That Full Immunity is a hard sell at that price. You can get a Wharnecliffe Hogue Deka in Magnacut much cheaper. You can even upgrade the scales on the Hogue Deka and still be cheaper than the Full Immunity.
M4 is awesome and BM does a good heat treat . I really like a few BM designs too , they’re amongst my edc lineup . I agree they’re more than twice the price they should be . Still , I like benchmade knives like we all do l, wtf tho. Microtech is another overhyped brand . So over rated imho . They make them so there is just enough demand and charge triple . Not buying them either but the clones aren’t half bad in all honesty , the $40 cF bm clone on dhgate is spot in for a scale swap . 👍
@@gtrfreak oh someone will give you a a better answer than I can very soon for sure . Going to get some popcorn ..😂. Gotta love nerding out on steel . Honestly you’re good with either , they’re “ supersteels “
I have 2 Claymores now. One is a ranger green drop point with serrations and the other is a black handle tanto blade with serrations, both full size. They are amazing! The tanto was new and the drop point was used. I sent the used one in as it was pretty dull and they sharpened it so sharp, I've cut myself 4 times with it and the first time I opened it, I went to close it and it slipped and literally fileted my finger. It's my second sharpest knife after my Buck 110 auto which is easily sharper than a razor and the sharpest thing I've ever seen ever. I LOVE the grivory. I thought it would be a cheap plastic. However, I have dropped the drop point once 3 ft up onto concrete and someone I let see it dropped it from about 4 ft up and it hit concrete and my tanto I dropped from about 4 ft onto hard asphalt and there isn't a single mark on either of them! No scratch, no chip no mark at ALL! I would NOT recommend trying it lol, but if it happens it may very well hold up perfectly fine. Now I love the model so much, I want a mini, I also want another full size tanto with the straight edge AND a mini out the front. I would think that the aluminum would scratch more easily than the grivory. I have no proof of that, just my thoughts on it. I have a Presidio II auto with the aluminum and I won't carry it in the pocket with my keys and brass knuckles and so on because I'm afraid of it scratching as it cost over 400 bucks with tax and shipping.
I believe cpm d2 is actually an older steel and its basically just the powder steel verion of d2 so it has a finer grain structure which should make it more stable. Its supposed to be better than your foreign made ignot d2.
Hey, I was wondering have you ever heard of this knife is it any good? Does anyone know where I can get? A leather are Kydex sheath made for this Gerber Stowe Fixed Blade Knife Black Micarta (2.5" Stone Wash)
What’s a couple hundred dollars for a knife. For $300 more you could get a polymer 9mm. The knife is more pleasant to show off to friends too…or the wad of 100 bills. Ok, I like it.
I’ve considered a Claymore (full sized) before, but the size to price ratio to that Immunity is just not worth it to me. I understand why it’s pricey with the warranty and USA construction, but for what it is I just know it’s not worth it to me.
If you guys can get this video to 1,000 likes 👍🏻 I will post 3 videos a week for the next few weeks 🙏🏼
That Full Immunity is a hard sell at that price. You can get a Wharnecliffe Hogue Deka in Magnacut much cheaper. You can even upgrade the scales on the Hogue Deka and still be cheaper than the Full Immunity.
This. I'm 200 into magnacut one with og scales. Saw this and it had my interest until I saw near 300
M4 is awesome and BM does a good heat treat . I really like a few BM designs too , they’re amongst my edc lineup . I agree they’re more than twice the price they should be . Still , I like benchmade knives like we all do l, wtf tho. Microtech is another overhyped brand . So over rated imho . They make them so there is just enough demand and charge triple . Not buying them either but the clones aren’t half bad in all honesty , the $40 cF bm clone on dhgate is spot in for a scale swap . 👍
You’re exactly right, but the selling point for the Full Immunity is that it’s useful in areas of the US with more restrictive knife regulations.
Is Magnacut better than M4 or similar
@@gtrfreak oh someone will give you a a better answer than I can very soon for sure . Going to get some popcorn ..😂. Gotta love nerding out on steel . Honestly you’re good with either , they’re “ supersteels “
I have 2 Claymores now. One is a ranger green drop point with serrations and the other is a black handle tanto blade with serrations, both full size. They are amazing! The tanto was new and the drop point was used. I sent the used one in as it was pretty dull and they sharpened it so sharp, I've cut myself 4 times with it and the first time I opened it, I went to close it and it slipped and literally fileted my finger. It's my second sharpest knife after my Buck 110 auto which is easily sharper than a razor and the sharpest thing I've ever seen ever. I LOVE the grivory. I thought it would be a cheap plastic. However, I have dropped the drop point once 3 ft up onto concrete and someone I let see it dropped it from about 4 ft up and it hit concrete and my tanto I dropped from about 4 ft onto hard asphalt and there isn't a single mark on either of them! No scratch, no chip no mark at ALL! I would NOT recommend trying it lol, but if it happens it may very well hold up perfectly fine. Now I love the model so much, I want a mini, I also want another full size tanto with the straight edge AND a mini out the front. I would think that the aluminum would scratch more easily than the grivory. I have no proof of that, just my thoughts on it. I have a Presidio II auto with the aluminum and I won't carry it in the pocket with my keys and brass knuckles and so on because I'm afraid of it scratching as it cost over 400 bucks with tax and shipping.
Benchmade is the Alienware of the knife world.
I would say more like Razer because your overpaying for a great product... I don't think I can say the same for the Dell owned Alienware...
More like the nike of the knife world, spyderco I would say is more alienware because their heat treatment is s tier
Lol, "don't live in California, don't want to!" Love it
I absolutely love the full immunity. It’s my EDC.
The mini bugout is still one of my favorites the mini claymore seems nice
Couple places selling a charcoal gray immunity. Just ordered mine in auto. Wanted something fun i could carry all the places I go for work
I believe cpm d2 is actually an older steel and its basically just the powder steel verion of d2 so it has a finer grain structure which should make it more stable. Its supposed to be better than your foreign made ignot d2.
Thanks for letting us know you don’t wanna live in California 😂
Any time ✌🏻
Why does benchmade put a deep carry pocket clip but the knives still show some scales almost 1/4 on some. Maybe you can answer that question. Thanks
I have a mini claymore and absolutely love it
Claymore reminds me of the BM AFO auto
That immunity looks nice . I. Can’t wait for that .
The Benchmade Immunity reminds me of the Fox Knives Kea. I dig the little knife. Thanks for the overview on the New Pocket Steel Bro!
Hey, I was wondering have you ever heard of this knife is it any good? Does anyone know where I can get? A leather are Kydex sheath made for this Gerber Stowe Fixed Blade Knife Black Micarta (2.5" Stone Wash)
Good to see you back bro
nice i was eyeing the immunity
My bailout is my favorite knife, I plan on getting the immunity just because it has the same scales.
Will you be doing a portable power stations via battery/solar?
Ryan please make the ignite I want one
I would Definitely pick the mini Claymore
Need a manual claymore!
mini claymore all day
I ordered 2 Full Immunity knives a couple of weeks ago but the knife seller is dragging their feet - no shipment yet.
What’s a couple hundred dollars for a knife. For $300 more you could get a polymer 9mm. The knife is more pleasant to show off to friends too…or the wad of 100 bills. Ok, I like it.
Quality knives are worth it. Excluding Benchmade. They’re way overpriced
I’ve considered a Claymore (full sized) before, but the size to price ratio to that Immunity is just not worth it to me. I understand why it’s pricey with the warranty and USA construction, but for what it is I just know it’s not worth it to me.
My EDC is a small Smith& Wesson knife. 🤷♂️
I find the hype and over priced Benchmade they do select good steel's but then they slap on plastic scales makes no sense
Keep going. Also, love the new ride.
Lovethe channel, hate benchmade.
All that just to terminate for driving through a parking lot?
$200 for a Grivory CPM D2 Auto?
$270 for a mini Wharncliffe Bailout?
Yeah, Benchmade is out of touch with the market.
BENCHMADE=overpriced average knives. The claymore is an overpriced Boker Kalashnikov with a butterfly on it.
So when will you be reviewing knives for men?