Quick Tip - Exhaust Pipes and Clamps
Вставка
- Опубліковано 1 жов 2024
- Don't forget to Like and Subscribe for more! - goo.gl/XtV9CJ
Here's one seemingly minor detail that can go overlooked with Diesel Exhaust Pipes and clamps. Something so simple can really slow down assembly and cause a lot of frustration.
Great tip on the clamps!!! My mechanics have replaced the gaskets five times and it kept leaking. I go out and check, sure enough they are on backwards!
I’m leaking from the clamp closer to the turbo (2019 Cascadia) replaced seal and clamp 3 times and it still leaked causing smoke when burning off. This time I put new exhaust pipe, new exhaust manifold piece that 7th injector is bolted to , new 7th injector (injector housing, injector and seal) and new clamp and seal AGAIN! after all that it STILL LEAKED!!
Sorry if I missed it, but did you say which orientation it should be?
I.e does “steeper angle” side sit on muffler side or dowpipe?
Thanks for a educational vedio, exhaust leaks causes fault codes, and can lead you in a different direction in diagnosis, if you don't check for good tight exhaust connections!
+Mad Motor Repair That is very true. Glad you liked it!
New volvos don’t have bellows. You have to buy the whole turbo flex pipe and it’s $1400 CDN. WHAT A RIP OFF
I’m leaking from the clamp closer to the turbo (2019 Cascadia) replaced seal and clamp 3 times and it still leaked causing smoke when burning off. This time I put new exhaust pipe, new exhaust manifold piece that 7th injector is bolted to , new 7th injector (injector housing, injector and seal) and new clamp and seal AGAIN! after all that it STILL LEAKED!!
Wow I put everything new and still leaking i sure this is my probleproblem, tha k youuu
Great tip. Something you could easily over look
Can u make a video on the isolator bushing on the gear stick on freightliner cascadia?
Thanks you are right I made big mistake Thanks
Thanks for sharing knowledge
Great video
I was about to swap my bellows for a flex pipe to save money but after your video I’m just gona spend the extra money and get the same part thank you
THANKX A LOT for education.
Thank you
Thank you Sir!!!
👍
Great tip
Men you are not lying man it's an headache I'm still trying to figure out why I'm still having leaks when I do Regen on my dd15 It leaks from the turbo pipe to the flex whatever that pip call flange Bell pipe whatever it's called and then the second elbow I think they sold me the wrong clamps I'm not sure what size or how or what.
I am having the same problem in the same location on my volvo. I have been through 4 clamps and 5 gaskets. It is still leaking. Did you ever fix your problem? And how?
I’m leaking from the clamp closer to the turbo (2019 Cascadia) replaced seal and clamp 3 times and it still leaked causing smoke when burning off. This time I put new exhaust pipe, new exhaust manifold piece that 7th injector is bolted to , new 7th injector (injector housing, injector and seal) and new clamp and seal AGAIN! after all that it STILL LEAKED!!
Thank u!