s? Or as I’ve heard, MSI afterburner cannot damage your card as it’s only touching what the card allows, and therefore I don’t need to worry about anything as long as it’s stable and not artefacting?
Any input my fellow overclockers :)
Great vid , how much is the standard UK prices for a 3060 ti ?
Currys have them advertised for £420
I made the mistake of buying 2nd hand, can't say how much I paid just needed a card 😅
hello, is it better to use a single 8pin connector for the 3060ti or a split 8 pin to psu ?
Would also like to know this!
Does it make a difference?
@@MrMMFury yh because it receives power differently
I tried getting a 3070 on release with zero luck then i I tried with the 3060 ti with zero luck. I hope I can get one ln January 🙏
You know there will be 3070ti and 3080ti sound better deal to me
I'm sure you won't have to wait to longm honestly I didn't think I was going to be able to get one till next year so was just going to play the open world games on geforce now for a couple a months.
@@intech7863 as if you can get one of those
@@SaigaTenshi in Spain we have third party app for sales like ebay its the Wallapop name Spain and Portugal.
In this app people sell brand new rtx3000
Hi, thanks for the video. Wanted to ask about the case, which one is it?
Deepcool matrexx 3f
what kind of pins did you get for the 3060
Mine MSI 3060 ti is just crashing in the userbenchmark test with just +200 core clock and +50 memory clock. Any ideas? :/
Way to much core clock overclock 100mhz would be a better start
Bro get the aorus 3060 ti master and review it pls
It’s the same shit basically
What is that msi bios r u using??
For some reason I can't access the Kombustor, it's greyed out. Need help pls
Can u please tell me what desk you have cuz it’s so dope
IKEA Alex linnmon in grey
@@thefullsetup bet yo thanks ima cop one
What game were you playing in the video
Hi bro. I have the OC version too. Have you tried undervolting it?
Just sold my asus dual rtx 3050 oc to buy this, is it worth it?
What does it sound like
I have the same card and I feel it is loud as hell. The fans wont start up either if they don't get 50% or more. When they are spinning I can turn them down to about 30%. I am running them idle on 45%, pretty silent, but 65% or more the sound gets really high.
That's odd mines good I'd say 65-75% I can hear them in my system but certainly not loud as hell more quiet but not silent. As soon as they go over 80% that's where these suffer from having smaller 80mm fans as the coil wine starts to kick in on my card.
I bought it also and yes, it is very loud at 2000 rpm. Lowering it to 1500 rpm and 83C did the trick...
@@VedranKlemen how to do that ?
@@adhipradana25 With Aorus Engine software.
The temperature ? Is it too high ?
Hi man! I'm a video editor,working on premierw pro. I was thinking, will this run good on ryzen 5 3600x for editing?
Since Adobe added hardware encoding for Nvidia GPUs in premiere my 4k render times went from half an hour to 10-15 minutes with a Ryzen 3600 non x
same seting on my 3060TI founders 2100 stable
Where can i buy it if i'm located in Europe because i don't wanna pay for the thing you need to pay if you order from outside eu
question , i orderded a new 3060ti from best buy ,picked it up, paid 599 plus tax and when i went to open it had no plastic on box, then when i opened it it had been opened and only a yellow sticker holdng the bag shut. i repaced a rtx 1660 super and dont really notice much of a difference. the 3060 fans do not start with pc andit gets really hot on the outside of it ,ith the fans never starting on ultra settings? called best buy and they said i could return but i cant find anouther. just a little nervous on card being open box
The fans don’t start on startup bc most stock fan curves don’t run fans at idle temps. And the gpu getting hot on the outside is fairly normal if you’re using 80-100% power.
No warranty sticker?
Is this configuration good for a pc gamer? I’m new in this pc gaming world. Thanks
Asus ROG Strix x570-F Gaming ATX Motherboard
PROCESSOR
AMD Ryzen 5 5600x (6 Cores, 12 Threads), 35Mb Cache, TurboBoost up to 4.6GHz
RAM
Corsair Vengeance DDR4 32Gb White (8gb x 4) 3000MHz
GRAPHICS CARD
Gigabyte GeForce RTX3060 Ti OC 8Gb
CPU COOLER
ID Cooling 240mm AIO Liquid Cooler
HDD
Not included
SSD
WD SN550 1Tb Rocket NVMe PCIe M.2 2280
WI-FI
WiFi 6.0 pre-installed
BLUETOOTH
BT 5.0 pre-installed
POWER SUPPLY UNIT
Adata XPG Core Reactor 650watt 80+ Gold Fully Modular Silent Power Supply Unit
CASE
Corsair 4000D White ATX case
CASE FANS
120mm ARGB Silent PC Case Cooling Fans with Aura Sync
OPERATING SYSTEM
Windows 10 Pro.
Most of it looks really good...The only big thing i see holding the system back a bit is the RAM. Its only 3000mhz , personally I would have at least 3200mhz or even better 3600mhz. The other thing inoticed is the SSD thats wierd what you put. A "Rocket" is Sabrent brand (i personally have a Sabrent rocket and its awesome) If your using a WD then it might be a bit slow...WD M.2 drives seem to lag behind other drives sometimes
@@anthonylong5870 what you recommend to be change? Many thanks for your answers
@@andonigameplays9751 The RAM first...Get at least some 3200 speed and even better would be 3600....See what that does for you 😊
@@anthonylong5870 can you tell me what are the best and compatible with my motherboard?
@@andonigameplays9751 Any brand will work with it but I myself like Corsair or G Skill . Just look for DDR4 3600
I have the same gpu, and the power consumption is always wrong in programs like gpu-z or HwInfo. Always shows 6,5W at full load. If i change de power limit in msi afterburner nothing happend. In the wall is always showing 210W.
Same Issue here, mine doesnt clock as high and never really goes above 100% power limit but still says its limited. some Zotac cards had the same issue but they got a bios update to fix it.
hello will this work on corsair psu cv550?
ryzen 3 3100
16gb ram
thank you
NVIDIA site says to have at least 600watt psu for a 3060ti
How quiet is the GPU? I heard it’s louder than the gaming x trio and tuf gaming OC cards.
It's really quiet I imagine those two would be better as they have bigger fans. Like I said in this video it's certainly a small 3 fan GPU but I have been gaming on it most the weekend and I can bairly notice it. If you push the fans to max there is some coil wine but 75% and under its virtually silent
@@thefullsetup It is still a 3 fan gpu. I don't really buy beefy gpus for thermals but because they usually have less noise
@@thefullsetup from gtx 1070 G1 gaming, 1080 G1 Gaming, and now 3060 Ti gaming, they have similar fans, and still...similar coil wine problem. but its ok, my 1070 still works perfectly
Which drivers did you use? I don‘t find one...
The latest ones from Nvidias website.
Mine is only giving 80-90 fps in gta 5 1080P😪😓😓 I thought it would give an avg 120-30 fps😓😭
waiting for your oc tutorial on this same card
Same
ua-cam.com/video/3XrwPJ-bzYU/v-deo.html
Enjoy
Mouse?
I have this exact card but mine has an additional 6 pin connector, why is that?
I have the same card, I think the Rev3 added the connector. Though I’m not sure what it’s using it for if this guy’s card doesn’t have it.
What is the diff between PRO version and this version?
10% more chicken dinners
Is that a sag bracket that's sitting right by the GPU with all the RGB ?
Yes although it's more for show now as I lost the clip for it.
@@thefullsetup Is a sag bracket needed for the card?
@@yooslippp no
Hello mate recently purchased this card I'm aware this video is fairly old but I attempted to use a 6 and 2 pin connector only for the display not to work after that I replugged them now with the display working and the GPU not registering, the fans would turn on for a split second once the PC was turned on then they'd switch off any solutions for this?
same problem
How many watts is your psu
i have same card rev 3.0 it is overheating
i can only add maximum 800mhz to memory clock and i did +220 on core clock, if i go higher with memory clock it crashes :c i have a gainward rtx 3060 ti ghost, idk what settings to use to lower temps and improve performance
Download GPU-Z and see if you have Samsung or Hynix memory. Hynix memory can't overclock as high
Does someone know the size of thermal pads for this GPU? Would help a lot!
hi did you find out the sizes?
i Have the same graphics card and i have 2 PCl power adapters, how?
You have the oc pro model
My 3060 eagle is super loud and have a slight rattle when the fans ramp up
Max temp on eagle ?
@@HimanshuSharma-lo9cu I've seen it hit 62
I have gpu usage problems and big fps drop on 3060ti eagle oc and ryzen 7 3700x do you know why... Ive try everything with no luck thinking to return gpu to store
I've got the 3600 and it's not maxing it out in some games at 1080p my battlefield has some dips down to 80% usage. Which is sort of to be expected on a Ryzen 3000 with a 2080super level card at 1080p your going to have bottlenecks in some games. What's your ram config like on your setup?
Got 16gb ram, im usualy playing 1080p i just bought this setup so shall i try with some other cpu?
@@toniskaro2761 what's the speed of the ram? Is is a single stick as that's bangs performance. Also I would look into Ryzen dram calculator and set all your ram timings manually can end up with a nice performance boost. Just be prepared for a few crashes and blue screen while you get the ram timings dialed in perfect.
Got 2x stocks i think 3100 not sure, shall i enable xsm or something like that in bios or shall i put it on auto?
@@toniskaro2761 oh yeah you want at least xmp enabled otherwise your ram will be running at 2133 which will be a big part of your frame drops.
how did you unlock Core Voltage?
In afterburner setting there is an unlock voltage option although it didn't work with the 3060ti till updated to the latest beta of afterburner
Hello, I was able to get this card recently and Im pretty new to overclocking. If you dont mind, could you answers some questions for me?
I have a i5-10600kf and a seasonic 650W 80+ gold, is the psu good enough to overclock it? Will it be okay to overclock it the same way as you and have it not make anything die or have reduced lifespan?
Should be! They recommend a 600w PSU so you’re within spec. Overclocking is usually safe just don’t overdo it. It sometimes does reduce the lifespan of your components depending on how much you push it.
For that setup 650w is more than enough, just don't touch the voltages when overclocking your gpu because that is the only thing that could damage it if you don't know what you are doing. Also remember not to add the overclock profile to start on default before you know it is stable!
perfekt card for my louqe ghost s1
Whats the thing under ur monitor
It's a Kork nano kontrol I use it to adjust my levels in voicemeter
hey man please help me i wanna buy an i3 4170 and a gtx 760 windforce x3 4 gb dose bottleneck or is not please tell me what should i change
No they will pair fine but I wouldn't be expecting to play a any recent triple A titles on them. It will be fine for e sports games but not a lot else.
@@thefullsetup i wanna play gta 5 and five m rocket league csgo minecraft watch dogs 2 i dont know if it will work
@@thefullsetup thx man
@@thefullsetup and is good a psu 650 w for the video card an processor to work?
@@7young1303 tgt wont work
that white cable looks so cheap and takes away from the pc looks
i got it used for 220$ Gigabyte 3060 Ti 3fan oc (rev 2.0)
Yes
Got really bad fan rattle on this. Annoying
I just have one criticism, why the hell would you play Cyberpunk?
It's a good game for testing gpus as it's pretty demanding
so i need a little bit of help,i have the same gpu and i m playing msfs2020 at any settings low,high at the same 20-30 fps and idk why and in overwatch i have 85 fps but i think it could go higher,i install the driver and same,idk help
What's ur pc specs, could be drivers too
@@portuga3984 i have i5 10400f,rtx3060ti,16gb ram 3200mhz,and 1T ssd
@@thelazypilot8949 Try reinstalling the game
M8 free hundred quid are you takin the piss m8 jk I love the accents of y’all ppl man 😂
Farken woffle woffle mate
The only thing i dont like is the power placement
I dont use Heaven to verify OC/UV anymore. Its a waste of time. Metro with RT or Quake2 RTX demo is way to go, cheers.
Well thsoe settings work with every game I've played so far on it so looks like it works fine 😁😁
A lot of potential for fighting against covid19 through BOINC and earn some Gridcoin.