Making a 2D gear in AutoCAD
Вставка
- Опубліковано 20 лип 2024
- Download the free AutoCAD practice drawing eBook containing the fully dimensioned drawing used in this video here: sourcecad.com/autocad-practic...
In this video, I will explain the simple method of making a 2D gear profile in AutoCAD.
Download the free AutoCAD practice drawing eBook containing the fully dimensioned drawing used in this video here: sourcecad.com/autocad-practice-drawings-with-pdf-ebook/
which unit did u use for this drawing ?
Sir I want practice for bus interior and exterior layout design
Thank you so much for all your exercises you're doing for us ,when I'm free I'm doing some of your exercises and it has helped me a lot in my studies
I just want to say , you are the best at explaining AutoCAD it has been so hard for me to learn but after you taught me
It’s so much easier
Thank you. I learned a few new commands following along. Also, please explain how you came up with the reference dimensions in the future. We would like to replicate this method with other gears of different dimensions...
FANTASTIC STEP BY STEP IT ALL ADDS UP . Thank you
Thanks for the great video.
Where did you get the original unit sizes from ?
Another great tutorial.. been following these tutorials a while now and im starting to get pretty good and fast in it.. all thanks to your tutorials..! great job you doing!
Very helpful, fast and precise, very thanks!
where can I find a data sheet for the circles and offsets numbers for different gears like the 8 tooth gear !!!?
please help me .. I have a homework on this !
can you please explain how those dimensions are taken in brief
Hi. Thanks for this nice tutorial. How can I turn a spline into a polyline on autocad 2008? And what happens if I don't convert it? What's the purpose of you doing it here?
I still can't understand this. I'm using a 2020 cad . I've done the same way you did still I couldn't get the one in the video . How come I can't even copy a thing
Great video!!! As we would say in high school "the dreaded gear lesson"
Im having an autocad hiring job test in a couple of days. Which drawings u think i should practice?
I'm truthfully surprised it's even that involved and not just a matter of selecting a gear tool and entering in the measurements you need
Love your content. Helped me understand how to use AutoCAD even more!
We can try to open and edit the drawing with our mobile phone
sir could u plzz upload video on how to draw dome structutre in detail
You should explain the explode button while making fillet
What is the unit you used in this drawings
How to get fillet? I dont know whats the formula for it. Anyone?
How to use short cuts.and explain detailed ,i can't understand.
In what units is this drawings?
Thanks
Hi! I am a beginner and I already have problems in how to make this sprocket. Could you show me how to do it, on a video?
I really will appreciate your help.
Begin by drawing the 12.25- and 11.25-diameter circles centered on the same point near the middle of your display.
To construct the sprocket teeth, draw a line using the Quadrant object snap to locate the point at the top of the 12.25-diameter circle. The second point can be straight down so that the line crosses the 11.25-diameter circle. The exact length is insignificant because you will trim the line back to the inner circle.
Offset this line .1875 on both sides.
Trim the first line, and trim and extend the other two lines to the inner and outer circles.
Create a polar array of these lines and trim them to create the teeth.
Draw the 10.25 B.C. on the Centerline layer.
Draw a line from the center to the quadrant.
Use grips to rotate and copy the line to 30° and 60° for the 0.75-diameter circles, and 20° and 70° for the inside cutout.
Draw two circles where the centerline intersects with the bolt circle.
Construct a polar array to get the proper hole pattern.
Draw the 7.44-diameter circle and the 3.25-diameter circle.
Trim to construct the cutout geometry.
What if I want to rotate this gear
While using array how can we justify the distance between 2 circles?
dimensions are different because mine was a bit smaller. I referring to the circles they have more space than yours.
Sir how can u decide dimensions of all.. plz sir give me idea about that plz 🙏
You can read it in Mechanical Engineering Books for Theory of Machines
This video is very helpful!
Specific dimensions may help us a lot.
nice job, buddy..
Thank you dor this wonderful explanation sir. Can i know why should we use a polyline instead of a line in that place?
Simply great..👍
Thanks Mr.
Excellent work done.
I hope next time, to explain how u select radius size
@@user-cv6xw2ej3p Read Mechanical Engineering books for Theory of Machines
pls tell why the offsets are different and why three circles what are these circles called
awesome video my dear brother
U didn't tell how to calculate those offset values based on given gear profile values...
Why did u change the spline to polyline? And can we not use offset commands instead of construction lines
Do you know why we do the polyline?
great videos thanks a lot.i wuuld like to make a question. you choosed the distances between the constructions line by your self?or you calculate them somehow, because there are 18 teeth in the sketch. in your site it doesnt define the distances
Hi, I think I can answer your question. A gear of 18 teeth at 3.333" outside diameter would be a 6DP gear. An 18 tooth 6 DP gear has a pitch diameter of 3.000" .Which is the figure used.
He has set the chordal thickness at 0.260". This equates to a pressure angle of 14.5 degrees. All this info can be found in the Machinery's Handbook.
I must be missing something though as I make the root diameter to be 2.614" not 2.571".
Plz script kese banaye vo detail me batae
in minute 5:18
I don't know why did you convert spline line to polyline
you can make Arry on it without converting.
thanks
Do you know why we do the polyline?
you're a god. Thank you.
Great Video !!
Really very helpful 👏
Hi I am working in an Automatic Doors company in GULF county I want to know how to draw isometric view of roll-up doors with it's profile
Tx for sharing
In these video I learned more about polar array.
*this
Can you please explain how to disable the associative feature in AutoCAD 12? It is impossible to insert the fillets on the sprockets with this feature which is the default and I do not know how to disable it. Thanks
please show the dimensions in the first plan of object you are showing
You should explain why it has that dimensions. It makes the viewers confused.
The values doesnt matter , you can use arbitrary values.
can you tell me how to take the units for the tooth
write unite in the beginning then chose unites you need it
Thanks so much bro..
Nice presentation
Thanks for you.
Thank you
Why is that associative needs to be turned off when doing polar array?? What is its function?
Astonishing
0.062 ???
Bro for 3:58 that fillter not working and .. Both lines are not joined y bro ?
great video
I have your pdf....in that pdf drawing no 24 I have the dimensions for this gear..but I don't know how to utilize that dimensions
Could you pls share the pdf?
Your plans are better please draw some more plans in civil
Thanks for help me
I tried many times but fillet command is not working.
Thanks!
why did u take .047 as offset
Thanxxx... Bhai
I bought your course on Udemy! Thank you!
Thankyou sir!
Awesome
please specify units in the diagram like in old examples
For this example, it doesn't really matter what the units are, as long as you are consistent. you can use mm, inch, meter, etc.
Good Job
Nice
please explain where i get dimension
D enter
Sourcecad. Con
Very Goods Job
Sir fillet nhi bn rha 3.57 minute pe
Thanks
hi sir thank you for this tutorial, I learned a lot of new commands (for me). but you are going too fast. I guess because I am a beginner. hopefully next time please slow down. thanks again
كيف؟
Tq
why is the associative option kept unchecked ?
FREE sheet metal, gears, curves and others
www.onlinecadtools.com/myindex_en.HTM
www.onlinecadtools.com/english/html/sheet_metal/index.HTM
www.onlinecadtools.com/english/html/index_gears.HTM
www.onlinecadtools.com/english/html/index_curves.HTM
www.onlinecadtools.com/english/html/index_st.HTM
ua-cam.com/video/7W1_jJ1XWzo/v-deo.html
ua-cam.com/video/T-irEOEON2w/v-deo.html
Thanks!
I need advertising and orders
FILLET CAN'T USE
which version do you use?
2016 ok thanks bro now i am understand
hi.. Doesn't seem to work in LT2018 either
@@onlooker251 try 2019 or draftsite
@CAD Baselines no
Bravo 👍
nice
why can you use fillet? HOWWWWWW? T_T
Explode the array and then use the fillet, it should work.
it just looks like a gear.
can us fillet
Explode the array and then use the fillet, it should work.
Very good
Isnt Accurate.. You need calculation
sirrr i cant use fillet command on these teeth
nice and easy
Thanks Chaitanya
this is very hard
Fillet comment not work
To be honest, not enough explanation. "Click this, chick that, chick this" is not a good tutorial. We don’t know what these things are, you need to explain at each step.
I understand that as a beginner you need to know a lot about different tools and commands but explaining them in a practice video like this one will make it of more than one hour and that is not always good for all type of users who are already aware of those basic tools. Still here is a free set of AutoCAD basic videos that you can follow to learn all about the basic tools and commands. www.thesourcecad.com/autocad-tutorials/
@@sourcecad problem isnt about commands and basic tools .we beginners dont understand drawing..you should explain how do you get this number what are you drawing.
best regards
if i unrolled some of this course for nine dollars ,do you explain in one of this course how to better understand drawing?
@@sourcecad your explenation too bad you arent good teacher , you need to do some thing better
Abang abang india emang beda
your measurement on your free book lacks given,you didnt put the .062 radius on root
fillet
Agree 👍
Your channel looks great, thank you, subscribe to your channel
It's very complicated way...there are some easy way in you tube
What a long winded way to create a spur gear, For Mechanical design it really needs to be a Parametric Mcad software such as Siemens Nx or many others. 2d is a pain in the arse.
H
Con
hello sir