Thanks brother. You made the perfect video for the exact model. The same steps worked for the LiftMaster 365LM universal radio control I just installed aswell. 👍🏻
Actually, you hold the bottom button down until it remains solid (up to 20 secs). Then you hit the learn button 1x THEN you hit the button you want to program 2 times and wait (up to 30 secs) for the gate/door to open. Once the gate/door opens you then you hit any button. I hope this helps someone looking for information on hos to program the Liftmaster 374ut
@stoned_kapre no idea... could it be the battery? I couldn't find anything on that. You should probably contact Chamberlain directly about it. Sorry I couldn't answer your question.
I Followed those steps and it worked up until the garage goes up than I pressed the button I want twice but garage still goes up it doesn’t seem to program that part
Press for the steady LED light, press learn button on door opener, press twice the remote button you want to program and wait for the door to open. When door is opening press any button to finish the programming.
I’m actually having that same issue as well on that part where the garage door goes up and I pressed the button to exit programming but it doesn’t seem to do what it suppose to do
@@davidc8462 I contacted the technical support of Chamberlain, the staff asked me to do programming with the remote wall unit (hit the learn button twice) instead of the overhead control box. Viola...it works.
Watched 6 different videos, this one actually worked thank you
Allrigth! Thank you!
This one worked!! So many different tutorials on this, crazy!
Indeed! "This one worked!!". That's satisfying to read.
Very helpful. Your video helped me program mine with the Quantum 3214 (Wayne Dalton) garage opener. It worked right away. Thanks man!
Awesome!
Thanks brother. You made the perfect video for the exact model. The same steps worked for the LiftMaster 365LM universal radio control I just installed aswell. 👍🏻
Awesome!
This is the best video, all of the other videos I watch were too long and they didn’t work. Good job getting straight to the point friend!
Órale! Appreciate your comment.
Thank you for this very informative and easy-to-use video.
Very clear instructions. Thank you so much!
This is great vid !
Very clear and helpful. Thank you!
Actually, you hold the bottom button down until it remains solid (up to 20 secs). Then you hit the learn button 1x THEN you hit the button you want to program 2 times and wait (up to 30 secs) for the gate/door to open. Once the gate/door opens you then you hit any button. I hope this helps someone looking for information on hos to program the Liftmaster 374ut
Thank you for this video. So helpful.
Awesome!
Helped me better than manual and I got it programed, thanks!
I love you Man!!! PERFECT!!!!!
Thank you man very helpful
Thank you. It was so confusing from the manual
No problem!
Thank you this helped👍
Alright!
Thank you!
Allright!
Thank you mate. I lost the packaging and needed thia
No problem mate!
Thank u
🙏👍 muchas gracias senor
Órale!!!
😊
Thanks
No problem!
Thanks papi
@tphuynh85 no problem mijo....
Does anyone know how to reset one of these remotes without having to clear all the codes on the garage opener itself?
Thanks what is the model #
why is mine an orange led instead of a blue led? can’t even to get it set up
@stoned_kapre no idea... could it be the battery? I couldn't find anything on that. You should probably contact Chamberlain directly about it. Sorry I couldn't answer your question.
Thank you!!
No problem!
No problem!
Tengo ese control pero para codificarlo el problema es que el motor crafman no tiene botón ,lo que trae es codigo
No se si esto te peeda ser util.... ua-cam.com/video/yTeb1lCDztA/v-deo.htmlsi=jzna83plga3INLCr
Will this remote also operate security gates?
According to the instructions manual, it will. It is supposed to be compatible with most brands. Those brands are listed in the instructions manuals.
I Followed those steps and it worked up until the garage goes up than I pressed the button I want twice but garage still goes up it doesn’t seem to program that part
Press for the steady LED light, press learn button on door opener, press twice the remote button you want to program and wait for the door to open. When door is opening press any button to finish the programming.
I’m actually having that same issue as well on that part where the garage door goes up and I pressed the button to exit programming but it doesn’t seem to do what it suppose to do
Me tooo!!!
@@typhanie5279 did you guys ever figure it out. Looking to get one of these and need to know if I should or not
@@davidc8462 I contacted the technical support of Chamberlain, the staff asked me to do programming with the remote wall unit (hit the learn button twice) instead of the overhead control box. Viola...it works.