Great .. just what I needed to see. Before I throw our Presonus in the bin for being unreliable. I am a tech but it gives me a lot more confidence when I see how you pulled it apart. Thanks for sharing. I hope this mod fixes our issues. Also got a dead fader that I'll get to when inside.
I have the source equal to this damaged one, will you know what the value of Diode 19 is? Since this was busted and I can't find any diagram on the internet.
Hi, The 3 capacitors you showed @ 2:32 in the video, were damaged also? or they was ok but those capacitors were suffering due the low capacity of the old current regulator? Thanks for your help!!
the capacitor is sometimes damaged, the characteristics of the upper body enlarge as if it is about to explode. but if like other capacitors do not need to be replaced.
Thank you for you videos.Dou you know ,where is problem,my SL 16.4.2 GR fozen full scale ,and when i chek it ,next time my SL worck, some times ,and cracle and not work ,nothing...
Mine has all inputs and output meters responding but no audio from Main, phones or any output. The problem was heat related and intermittent but now all the time. Any ideas to help? I am an experienced engineer but can't get a schematic anywhere and I live in Brazil now...Help!
hi i think your trying to repair is the ADC board ( analog to Digital converter board) not DSP board. if the DSP board is faulty the result is hanged system. the GR is gated.. no input no output. and if the ADC board is faulty the result is some channel from 1 to 12 has no signal input output.
bang punya saya presonus 16.4.2 tidak bekerja mixernya hidup tapi hampir semua tombol lampunya menyala tapi di tekan tidak mau mati atau tidak ada respon.. bagian eq dan lain tidak bekerja.... bagian LCD tidak ada tulisan... minta solusinya bang.....
please replace the Firewire module Part Number 410-PG11394 For further consultation, please contact the distributor in your country, click on www.presonus.com/buy/international-distributors#OC
Apakah indikator LED GR menyala semua..?? kalau iya berarti yg rusak modul Firewire. kalau rusak DSP biasanya hanya beberapa channel saja yang tidak berfungsi.. kadang kadang beberapa channel berfungsi kadang mati.
www.presonus.com/buy/international-distributors#OC Indonesia PT. Panca Inti Bermitra Pergudangan Prima Center 1 F15 Jl. Pool PPD No.11 Pesing Poglar - Kedaung Kali Angke Cengkareng - Jakarta 11710 Phone: +62 21 2967 1425
Kumusta ka .. suriin ang output boltahe ng 6 volts SMPS (Power supply). at sa ilalim ng module ng LCD mayroong isang module ng kontrol, subukang palitan ang regulator sa control module ng IC 7805.
Thanks for this video, mine just died at a show, plop screen rebooted and then eveything went down and did not work. I just used it for 10 times in 3 years. I still have it but after seeing this i maybe look into it one day. I guess the pcb but weird that it rebooted and then died… EDIT: I found the problem R26 and D13 seem to be burned on the PCB, also R17 seems to have some blackend on one side, but this could be from D13. Anyone know how to get my hand o a new PCB, i think i can replace those components myself, but i don't like to work on a powerboard, because it hold chage. If someone can give me the value of those components for replacement i could ask a friend to help me. Or know a place in Europe ehere i can order the 400-PG2PWR (however i saw that there is a newer version 410-PG2PWR?) i would be very happy
Great .. just what I needed to see. Before I throw our Presonus in the bin for being unreliable. I am a tech but it gives me a lot more confidence when I see how you pulled it apart. Thanks for sharing. I hope this mod fixes our issues. Also got a dead fader that I'll get to when inside.
did you manage to repair your desk? i have a studiolive 16:4:2 and getting no sound out of it at all
I have the source equal to this damaged one, will you know what the value of Diode 19 is? Since this was busted and I can't find any diagram on the internet.
any idea where i can get faders for the 2442 ?
Hi, The 3 capacitors you showed @ 2:32 in the video, were damaged also? or they was ok but those capacitors were suffering due the low capacity of the old current regulator? Thanks for your help!!
the capacitor is sometimes damaged, the characteristics of the upper body enlarge as if it is about to explode. but if like other capacitors do not need to be replaced.
i got same SL24.4.2 AI mixer, one Aux sending and Main out R, doesnot work. Could you please advise me or workout for me? Thank You
Goodnight friend! Could you tell me the code for the new component? Thanks.
please replace the equation, IC 7805
Thank you for you videos.Dou you know ,where is problem,my SL 16.4.2 GR fozen full scale ,and when i chek it ,next time my SL worck, some times ,and cracle and not work ,nothing...
firewire module is broken, please see this video
ua-cam.com/video/naY0V8F-5wI/v-deo.html
What you have installed behind each ic 7805? I see something installed after you soldered each one.
Dissipadores de calor !
Where are u located at ?
kalo sering ngefrizz kemungkinan di bagian mana bang kerusakan?? apakah di bagian power suplay?
Pls i need power supply module for this presonus 24.4.2. Kindly help me with a link where i can buy it online. Thank you
Mine has all inputs and output meters responding but no audio from Main, phones or any output. The problem was heat related and intermittent but now all the time. Any ideas to help? I am an experienced engineer but can't get a schematic anywhere and I live in Brazil now...Help!
Olá bom dia. Tudo bem ? Você conseguiu consertar seu mix ?
ola minha mesa é uma presonus 16.4.2 ele funciona alguns minutos depois trava o led GR E MUTA TODO O SOM SABES COMO POSSO CONSERTAR ISSO
danos do módulo firewire, entre em contato com um revendedor autorizado em seu país.
www.presonus.com/buy/international-distributors
hi i think your trying to repair is the ADC board ( analog to Digital converter board) not DSP board. if the DSP board is faulty the result is hanged system. the GR is gated.. no input no output. and if the ADC board is faulty the result is some channel from 1 to 12 has no signal input output.
bang punya saya presonus 16.4.2 tidak bekerja mixernya hidup tapi hampir semua tombol lampunya menyala tapi di tekan tidak mau mati atau tidak ada respon.. bagian eq dan lain tidak bekerja.... bagian LCD tidak ada tulisan... minta solusinya bang.....
Sir pwde mag tanong yung presonus ko kc bigla nalang nag freeze 16.4.2 classic sir
please replace the Firewire module
Part Number 410-PG11394
For further consultation, please contact the distributor in your country, click on www.presonus.com/buy/international-distributors#OC
estudio live 16.0.2 fire wire en el boton de siste me dice no driver y no la reconoce la computer
podrias ayudarme
Creo que el módulo Firewire está roto
@luis l torres comuníquese con el distribuidor de su país en www.presonus.com/buy/international-distributors#OC
Channel 1-16 presonus saya tdk berfungsi, apakah sdh pasti dsp module nya yg rusak bang? Mohon pencerahan nya bang 🙏, thanks sebelum nya
Apakah indikator LED GR menyala semua..?? kalau iya berarti yg rusak modul Firewire.
kalau rusak DSP biasanya hanya beberapa channel saja yang tidak berfungsi.. kadang kadang beberapa channel berfungsi kadang mati.
Punya saya channel 5-16 gk fungsi,,apakah krna dsp juga?
iya, betul..
@@creativera2180 pin sama kh bang dgn 7805?
@@rifanimannoorisya8062 sama..
@@rifanimannoorisya8062 ua-cam.com/video/fA2I4KFWWWk/v-deo.html
Bro tengo la mía bloqueada usted sabe la solución ?
please contact the distributor in your country, click at www.presonus.com/buy/international-distributors#OC
Disculpa la mia esta igual es una de 24.4 canales presonus ya pudiste acerla funcionar???
Mixer presonus sy eror menyala merah di GR ny harus bagaimana?rusak apa ny ya bang?cara rebooting ny gmn?
rusak modul firewire nya
pak punya sy ga mau start, nyala cuma sampai loading ajj knapa yaa? lokasindimana biar saya kirim barangnya buat di servis
www.presonus.com/buy/international-distributors#OC
Indonesia
PT. Panca Inti Bermitra
Pergudangan Prima Center 1 F15
Jl. Pool PPD No.11 Pesing Poglar - Kedaung Kali Angke
Cengkareng - Jakarta 11710
Phone: +62 21 2967 1425
Meron po kami problema sa presonus namin na 24.4.2 Wala na po lumalabas sa lcd nya pero may power. Tapos hinde na rin ma control
Kumusta ka ..
suriin ang output boltahe ng 6 volts SMPS (Power supply). at sa ilalim ng module ng LCD mayroong isang module ng kontrol, subukang palitan ang regulator sa control module ng IC 7805.
Thanks for this video, mine just died at a show, plop screen rebooted and then eveything went down and did not work. I just used it for 10 times in 3 years. I still have it but after seeing this i maybe look into it one day. I guess the pcb but weird that it rebooted and then died…
EDIT: I found the problem R26 and D13 seem to be burned on the PCB, also R17 seems to have some blackend on one side, but this could be from D13. Anyone know how to get my hand o a new PCB, i think i can replace those components myself, but i don't like to work on a powerboard, because it hold chage.
If someone can give me the value of those components for replacement i could ask a friend to help me. Or know a place in Europe ehere i can order the 400-PG2PWR (however i saw that there is a newer version 410-PG2PWR?) i would be very happy
Did You find out the number of the diode? Agave the dame problem
Hello Sir pwede parepair sayo?
Hello sr
Para que hacen eso videos si no son instructivos mejor no hagan nada