✨Fridgidaire Gas Oven Won’t Bake - EASY QUICK FIX✨
Вставка
- Опубліковано 22 сер 2024
- ✨ Fridgidaire Gas Oven Won’t Bake - EASY QUICK FIX ✨
Easy way to replace an oven Igniter.
Click here to order a new Igniter: HERE TO ORDER A NEW IGNITER FOR UNDER 20.00 : amzn.to/3sIM1QG
-If My Advice Has Helped You to get your Oven Baking Again…
Please Click Here To Donate: www.paypal.com...
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
✨ If the video was helpful, remember to give it a Thumbs Up 👍 and consider Subscribing. New videos every Saturday ✨
-Subscribe Here: / @scottthefixitguychannel
🛠- Do You Need Any Additional Help? Become A Member of Our Channel Today and Get LIVE HELP from Scott With Your Appliance Repair. Pick #1 FIX-IT FAN for Just $4.99 and get Text, Zoom, Email or FaceTime Live Help. Non-Members pay $45.00 for Live Help. Just $4.99 for Channel Members. Click Here to Join Today: / @scottthefixitguychannel
-Facebook: / scottthefixitguy
-Twitter: / scottthefixitgy
-Instagram: / scottthefixitguy
-UA-cam Channel: / scottthefixitguychannel
-GREAT PLACE TO ORDER O.E.M. Genuine Parts for Your Appliance - Click Here: fix.pxf.io/MmrxYY
-Need Expert Appliance Repair Help Today? Click Here:asqme.com/@sco...
-Good Place to Buy Parts: bit.ly/3wD4L5W
-List of Tools used by Scottthefixitguy: • ✨ Scott The Fix-It Guy...
-Need More Expert Help with Your Repair? Click Here To Schedule a 15 Minute Meeting with Me Using Zoom 💻 : calendly.com/s...
Disclaimer:
Because factors beyond the control of Scottthefixitguy, I cannot guarantee against improper use or unauthorized modifications of this information. Scottthefixitguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Scottthefixitguy recommends safe practices when working on appliances and vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Scottthefixitguy, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Scottthefixitguy.
Thank you 😊 *
*
🐔 Check Out Our New Channel Dedicated To Showing How To Raise Your Own Backyard Chickens: / @raisingbackyardchickens ***
***
Scott The Fix-It Guy - Appliance Repair Videos Do you need More Appliance Repair Direct Help from Me? Visit me at:AsqMe.com@ScottTheFixItGu and I'll help you get your appliance working again quickly.
Scott, what is the part called that the igniter light..(medal bar in the middle) I've replaced my igniter twice and it works for a few weeks then stops again.
Hi Charles, that tube that the igniter mounts to is the burner tube or Venturi 👍💻 New Appliance Repair Blog - lots of DIY Fixes for Your Home Appliances - Click Here:
ApplianceFixes4You.com
Had a 4 year old frigidaire . I suspected it was the igniter with the sympthoms. I also didn't want to pay a tech hundreds of dollars to do something I can do in 20 mins. I watched your video and ordered me the part off amazon. Within two day I'm cooking again. Thanks again.
That is excellent to hear,
Thank you so much for your feedback
Thank you for posting this video. Got the part for $44 at an Applicance parts store, and now the oven is working!
Awesome Wally, thank you😊😊😊
I have a Frigidaire gas wall oven that took over 30 minutes to preheat, quit maintaining a high temperature and it smelled like there was unburned gas while baking. I checked the oven igniter resistance and it was low so I replaced the igniter with a $25 replacement from eBay. Now the oven works better than it has in years!
I followed your every steps and my oven is back to normal. Thank you
Thank’s So Much Ken, I’m so glad it worked and saved you time and money😊 I hope you’ll click here to support us by joining our Channel: ua-cam.com/channels/7fBqy8806u1r0NpPv_fQ2w.htmljoin
You’ll get Live Appliance help when ever you need it.
It’s just $5.00
Thank you so much for the straightforward instructions and the link to the part. My Fridgidaire model had its nuances that I had work through, but the overall tutorial was solid
Thank’s So Much Chad, I’m so glad it worked and saved you time and money😊 I hope you’ll click here to support us by joining our Channel: ua-cam.com/channels/7fBqy8806u1r0NpPv_fQ2w.htmljoin
You’ll get Live Appliance help when ever you need it.
It’s just $5.00
My man didn’t even turn off the power true mad man
You guys should unplug it. I leave the power going to show more light for the video, but you can get a shock😬⚡️
Great job , you explained everything very good,👍 I'm not sure if our fridge dare was a lemon because it faulters in only two years of buying it.
Thanks George,
Those igniters can burn out pretty fast.
It just depends on how much the bake feature is used.
..Scott..Thank You, Sir--very much...your video/presentation, is excellent..clear, simplified..
..my "Sears/Kenmore-range" shares-similarities-- it had "become slow/reluctant" prob 6 mo's-ago-- Id have to "pre-heat ( try-to ), multiple-times", 3, 4, 5 X..?..I looked-under-oven in broiler-area--- "yes--> my ignitor still "glowed"-- but--> apparently, "not "hot-enough", as I found-out--
--watching "some other vids"--- they were all helpful--def helped in "diagnosing"--BUT-- most all of them, quickly "mired-up" with, "rather-confusing/intimidating" & differing-ideas on "the replcmt-wiring"....I understand some "basic-electronics-concepts", still-- most of those other-vids, kinda' convinced-me-- " I needed to have this done by a "Tech-person"..?..
..Id bought the "ignitor-part" maybe 2 mo's-ago-- but "findin a Tech", (reasonably) in WV, as "we emerge from the "pandemic"--was "discouraging"...
..meanwhile-- it would "sometimes work, sometimes-"not"...lol...def discouraged "use", and def had an impact on "meal-planning/menu's" for the household !
..Thank the Lord, I was once-again "lookin into-it" and, came-across your Vid, yesterday-- wow !
..your Vid inspired me; gave me confidence, to "give it a shot"...lol...voila ! Success !
.. comes-on & heats-up quickly ! chicken pot-pies & frozen-pizzas, are "back on our menu" !
..I wanted to get back on here & tell you, "Thank You, very much", & commend-you for your clarity & simplification-- for you, "making the effort" ! rock-on & God bless you !
Awesome job, you did it😊😊😊🎉
I appreciate your video very much,oven is fixed and am about to cook a good dinner, thank you sir!!
Wonderful!
Just what I needed! I appreciate the detailed information. Our Frigidaire Gas Oven is now working like a champ.
Awesome,
Thanks Jerry👍
Fixed it in less than 15 minutes thanks brother
You’re very welcome😊
Thank you! You helped me fix my oven so Easter dinner can still happen. 😊
Awesome news,
Thank you😊
Thanks!!! Just replaced the igniter. All is good. Great instructions and demonstration.
Thanks for the video. What if I replace the igniter and the oven section still does not respond?
Thanks J.L.
What do you notice when you turn on the heat for your oven?
@@ScottTheFixItGuyChannel
There is the clicking once I select bake, then no sound of gas flowing or glowing from the igniter itself (no response)
Did you ever discover what the issue was - I’m having the same issue.
@@ScottTheFixItGuyChannelScott any idea on next step?
Great vid..havent recieved igniter yet but did take apart to make sure wires didnt come apart... and since this igniter wasnt spliced in , i no this is the original part and needs to be replaced thanks for the vid
You’re very welcome 👍😊
@@ScottTheFixItGuyChannel it use gas too
Thanks 🙏🏾 alot my stove is working like a champ now I would be subscribing to your channel
Thanks so much Marlon👍😊
An exact fit. $70 part saved me $500 on a new oven!
Awesome,
Thank you😊
Hey Scott, quick question, i recently replaced my Igniter and that seemed to fix my issue, but all of a sudden my issue has come back. let me describe:
1) turn oven on 400, cook a frozen pizza to completion, ingitor does a its job and start way quicker than my old one.
2) turn off
3) wife gets home and tries to cook something, turns on for a min, then shuts itself down.
4) retry starting the oven and the ignitor doesnt even glow, oven shuts itslef off again
Thanks Randy,
Might just check the leads coming to the new igniter. Might be a controller that’s wearing out.
Very helpful and very easy fix thank you
You’re welcome,
Thanks for the update😊
MOST EXCELLENT video!!!!!!!!!!!!Thank you so much. You saved us big $$$$$$$$$$$$$$
am I good to use the stove top burners while waiting for part after disassembling to get the bad oven igniter out?
Yep, you can use the stove top👍
I already cut my old igniter out but waiting for new one in mail . But can i still use my stove top while I wait for igniter ? Would that be an issue ? Btw I used ur link for purchase
No problem to use the stove top👍
Is the number for the igniter on the part?
It a great video will try to fix it myself, looks easy, Thanx.
Replaced igniter with a new one still doesn't glow... stove top and broiler work great is just the bake igniter that doesn't glow when turned on you can hear the click when oven turns on do you know what could possibly be wrong??
Good job Bianca,
Might be good to recheck your wire connections👍
Try smacking the upper console when the oven is supposed to light.
It might jar the relay and send power to the igniter👍
@@ScottTheFixItGuyChannel ok will give it a try thank you
@@ScottTheFixItGuyChannel This was the best advice ever. I literally smacked my display on startup and it worked! 😅 thank you 🙏
My oven won’t heat up but I can hear the click when the preheat light comes on…Any idea what it could be? Great video BTW!
Hey Waylon, just need a new igniter👍
I have this problem with the oven but the broiler still works. Does the broiler have a separate igniter? Thanks.
I changed my igniter… and still no action. When I hit the bake option I could hear the initial relay but have not seen any changes. What could be the next item to check on ?
Hi Ruben,
Can you send me a picture of the new igniter and how you wired it to:
Scottthefixitguy@yahoo.com
Thanks
Welcome😊
I replaced my igniter but it still won't glow, what could the problem be??
Thanks! This really saved me.
You’re welcome👍😊
It worked. Thank you
Thanks Bob👍😊
Hi..thanks..the ignitor is lighting but the gas is not flowing
A new igniter will fix it and let the gas flow👍
Thank you!
You’re welcome Leslie😊
My oven came with my house. I have a Frigidaire gas oven Electrolux. How do I make sure I’m getting the right ignighter? I don’t have the manual. It is the box shaped one
Great Question Michael👍 Click Here to Get Live Expert Help From Me For Just $5.00: ua-cam.com/channels/7fBqy8806u1r0NpPv_fQ2w.htmljoin
I had one of these ovens. The igniter died about 4 years after. The replacements only lasted about two years so I tossed it and got a regular oven.
Thanks for the upload! I have a question My oven stopped working and I replaced the temperature sensor. It's working again but it take abt 2mns for the flame to fire up.Before I could gear it light up within seconds. Should I return temperature sensor and just replace ignitor? The other issue I was having is a error 31 when I use stove top and oven at same time. I hear the click when I turn the oven on but it takes way longer to fireup.The model # is Lfgf3052tfa.
I would replace the igniter👍
I am having this issue with mine but i can see the ignitor glowing below the oven. Does it not have to be completely out to still be faulty or not strong enough to light it?
Hi Matthew,
Very often an igniter will glow but is too warm out to let gas flow.
A new igniter will fix it👍
@@ScottTheFixItGuyChannel thank you so much! Your reply is God's timing cause I'm literally inside my oven messing with this thing right now and was unsure but you're giving me confidence!
Great video but why didn’t you remove the door?
You can work around the door👍
My oven will not light the same time when I turn the gas knob on and push it in there is no click click click sound and it will not ignite by hand
Great Question Danny👍 Click Here to Get Live Expert Help From Me For Just $5.00: ua-cam.com/channels/7fBqy8806u1r0NpPv_fQ2w.htmljoin
How do you know that the igniter is bad if the igniter's heating elements are not roken, melted with the gap on them ?
If they glow but never light the oven, you should replace them 👍
Excellent video very good.
Thanks so much Alan👍
.your welcome, 😉👍
Really appreciate that Alan, I Hope That You Can Become A Member of Our Channel😊👍
Here’s a Membership Link: ua-cam.com/channels/7fBqy8806u1r0NpPv_fQ2w.htmljoin
Hi, my oven has flame but doesn't heat up. Is there something else it could be or still the igniter?
It can still be the igniter.
Awesome video bro!! A lot of help , thankyou!👍
Thanks so much Joe😊😊😊
In my oven, I see the glow from the igniter. Could it be the gas valve?
It’s very common for an old igniter to glow but not allow the gas to flow in.
Replacing the igniter with a new one will fix it 😊 I hope you can also subscribe to our channel with this link: ▶️-Subscribe Here: ua-cam.com/channels/7fBqy8806u1r0NpPv_fQ2w.html😊😊😊
@@ScottTheFixItGuyChannel so what's the best way to distinguish if it's the igniter or the valve that lets the gas flow in? Other than using the meter to test the ohms in both to broil and bake function?
I have a frigidaire range oven for more than 12 years. but I do not use it every day. I have baked my turkey only twice in so many years because the oven baking part is not working anymore.
What is wrong with it. And how much it cost to fix the baking part?
Just need to replace the 25.00 bake igniter. It’s pretty easy 👍
My igniter works fine. Just doesn’t ever heat. Gas never comes on. Broiler works fine
Time for a new bake igniter.
Even though it glows, it isn’t getting hot enough to let in the gas.
I have the same oven. My oven would cut off after baking for 10 minutes or so. Now the digital display doesnt even light up. I can still cook on the stove top. But the over doesnt even display to even turn on now?
Do u have to turn off the gas as well?
No you do not.
Hey Scott , Wat do you think the issue can be if my oven only ignites at 500 when I try to bake something , had it intermittently turn off by itself as well.?
I have an additional black shelf/tray beneath my heat deflector preventing me from accessing the wire connector/splice area of the igniter. This lower black (painted) shelf doesn't appear to come off. I have no access to screws.
Any suggestions?
Can you send me a video of that?
Scottthefixitguy@yahoo.com
@@ScottTheFixItGuyChannel Thank you for the quick reply. My son & I just finished swapping the ignitor and it worked like a charm...
Since I have an older model I had to access the ignitor and pick my splice location by pulling out the heavy drawer beneath...
Sometimes, the answer is right under your nose (or stove in this case.)
Thanks again!
this is a couple days, when I turn my oven on, the electricity key get down and disconnected, but doesn't do the same thing when I just turn on the stove, I didn't know what is the problem.
Sounds like the wire that goes to the oven igniter is touching metal and causing a short circuit. See if you can find where the wire’s insulation has rubbed off.
Help!!!! It’s Thanksgiving and my oven just smells like gas!!!! Can I ignite manually? Do I have to cut up my Turkey and cook it in the air fryer!!!??? 😢😢😢
Just needs a new igniter.
Make sure the igniter is installed right up against the burner tube👍
Please don’t light with a match. VERY DANGEROUS 😬
Helllllppp!!! I replaced my igniter but my oven still does not bake. The stovetop and broiler work. What now???
It must be the controller that sends power to the igniter.
I am so very grateful that you responded. Thank you so much. So now I have a follow-up question.
If it is the control does that mean it is not getting power because when I attached the new igniter, it sparked slightly. A handyman friend said it might be the valve. What are your thoughts?
Replaced ignitor no glow, what could it be
Just need a new controller 👍
I liked, good explanation.
I replaced the heating element but now the flames are too high. Do you know how to adjust or fix this
I have a bright glow without the oven igniting. What's wrong?
Hi Jessie ,
Even with a bright glow it can be the igniter.
The bake and broil buttons aren't working, but it comes on to self clean. I just got this stove months ago and like it a lot. Need to know how to fix it. Is there a reset button on it or what is wrong?
Hi Peggy Sue,
Can you send me a video of what happens with the display when you set it for bake or for broil?
My email is Scottthefixitguy@ yahoo.com
Great info👍
Thanks so much😊
If it does not heat up or get warm on BAKE. Will it still turn on and heat up on BROIL? This is the problem I am having... does that mean it's my igniter???
Hi Jesus, 80% chance it’s your igniter👍
easy. quick.
Thank you😊
Would broiler igniter be the same type of igniter?
I believe it’s the same😊
My igniter heats up but the flame wont start, is there a thermal couple?
It’s a weak igniter. A new one will fix it👍
Thank you
Nice& explicit.thanks
My igniter is working but gas its escaping how can I fix that
Can you send that same question to my email at: scottthefixitguy@yahoo.com
@@ScottTheFixItGuyChannel I emailed you thx
Hey did you think about what the problem is with my stove, can it be fixed
Isn’t there a plug you can undo instead of stripping the wires?
Yep,
The igniters with the plug just cost more.
My stove comes on but after a few minutes its turn off ..pilot' turn on and off ..what should i do??
Time for a new igniter👍
Did anyone happen to get the part number? I tried several times and it went by so quickly and was unable to read it.
Hi Scott,
Here’s the part: www.amazon.com/Supplying-Demand-5303935066-AP2150412-5303207520/dp/B07QQG4GKR/ref=sxts_rp_s_a_1_0?content-id=amzn1.sym.9cb06d61-cbae-4109-9d1e-14578fae3d41%3Aamzn1.sym.9cb06d61-cbae-4109-9d1e-14578fae3d41&crid=2MGJVPMEFOIRB&cv_ct_cx=frigidaire+oven+igniter&keywords=frigidaire+oven+igniter&pd_rd_i=B07QQG4GKR&pd_rd_r=0b4f0280-cd7b-45c5-a597-29f7a2885eba&pd_rd_w=5M4zG&pd_rd_wg=VhdWg&pf_rd_p=9cb06d61-cbae-4109-9d1e-14578fae3d41&pf_rd_r=8BQGNWWG2A3N3DMZTW70&psc=1&qid=1658112480&sprefix=frigidaire+oven%2Caps%2C1719&sr=1-1-ea136695-3596-4534-80e7-1570345d02b9
My Frigidaire oven igniter glows but doesn’t make any gas hissing and so no flame😖This rental was always occupied by Vietnamese who never used it!
Usually means it’s time for a new igniter.
So when I turn on the oven I can see the orange glow through the slots which I believe means the igniter is working, but the oven is still not heating up, what could it be?
Great question.
Bad igniters will still glow but they won’t allow the gas to come in. A new igniter will make it work😊👍
@@ScottTheFixItGuyChannel yes! You are exactly right! That's precisely what it was
Don't glow and replaced the ignitor
That means the bake relay located on the control board in the upper consul, needs to be replaced because it is not sending power to the safety valve and igniter.
What is the part number
I just replaced mine and my oven still won't heat what else could cause
Next step is to replace the clock/controller
Thx for this
Your welcome👍
Thank man!!! Really helped a lot.
Igniter works but gas ain’t coming out on my stove
Even though the igniter glows, it won’t let gas come in if it’s wearing out, a new igniter will fix it👍
@@ScottTheFixItGuyChannel so it’s not the valve. Since I saw it glowing really bright I was thinking on changing the valve instead. How do I recognize what’s really damaged?
It’s super common for a bright glow but no gas.
The new igniter solves it.
The igniters are cheap and easy to replace.
I’m assuming that there is gas lighting the surface burners.
The bake won’t work?
My oven won’t light
I think you need a new igniter 😊
I can’t see the wires you attached
Or just unplug it?
It’s best to do both.
Are we going to pretend like there's not a water heater in the kitchen?
That can’t be up to code🤪😬
I take it you don't have to cut the power to put those wires back together 😆
Eight years? aaahahahahaha My 9 year old Frigidaire gallery has burned up three already - number four going in. OEM parts!! $120 each - the $30 jobs won't fit because they changed the houseing mounting tabs. Do not buy a Gallery - you pay more to get hosed better.
I feel like that’s the problem I’m having. The “universal” one I ordered off Amazon for $40 looks a lot different than the one I just took outta my stove.
You can bend the metal housing of the old one and fit in the new ceramic igniter and then bend the metal case in on the new igniter.
@@ScottTheFixItGuyChannel Ya, I saved the old OEM so i can yank the old ceramic igniter out and re-use the old housing. Thanks Scott.
“Easy fix” lol
LoL
Im like in who's world ?
In every world, what exactly is difficult or even too time consuming about this fix?
This video is worthless. How do you even know if that's the problem? You showed no troubleshooting you just threw a part at it and hoped that fixed the issue.
98% of the time it’s the igniter.
2% it’s a bad relay on the control board.
Start with the obvious and cheapest👍