Розмір відео: 1280 X 720853 X 480640 X 360
Показувати елементи керування програвачем
Автоматичне відтворення
Автоповтор
*ATTENTION!!!*One important point here is about the pressure angle and also the tangent, where the 4th circle will be on the tangent and the lines you draw after it.Great video, I just made a 107 teeth gear.
This video is the best one for 2D making of gear. Thank you!
2:42 why did you use 20º to rotate the line? where did you get the 20º from?
I didnt understand 3:59 -4:02 section ..the line ends where?what is the end point of line
actually he has taken the tangent point to that circle
This is automatically show tangent
Great example 👍 thx so much!
This works great! Thank you very much!
at the last , after all trimmed , why you taken fillet radius 3 specifically ? is there any calculation for the same ? , please reply
Same I would like to know as well. But highly doubt this person would bother replying.
is the 20 degree rotation standard angle to rotate or it changes with with dimensions and one more thing 1.125 multiply also standard
Great video
Why hf=1.125*m instead hf=1.25*m?
Great video, thanks. While using polar array It will be better if we include one complete gear tooth, then we don't have to delete each segment!
How can you add a Pressure angle factor ?
Good question
After putting the tooth thickness of 15.7mm, what you have done I have not at all followed!
actually he has taken the tangent point to that circle you can also try that
Can be operate to Gear?? 3D Printing Gear?
hi can u help me making involute tooth profile?
Please provide 2d drawing of helical gear and it's formula like this video
Thank's a lot ...
I've tried it but didn't works for some module.....
For 3D gear with calculation pleas referua-cam.com/video/S7yWMUCVU8M/v-deo.html
what about the base circle ?why haven't you calculated and used the same in the drawing
How to find the no. Of teeths??
Can u please draw with following parameters Pressure Angle-30°OD 37PCD 32Module 4ID 23No of teeth-4
that's not a spur gear though
Sir How to make chain sprocket in 2d will you please tell me whithe calculation of sprocket
Bro why we rotate 20degrees? Is it a fix angle for gears?
Why turn the straight line 20 °
He drawing normal gear. Normal gears have 20 degree pressure angle. Line is for finding base circle.
@@ismailislamoglu7287 thank you
It doesn't work for 2.5 module gear
It's Working for me!!
It doesn't work for me either, I have a 3 module gearDo you know how to do that?
worm gear or worm wheel ki video upload kro sir
okay bro i will upload today
Please send the pdf of this part and word to me
I get very confuse by 4:00 and so on. Waste of my time watching and doing this..
I think he takes circular pitch(31.4) not tooth thickness
I don’t think so it was 31.4...I can see above 41.2
![[오토캐드(Autocad) 기초 3D 47강] 2D/3D 기어(Gear) 그리기](/img/n.gif)
*ATTENTION!!!*
One important point here is about the pressure angle and also the tangent, where the 4th circle will be on the tangent and the lines you draw after it.
Great video, I just made a 107 teeth gear.
This video is the best one for 2D making of gear. Thank you!
2:42 why did you use 20º to rotate the line? where did you get the 20º from?
I didnt understand 3:59 -4:02 section ..the line ends where?what is the end point of line
actually he has taken the tangent point to that circle
This is automatically show tangent
Great example 👍 thx so much!
This works great! Thank you very much!
at the last , after all trimmed , why you taken fillet radius 3 specifically ? is there any calculation for the same ? , please reply
Same I would like to know as well. But highly doubt this person would bother replying.
is the 20 degree rotation standard angle to rotate or it changes with with dimensions and one more thing 1.125 multiply also standard
Great video
Why hf=1.125*m instead hf=1.25*m?
Great video, thanks. While using polar array It will be better if we include one complete gear tooth, then we don't have to delete each segment!
How can you add a Pressure angle factor ?
Good question
After putting the tooth thickness of 15.7mm, what you have done I have not at all followed!
actually he has taken the tangent point to that circle you can also try that
Can be operate to Gear?? 3D Printing Gear?
hi can u help me making involute tooth profile?
Please provide 2d drawing of helical gear and it's formula like this video
Thank's a lot ...
I've tried it but didn't works for some module.....
For 3D gear with calculation pleas refer
ua-cam.com/video/S7yWMUCVU8M/v-deo.html
what about the base circle ?why haven't you calculated and used the same in the drawing
For 3D gear with calculation pleas refer
ua-cam.com/video/S7yWMUCVU8M/v-deo.html
How to find the no. Of teeths??
Can u please draw with following parameters
Pressure Angle-30°
OD 37
PCD 32
Module 4
ID 23
No of teeth-4
that's not a spur gear though
Sir How to make chain sprocket in 2d will you please tell me whithe calculation of sprocket
Bro why we rotate 20degrees? Is it a fix angle for gears?
Why turn the straight line 20 °
He drawing normal gear. Normal gears have 20 degree pressure angle. Line is for finding base circle.
@@ismailislamoglu7287 thank you
It doesn't work for 2.5 module gear
It's Working for me!!
It doesn't work for me either, I have a 3 module gear
Do you know how to do that?
worm gear or worm wheel ki video upload kro sir
okay bro i will upload today
Please send the pdf of this part and word to me
I get very confuse by 4:00 and so on. Waste of my time watching and doing this..
I think he takes circular pitch(31.4) not tooth thickness
I don’t think so it was 31.4...I can see above 41.2
For 3D gear with calculation pleas refer
ua-cam.com/video/S7yWMUCVU8M/v-deo.html
actually he has taken the tangent point to that circle