Vaillant ecotec plus loosing pressure
Вставка
- Опубліковано 6 лют 2025
- Heating and Boiler repair specialists in West Midlands
www.3tgas.co.uk
0800 9997870
Instagram the_mental_gas_man
MENTalk mental health advocate
www.MENTalk.online
Baxi ,Worcester Bosch , Viessmann, vaillant, ATAG, main , megaflo, ferroli, Ravenheat, navien , grundfos, wilo, Heatgeek, Intergas , talon , heatrae sadia , adey, boiler repairs , boiler servicing, central heating , boiler installation, new boilers , power flushing , vdi2035, magna clean , adey chemicals , faulty pumps , faulty pcb’s , diverter valves , balancing , efficiently , gas engineers
This chaps fantastic , awesome and everything else , learnt so much from this conversation....these were the workman back in the day that working families relied on to keep there heads above water ....friendly honest ...accountable ....well done you fella
Love the honesty. 100% accurate as to the findings out there in relation to replacing parts vs repairing which is a concern.
Thank you buddy you don’t learn nothing by just changing parts all the time, I always try my best to repair everything
Wish all plumbers/boiler services were as good and thorough as this guy. Superb. If only you were close to Liverpool I'd be on the phone now!
Thank you 🙏🏽
Love your thoroughness and the way you talk to the customer, he trusts you 110% and you have a customer for life. He clearly had zero trust in the guys that came before. They clearly had not serviced it properly not noticing the gas supply line was below spec - amongst other things.😳 Keep up the good work.👍
I was just about to ask you all about expansion vessel sizing for the property size etc then you answered it perfectly
Another great video 👊💯
That boiler was in mint condition. All it needed was a proper engineer to spend time on it instead of creating work by changing things on it. Top job buddy
The PRV costs £10. If you remove it, just change it.
You can just tell he knows what he's doing. The clarity with how he speaks (despite the accent).
Great Video ! , very informative & professional 👍 . good tip to remove all the water from system by pumping expansion vessel . I pumped to correct pressure , repressurised the system . and heating is now running better than before ! Thankyou for your help . liked & Subscribed
I like your way of cleaning the prv 👍, much better than taking the whole part out, less water to clean up and the rubber around it is a pain to refit, to keep it room sealed
Fabulous informative video many thanks
PROPER SERVICE !!
I keep getting pressure drops and after a year my prv keeps leaking...so im guessing need to put air in expension vassel.
I love the way hes blowing your trumpet lol.
How much pressure do we put in new vessel? My technician put 1.5 bar in vessel and either i put 1.2 or 1.5 to close water system the pressure rises to 2 bar on heat
1 bar is correct
@@Ed-fp9rx can i press the valve of vessel to de pressure it slowly? DOES 1 bar in vessel lower water pressure?
@@Metco81 if you press the strayder valve in expansion vessel air will come out, most manufacturers say to pump expansion vessel to 1bar. no it doesnt always lower water pressure
Is 2 bar dangerous or is usual water pressure? If i leave it at this pressure?
@@Metco81 no not dangerous will be fine
Did this boiler have a fault code?
Just drain the boiler by turning the PRV it's faster and easier.
But what happens when you get shit on the prv seating!
NOT a good idea!
@Kevin W easier and cheaper to replace a bad prv than boiler isolation valves that leak when you turn them back on
@johnmelling9950 yes mate I had to change water pressure sensor on my boiler and didn't want to isolate flow and return heating because of that reason ,it possibly leaking.
I was lucky my boiler is in upstairs cupboard so rad pipework runs below boiler level .
Just opened drain off drained out , front and side panel off new sensor greased up and ready old out new one in hardest bit was fiddling with the clip going back in don't like messing with them isolation valves
@@kevinw7419 It's a £10 part, just replace it as a matter of course. The time and mess saved more than covers that.
What is that recharger device your using. Nice to see a digital version than a good old bike pump
Its a Milwaukee M12 Inflator
As ukjay said m12 inflator by Milwaukee
Deffo m8. See it all the time, which is ruining the trade reputation. Keep up the great work 👍
Customer is right, if plumbers were honest, they'd get customers for life and referrals.
What did you do in regards to the low inlet pressure. Hate finding this on existing installations, always a pain in the arse explaining to customers and trying to get them to do anything about it.
At risked it mate , and forgot about it 😂 I’ve stopped caring in that respect , advised this will effect heat up times in hot water and efficiently if boiler and also can’t achieve proper fga readings because pressure is low
Cheaper to replace than clean, it's a £10 part.
Have you got a link for the 7mm spanner used to drain the system down please?
FFS!
Do you travel to London? I'm fed up of ''service'' meaning doing sweet F'all or ruining things.
The customer is quite right, cowboys are a problem.
Thank you man your video has helped me find a leak in my system, unfortunately i dont know what the component is do you have an email or whatsapp for me to send a photo to advise further
I think valliant knows this and intentionally makes the part which is not durable. for small o ring people have to buy whole part and pay 10% of the new boiler. shame on vaillant.
It's a shite company like most of these manufacturers. The fact most plumbers are quite incompetent too doesn't help.
Of course they don't. These are great boilers.
It’s losing btw
vaillant intentionally makes diverter valve with cheap rubber seal which is not durable and wears down so customer have to purchase whole diverter valve just for 20 pence seal wears off. why do they need to sell one with motor etc? it is a big cone at large scale
You can but the seal kits. FFS!
@@byteme9718ffs