@@choppaextended2487 i thought VQs were fragile and building wasn't ever worth it cause no matter what they would blow up regardless Q_Q I didn't think it was possible for a VQ to get anything over 800whp
@@omnipotentgaming166 stock vq internals are good for max like 380-400 tq. you can push 450 hp if you lower the torque. high torque on stock interals will bend the rods. if you build internal or put 370z internals you can make almost double the torque
@@qualydinero7451 I’m dead serious, the guy I bought it off of built the entire motor, had a supercharger set up on it then swapped out the blower for a turbonetics kit and decided to sell it for 6k, I took advantage and jumped on it real quick, the only thing I have to do to it is connect the exhaust because it needs a reverse y pipe, install the new 650cc injectors and bigger intercooler he threw in so I can turn up the boost
False. The gasket/headstuds still can pop and get headlift. You have to do the fire hoops, which only soho and Maxworx do from what I know unless you find a shop that’ll do it for you.
@@JuanRodriguez-uh4hra built de good for 600 is like $4k in parts on a low mile engine. This dude likely has about 12-20k in that DE, not to include labor.
I'm still surprised most z guys aren't using Jim wolf cams. For the vq. They already doing pistons so why not go with big boy c9 292 exhaust and c10 310 intake. There are a few 400hp + all motor ones running around that way. And idle like a cammed v8. Check out Michael Gardner for reference.
I wanna see a vid on the red subie at around 8:20 not many Hawkeyes at the drag, love my 06 wrx as a quick canyon/backroad car, interesting to see it dragging😁
Is that Tomei dahhh!? Kiicks needs to get in contact the 350z dude. His intake, piping, and everything under the hood was done super clean and it performs 💪 Edit: All those builds were top notch🤌
Hell ya keeping the original vq! Love it cant wait to put 600 plus in my awd i love the infiniti body 4doors being diff and original at the same time wicked 350z!
Wow here I am thinking anything 11 second and 10 second is scary and too much for the treet...and nowadays those are boomer numbers with these 9 second cars....unbelievable and impressive
This is just modern day “muscle car guy” era with tuners lol ppl daily’d 8 sec muscle cars all the time when I was growing up now to see Nissans hondas shit even vdubs doing this is just pure bliss 🥹😂
@@blakelip3 yes Nisformance is great with FWD maxima motors….I live 15 minutes from the shop and they’re always putting out some fast cars….I just haven’t seen any fast RWD cars except for their shop Z DE which uses a 2013 DE maxima motor and has the 1/4 NA record…they just gotta get the RWD stuff figured out for customers
@@1of1damani11 is the 3.0 what use to come in the old 300's? I haven't seen anyone make a lot of power on a vq not reliaby, I think 700 is about their limits even boosted
@@1-Six-dee vq37 can go about 650-700 reliable before head lift, vq35de 400-450 Before that bitch go kaboom, vq35hr I’ve seen 550 highest last for awhile but not long Vqs even built have the infamous headlift issue on them 700+
Tons of differences. There are 2 VG30s too. One SOHC and one DOHC. The SOHC has seen several 600+ on stock internals. Mine made 545 on stock 8 years ago still going strong. The DOHC VG typically can make more on stock as the rods are stronger and the oil pump is better for higher RPM.
You wanted to be different ...By keeping original engine? Obv built-up HARD And man what A Car!!! Where's His Shop? If anyone knows...Im putting a BRAND new Bridgeported BOOSTED MONSTER , IN my 88 10th anniversary RX-7 1 of 1500 ! 2nd owner ! I've had it 24 YEARS and im gonna need some fabrication for the Gate to Downpipe... IM Disabled And may possibly need some other work done...like AN Lines, mostly I need an ECU .. I've had all the money ready to go ..but I past out at work ,And my life Changed for ever and I stopped breathing (3xSaved) then a 15 hour surgery removing 6 of my organs.. (TPAIT) I'd appreciate any info please...Keep this sport ALIVE these are FAST Fuggen cars WOW PEACE ✌🏾
The natural raspiness of the DE mixed with wind sounds of the turbo sounds so good! Props for sticking with the V6 and not LS or 2J swapping it
What a real car enthusiast would do😈💨🎺
I’m a simple man I see high hp Nissans I click 😊
Plus! real men drive H pattern... 😎
@@snakes5506 I’m one of them😎
Nissan Altima has entered the chat 💬
Same.
I can co-sign this statement
Those VQs have a unique sound! Coll to see a 1000 hp VQ
Yeah people Always forget they are capable of making big power
@@choppaextended2487 i thought VQs were fragile and building wasn't ever worth it cause no matter what they would blow up regardless Q_Q I didn't think it was possible for a VQ to get anything over 800whp
@@omnipotentgaming166 stock vq internals are good for max like 380-400 tq. you can push 450 hp if you lower the torque. high torque on stock interals will bend the rods. if you build internal or put 370z internals you can make almost double the torque
Mad props to Dean. That Z is getting faster every time we see it. Z32s are so underrated and he’s proving it. Great job as always, TRC.
What’s his page
Sheeshhh I’ve actually never seen someone do this much work on a DE props to this man for being different!!🙌🙌
there's better ones than this one. check out the record holders all de too
Vinny ten made 1800 on a DE ran 6.5 at 215 back in 2005. It's a great platform, with many mew things going out this year from NY
I just bought a fully built single turbo 350z de for 6k
@@petrolhead8851 yeah maybe in need for speed 😅
@@qualydinero7451 I’m dead serious, the guy I bought it off of built the entire motor, had a supercharger set up on it then swapped out the blower for a turbonetics kit and decided to sell it for 6k, I took advantage and jumped on it real quick, the only thing I have to do to it is connect the exhaust because it needs a reverse y pipe, install the new 650cc injectors and bigger intercooler he threw in so I can turn up the boost
If you go closed deck with the right head stud/gasket combo on these VQs it solves the head lift issue for all those saying headlift
False. The gasket/headstuds still can pop and get headlift. You have to do the fire hoops, which only soho and Maxworx do from what I know unless you find a shop that’ll do it for you.
@@EatMyPropwash UniqueMotorsports can do it too. They made some VQs get 1000hp with Open Deck blocks
@@EatMyPropwash you can with a shit tune and bad machine work. Lots of open deck blocks kicking on studs and oem gaskets at 900whp.
that 350z is fire, mad props for keeping it original
The VQ is the best part of the car
love the tone of that VQ, it sounds amazing
I know right. It doesn’t sound like the typical trumpet.
Appreciate you taking the time to film us! 240sx only going to get faster!
Sweet car brother! Giving inspiration to all the other 240sx owners.
damn DE putting in work!
Hell yeah love to see these cars get some attention 💪🏻💪🏻
Finally a 240sx video....needed a little inspiration
Kyle is a solid dude,, congrats bud 👏
You guys did Nissan's Justice on this one very well put together. Did a little bit of everything for everyone of course the LS swap.
Hell yeah Kyle! Happy to see how well you've done and far you've come man! Hope to see the supra on here next!
Why do ppl complain VQ’s can’t make power??? 😅 that Z is wild!!!!!
It takes a shit ton of money with a VQ to make power with relative reliability
@@M_A_R_I_N_E785 I thought VQs were super cheap to modify?Aren’t forged externals only like 1000$
@@JuanRodriguez-uh4hra built de good for 600 is like $4k in parts on a low mile engine. This dude likely has about 12-20k in that DE, not to include labor.
@@VZBudgetBuildzaverage amount of money to make a 1khp what r u yapping about any motor can make power built
Let’s goooooo Kyle TdiPerformance 🔥🔥🔥🔥🔥🔥🔥
Vqs always have a nice sound to them.
1000 on a vq motor is complete insanity.
Pretty common on a VQ37VHR but pretty rare to see a build DE that’s a Real car guy right there
That s13 was garage built. He lived down the street from my buddy. Always cool to see cars u have seen in person.
Yessir!!!
Kyle is a badass, he built my car and I have much love and respect for that man 🫶🏼👍
That S13 is badass!!🇺🇸🇺🇸🇺🇸💪💪💪
It’s an S14
@@RadDadisRad the last car was CLEARLY an s13
@@clutchkickpj693 yeah I know that one is. I didn’t watch that far. I was thinking he was talking about the 2J S14 that was in the clips at 0:38
@@clutchkickpj693 Yessir! Ours!
Happy Jon rogers made his 240 manual Again ❤ #SaveTheManuals
TRC videos never disappoint
Sees Z + VQ *clicks instantly*
That Z32 is bad ass!
I'm still surprised most z guys aren't using Jim wolf cams. For the vq. They already doing pistons so why not go with big boy c9 292 exhaust and c10 310 intake. There are a few 400hp + all motor ones running around that way. And idle like a cammed v8. Check out Michael Gardner for reference.
1000 hp Z is my dream car 🔥🔥
That’s a low goal.
@@RadDadisRad You don't 1500 hp in a Z to be crazy fast if this Z had a dct or well setup automatic transmission it'd be an 8 sec car
@@boosted_brody5474 yeah good luck going 8s with this chassis
@@Yawngodd they have done 8s and record holders did 6s
@@emanuelc.7051 link it I’ll wait
VQ6 trumpets for the win
That H pattern 240SX doesn’t make sense at all… that launch on that small ass tire??? Hallelujah amen brother
This is such an amazing channel!
8:57 Mustang fails and the 2JZ Supra Saiyan engine lives!
I love my de it’s loyal asf
Freshhkiicks like 👀
I wanna see a vid on the red subie at around 8:20 not many Hawkeyes at the drag, love my 06 wrx as a quick canyon/backroad car, interesting to see it dragging😁
ua-cam.com/video/oqofczo24NQ/v-deo.html TRC's video on it
@@rahulisgay3689 what a g 🙏🙏🙏
I like fast cars!
8:07 when you run out of gears in 7 seconds 😂😂
Is that Tomei dahhh!?
Kiicks needs to get in contact the 350z dude. His intake, piping, and everything under the hood was done super clean and it performs 💪
Edit: All those builds were top notch🤌
East coast VQs>West coast VQs all day baby!!!
@@n55Rob it’ll always be like that, all the top vq engineers and tuners live in the east.
@@KiingTx facts and the west coast boys wanna talk shit when they don’t even get 93 and good E(depending on where) lol
1005hp on Vq35 on 29psi impressive
The s13 guy SAID around 1100hp to 1200hp. Seems like honda has the best blue print On a K24. A 4 banger won
Yes it is, This was qualifying, don't have to leave at the light.
Damm now I wanna keep my Z 😂
Stock crank on that 2j ? That's insane.
A 2jz went 331mph+ on stock crank and lived most it's life at 8500rpm ...now that's insane but yeah the setup in that 240sx is nice.m
This car leaves nothing but hurt feelings
Awesome! Hi, i from argentina🇦🇷☝🏼😎
A DE, I’m loving it
Ohh shyt you'll switched it up.💪🏾🔥🔥🔥🔥
I really enjoyed this video 🥰
Hell ya keeping the original vq! Love it cant wait to put 600 plus in my awd i love the infiniti body 4doors being diff and original at the same time wicked 350z!
This Z sounds exactly like Hal's black 9.3s Z.
AWESOME VIDEO ! ! ! ! ! I LOVE IT ! ! ! ! ! ! !
Wow here I am thinking anything 11 second and 10 second is scary and too much for the treet...and nowadays those are boomer numbers with these 9 second cars....unbelievable and impressive
This is just modern day “muscle car guy” era with tuners lol ppl daily’d 8 sec muscle cars all the time when I was growing up now to see Nissans hondas shit even vdubs doing this is just pure bliss 🥹😂
You guys have to do a video on nitish21 g35 😊
All the Nissans and not a single GTR 🤘
Very nice Z!!!!!
Nissan Altima still is king
It sounds so good
Japanese make some the meanest V6 engines.
I was gonna say man his first run in the Nissan was terrible. Afterwards he kept getting better but he still ain't PUSHIN it.
So I’m currently on a mission to build my DE
Seen Cooper B. at the beginning of the video, lol... we no tht stance...😉😅
Sleeping on the light every pass
I'm in Orlando and I'm looking for a Good tunner for my 350z
Martin from RSnthalpy is a good Nissan tuner….also you can get a remote tune from ray at RZG or Admintuning
@@n55Rob thanks you bro I'm a hit em up
Rsenthalpy. most reputable and experienced Nissan/Infiniti Tuner.
@@n55Rob replace admin with Nisformance Darren Surratt out of NC
@@blakelip3 yes Nisformance is great with FWD maxima motors….I live 15 minutes from the shop and they’re always putting out some fast cars….I just haven’t seen any fast RWD cars except for their shop Z DE which uses a 2013 DE maxima motor and has the 1/4 NA record…they just gotta get the RWD stuff figured out for customers
DE❤
He needs the dct from the f10 m5 man it will help so much
Nice rides
What's the wheel tire combo on the 350z
What kind of rear end is that on the 350z?
Pense en hacer swap al zeta pero despues de este video no. Arriba VQ
What's the difference between the vq and the vg?
wikipedia.org/wiki/Nissan_VG_engine
wikipedia.org/wiki/Nissan_VQ_engine
As far as I know there is nothing shared between the two engines.
Older 3.0 liter pain in the ass to work on v6 vg . And 3.5L v6 trombone marching band vq
@@1of1damani11 is the 3.0 what use to come in the old 300's? I haven't seen anyone make a lot of power on a vq not reliaby, I think 700 is about their limits even boosted
@@1-Six-dee vq37 can go about 650-700 reliable before head lift, vq35de 400-450
Before that bitch go kaboom, vq35hr I’ve seen 550 highest last for awhile but not long
Vqs even built have the infamous headlift issue on them 700+
Tons of differences. There are 2 VG30s too. One SOHC and one DOHC. The SOHC has seen several 600+ on stock internals. Mine made 545 on stock 8 years ago still going strong. The DOHC VG typically can make more on stock as the rods are stronger and the oil pump is better for higher RPM.
Can you please find a BC stroker VQ motor to do a review/breakdown of! I want to do a g37x stroker build really bad👌🏽
What's with the 350z's reaction time?
Why didnt he get carbon fiber doors and hatch? They would help shave off weight because they are heavy af
Is it me or does the suspension on the 350z look a little soft.
Is that a Tomei dahhh?
With my experience, VQ can only go SO high. Swap to VR engine, like a 3.5 and your ceiling will match your wallet!
Go dean .
Nissan day
Mph on that z seems low for 1kwhp
You wanted to be different ...By keeping original engine? Obv built-up HARD And man what A Car!!!
Where's His Shop? If anyone knows...Im putting a BRAND new Bridgeported BOOSTED MONSTER , IN my 88 10th anniversary RX-7
1 of 1500 ! 2nd owner ! I've had it 24 YEARS and im gonna need some fabrication for the Gate to Downpipe... IM Disabled And may possibly need some other work done...like AN Lines, mostly I need an ECU .. I've had all the money ready to go ..but I past out at work ,And my life Changed for ever and I stopped breathing (3xSaved) then a 15 hour surgery removing 6 of my organs.. (TPAIT)
I'd appreciate any info please...Keep this sport ALIVE these are FAST Fuggen cars WOW
PEACE ✌🏾
Gotta get freshhkiicks turbo nismo 350z on this channel 💪🏻
Not on this nissan's level my man
That doesn't compete with this car. This is a track proven car.
These cars are echelons above Corey's Nismo. True race cars vs street car, hard to make a comparison.
Kicks piston/rod motor doesn’t even touch this VQ
big facts. streetcar compared to track car though. 800whp vs 1000whp.
Crazy build 🔥can’t wait till the G is at this level go drop a sub if y’all wanna see the journey 🙌🏾 1000 wheel on a de is crazy
My guy needs a bit of damper tuning!
😂 wouldn’t mind keeping up with the 350Z on instagram or something. Anyone know his handle?
It’s actually his wife’s car lol
thats a de right
😎
350z lauches give me anxiety
Lee Kimberly Martinez Deborah Rodriguez Deborah
Anderson Daniel Davis Maria Gonzalez Gary
Miller Thomas Williams Matthew Garcia Michael
Lopez Thomas Garcia Gary Robinson Jeffrey
Jackson Larry Hernandez Richard Hall Cynthia
In
I'm a pulsar dealer If anyone needs a deal on a turbo
Wilson Steven Wilson Jeffrey Thomas Jose
Robinson Christopher Brown William Davis Amy
Didnt even know de motors could last like that
I feel that 50z would of been faster with a proper launch 😞 shit saddens me
Once again...F JZ.
I’ll be the one to say it… Nissans that aren’t from the 90s are junk