Awesome video. Switched out the new coil for another new coil for I listened when you said "new coil bad out of the box." Bam! Working now with zero issues. Many thanks. Very helpful!
I had this message on my Aegis X Zeus today. I got together $150 to get another one, then checked out this video. Saved myself $150. All I had to do was change the coil and the message disappeared. Thanks mate, much appreciated.
OK!!!! God bless you, man. I was forced to stop vaping, due to Covid19 and financial problems. I had my one favorite mod and 4 atomizers. Sold my other mods to get some money. And today, I bought an e-juice bottle and made mod setup, ready to vape. But the famous circuit problem had occurred. I've been working on my mod for 3 hours, to solve whatever the issue is. Watched a few UA-cam videos to find solutions, but nothing. Then suddenly you flew in an saved the day. Finally after 2 years of no vaping, I'm HAPPILY VAPING again!!! Thank you so much. I believe it's my duty to subscribe to you now.
I swear to god you are the best, my eleaf got problem since in the morning I was completely confused, boring sick cause I wanna smoke, I went to UA-cam and I typ how to fix it, honest to god I watch many videos nothing comes out, I lost hope but the time I started watching your video and following your instructions I swear to god I swear to God I swear to God everything came back normal...thank you so much king thank you so much mr. Thank you so much miracle ❤❤❤❤❤💗💗
I literally just bought a Smok Morph 2 today so that I could stop spending $10-$20 every 2 days on disposables…… and this thing started giving me the No Atomizer messages damn near immediately right out of the box. Thank you for this video, I think I was screwing the Coil in wrong and it wasn’t seated properly
It worked!!! Thanks!! I had to clean off the little metal bumps that are sitting down in the vape body. I think you called them connections. Thanks again!
I was so upset. My message on GeekVape T200 said, "no atomizer." I love this mod. I'd had it just one month. Vaping with z coils just perfectly. TY, Johnny, for step by step. Followed. End result: I had a bad coil. It happens. Here in CA, fortunately, I have a stash from online vape stores of coils I regularly use. Just so community knows, I also love my Hellvape 200(new) & my GV Aegis Legend: the one with the rugged leather, gun metal exterior. This mod sports a Zeus atomizer I bought separately. Awesome video. I hit the subscribe button. For sure, I'm @ beginners status. Hope to view 2024 Totally Wicked tricks & new picks.
Shifting The height of the pin if you’re connector is adjustable like mine is sometimes with a new cartridge if you shift it up or down it might help or worse in your connection just saved me
thanks some much , ive got a smok r-kiss kit and it has the message on saying no atomizer and i looked at this video and i fix the problem thanks so much
Great video... unfortunately I've tried everything and it's still not working. It's the atomiser that's the problem as I've tried it with multiple batteries - annoyingly I don't have a spare atomiser though. Happened completely out of the blue... Very bizarre!
Hi there, atomizer heads can just stop working, especially if they have been used for a little while. It also depends on what power you are vaping at and what juice you are vaping, these can all affect the life of your atomizer. - Rachel
@@totallywickedeliquid hi i bought a vape today and i set it all up but as soon as i try to use it it says no atomiser. ive changed coils and trued the connection but it isnt working
I apologise if this has been asked before but, I two Tecc Arc mini’s, one old one new. They will not only work if the tanks are not tight, they short out when the tanks are tightened down properly? Any help would be greatly received… from anyone 😄 Merry Christmas! 🎄
What's up with the little metal wire coming from the metal plate on the tank to the coil, I'm assuming it's a neutral? Can that making bad contact cause the error issue
My rpm 80 just started saying no atomizer my old coil was burnt so I do my usual coil change and I fill it up with juice let it sit for 10 minutes then it says no atomizer I cleaned my whole tank put a old coil in to check it I even cleaned my connections and my whole connection area idk what to do any help would be appreciated
I had the same problem… What I did was install my coil but didn’t push it all the way in, and popped on the top and the No Atomizer was gone and unit started working normal again. I guess that the connection balls wear out slightly, and when coil is inserted all the way into the tank, it doesn’t make contact with the battery terminals… That’s how I fixed mine… Hope this helps 👍🏻
Hi Jack, what set up are you using? Also, even though your coil is brand new, they can be dead on arrival. Have you tried changing the coil to another one? - Rachel
If you have a "dud" coil, you can always fix that problem. This might only work with mesh coils. I'm not sure but those are the types I use. Pull the bottom of the coil off. You should see 2 thin metal rods leading up into the coil that hold the cotton in place with a mesh screen. One of the rods should be resting on the top of black rubber piece. The issue I noticed was that rod was cut too short causing the coil to not work properly. That rod should be resting between the bottom metal piece of the coil and the rubber but mine wasn't long enough to reach. So I pushed the mesh screen down a bit until the rod extended past the rubber. Then I bent the rod slightly so it would curve over the rubber ring. I put the bottom metal piece back onto the rubber piece, sandwiching the rod that I just adjusted. I tightened my coil back on and tested it without the tank on and it finally fired properly. Sometimes you'll get a reading that says "ohms too low". My reading was 0.05 and that's because the tip of the rod was only being sandwiched between the metal and rubber. Just make sure the rod is long enough so that more than just the tip is being sandwiched. After readjusting the rod, my ohm reading was 0.18 and the "ohms too low" message stopped appearing. Was about to throw the coil in the trash until I looked at the inner parts and compared them to my old coil. Hopefully this will help. It's very inconvenient to have a "dud" on your last coil but there's a chance that it can be adjusted so it's not actually a dud. Fair warning, the connection rod in the coil might be way too short to even adjust. In that case, then you've got a dud.
Not sure if you'll see this but, my argus was knocked off the table yesterday and since then I haven't been able to clear the check message. Checked the pins, tank, changed the coil, cleaned, and reset the data. So would you agree that I have to get a new mod?
Hi there, this sounds like your coil isn't being read properly. This can point to an issue with your mod or the atomizer head. The first thing you have to do is try a new coil and see if that works. If it does, its just a dud atomizer head. - Rachel
hey great video but nothing worked!, i’ve got a rpm4 but no use i’ve cleaned everything and took the coil out and put it back in but no use what should i do!
My Smok NFix started doing this...bought a new one...lasted a week and started doing this again...says pod detached on placing it in...and no atomizer when sucking...I think I am done with smok, to many problems....
Hello, so my friend told me i can just wash the coils with hot water and dry them to make it less burnt bc i didnt have another coil i did it on both of my boxmods and after that it said check atomizer so i watched this tutorial did everything like you said and it still didnt fix it so some time went by and now i have bought coils the exact ones that i had before so i put it in and it still said check atomizer and now im really frustrated so could u pls help me bc i have 2 vapes that dont work. Thanks
On the e100 there’s two prongs we’re the pod sits. Mine lost its spring function and the atomizer doesn’t work no matter what I do. Is there a fix for this ?
I have an older mod it’s a smok veneno and I accidentally had it set on 225 watts and I think I burnt the coils on the cartridge but the cartridge works on everything else but the mod it keeps saying no atomizer
Ive done this ive cleaned the connections on the vape body and ive changed the coil in the tank and i still get the message no atomiser so annouying ile just bin ot i cba messing around
I GOT A SMOK RPM80 almost 2 YEARS ago. My connections under my top are sunckin it and wont pop out. the vape store i bought it at told me its not good anymore. i tried take it all apart i think all i need is a new connector
Same issue here..Smok X Priv Baby..mod itself is about 2 years old and like many i bought new coils and change them on a regular basis..but now neither mine nor my wife's are working..both say no atomizer.. Last time i changed coils i changed the tank itself to the larger glass Smok put in the box. I hope its just a coil issue so i dont have to spend another 100 for new kit.
Hi Carl, after that amount of time the 510 pin can just reach the point of being worn. Springs go and parts wear out. If you have tried new coils and a bit of light maintenance as in the video, the next stop is a vape shop to see if they can diagnose the problem. But there is a chance that it might mean a new kit. - Rachel
I’ve just received the Hannya 230w box mod, and I’ve been using a DeadRabbit V2 which is only 2 weeks old, has been working fine on my Vaporesso gen S but will not work AT ALL on the Vapelustion Hannya mod, both connections are clean and coils and cotton inside my RDA are only a week old. I don’t know what I’m doing wrong😩
i just got a rpm 4 i had just got a new mesh coil and i would let it prime with juice before hitting it and now it’s saying no atomizer i’ve cleaned the tank and the coil but nothings working
Hello i used a duel coil tank called lotus rta and when i tried to use my single coil pharaoh rta it shows check atomizer and i did all the things you said but it still not working and i can see the connector on the lotus rta is a little bit wider than the pharaoh rta i am using drag 2 mod
Hi Maya, it looks like this is a common issue with the SMOK RPM 40. Try replacing the coil, making sure everything is wiped down with a clean cloth or tissue and try again - Rachel
I seem to get .11 ohms on tfv9 and tfv18 .15 coils a lot. I unscrew the tank and screw it back on like 10 times and it works fine again. It never does this on the Falcon 2 tank. I'm starting to think it's a Smok thing.
I keep getting this message all the time and I'm trying to work out why it's happening. I don't vape every day, just on the odd occasion. To explain, I had the Aspire Zelos 2 and then upgraded to the new Nautilus 3 tank. Then thinking it was the mod I bought a second-hand one the Uwell Ironfist. I don't want to waste more money but I'm just thinking maybe it's the Nautilus coils and my bad luck and should I just buy a complete new modkit. I've tried everything to resolve these issues and I'm just flying through coils every month. Not sure what to do but any advice would be appreciated.
I have a novo 4 and today I got new coils for it,it was working perfectly and then it just stopped producing smoke even while it was hitting,any ways to fix this?
Please I need you your …I just gat a new target mini starter kit and it was delivered to me on Nigeria …the news vape show check atomizer till now ..I haven’t even puff once at all
i just got a fetch pro kit from smok, and it just doesnt work no matter what I do. If i Attach the pod, the mod will say "Pod detached", though it does that when i actuall detach the pod too. Ive cleaned up the 510 contacts on both sides, nothing. Both the coil and the mod are brand new, just like the battery. I cannot put the tank on another mod since its magnetically attached and the shape doesnt fit into any of my other devices. What do I do now? thanks for the response in advance.
The top got stuck in the mod and wouldn’t un screw but turned and turned and turned and did I say turned and turned and turned until I using needle nose pliers and got it off. But another mod I put in it I use on another mod JUST FINE, it isn’t working on the mod where a top got stuck. I’ve followed all your steps and still receive the error message “no atomizer”
Mine is only 3 days old, today it started saying, no atomizer. I tried it, still no luck. I guess it doesn't matter! On my last vape bottle! Banned here in MD.! 😪
Lol the coil was bricked that's why it said no Atomizer I just replaced the coil and bam does it work like new now. The coil was not primed proper and the juice bricked the coil.
Whenever i screw my tank into the mod all the way it will give the automizer short message but when i unscrew it alittle bit it works fine....................................Is it normal to have vape juice leak into the base of the tank?
Hey guys I have a reuleaux rx75 that is experiencing the no atomizer problem. I've tried everything in your video but I've come to believe that the 510 pin on the mod has been pushed down too far and isn't making a connection, any advice?
Sir i have vaporesso Attitude kit Check atomizer is displaying in my vape please help me out i have done all the steps which are shown in vedio but nothing happened please help me i will be very thankful to you 🙏🏻🙏🏻😔
Hi there, sorry you are having a problem with your vape. In this situation it is usually always the coil that is causing a problem, have you tried changing your coil? - Rachel
Awesome video. Switched out the new coil for another new coil for I listened when you said "new coil bad out of the box." Bam! Working now with zero issues. Many thanks. Very helpful!
I had this message on my Aegis X Zeus today. I got together $150 to get another one, then checked out this video. Saved myself $150. All I had to do was change the coil and the message disappeared. Thanks mate, much appreciated.
I have the zeus x rta and i have the same problem from when i changed the mesh. Do you think that the meshes might be the problem?
It will come back man, i have a new set and forced to battle with the problem 4-6 times a day, trash..
I bought like 5 extra coils tried two new ones still didn’t work I got the aegis e100 I believe. Piece of junk
OK!!!! God bless you, man. I was forced to stop vaping, due to Covid19 and financial problems. I had my one favorite mod and 4 atomizers. Sold my other mods to get some money. And today, I bought an e-juice bottle and made mod setup, ready to vape. But the famous circuit problem had occurred. I've been working on my mod for 3 hours, to solve whatever the issue is. Watched a few UA-cam videos to find solutions, but nothing. Then suddenly you flew in an saved the day. Finally after 2 years of no vaping, I'm HAPPILY VAPING again!!! Thank you so much. I believe it's my duty to subscribe to you now.
oo ah pota
Got me sorted on Aegis Legend 2 and Falcon Legend tank. The coil was in a bit too much, used fingernail to pull connector out a bit.
Nice one lads!
Thank you! Strange thing is my tank worked it’s a different mode and vice versa. I still followed your steps and all is good!!
I swear to god you are the best, my eleaf got problem since in the morning I was completely confused, boring sick cause I wanna smoke, I went to UA-cam and I typ how to fix it, honest to god I watch many videos nothing comes out, I lost hope but the time I started watching your video and following your instructions I swear to god I swear to God I swear to God everything came back normal...thank you so much king thank you so much mr. Thank you so much miracle ❤❤❤❤❤💗💗
Hi there, thanks so much for the comment, we are so happy it helped :) Let us know if you need anything else - Rachel
I literally just bought a Smok Morph 2 today so that I could stop spending $10-$20 every 2 days on disposables…… and this thing started giving me the No Atomizer messages damn near immediately right out of the box.
Thank you for this video, I think I was screwing the Coil in wrong and it wasn’t seated properly
It worked!!! Thanks!! I had to clean off the little metal bumps that are sitting down in the vape body. I think you called them connections. Thanks again!
this really helps me I only tighten the screws in coils. now it detects my atomizer. thankyou!!!
Hi Mark, fantastic news :) Drop us a comment if you have any other issues - Rachel
I know right. Thumbs up 👍🏽
You fixed mine. Connection wasn't screwed on right from my coil to the mod. Thanks!
I was so upset. My message on GeekVape T200 said, "no atomizer." I love this mod. I'd had it just one month. Vaping with z coils just perfectly. TY, Johnny, for step by step. Followed. End result: I had a bad coil. It happens. Here in CA, fortunately, I have a stash from online vape stores of coils I regularly use. Just so community knows, I also love my Hellvape 200(new) & my GV Aegis Legend: the one with the rugged leather, gun metal exterior. This mod sports a Zeus atomizer I bought separately. Awesome video. I hit the subscribe button. For sure, I'm @ beginners status. Hope to view 2024 Totally Wicked tricks & new picks.
Shifting The height of the pin if you’re connector is adjustable like mine is sometimes with a new cartridge if you shift it up or down it might help or worse in your connection just saved me
Thank you! my pin was pushed down to far. I lifted it 1mm and it worked!
Don't know if anybody else noticed this on their travels but very important
DO NOT OVER TIGHTEN ANYTHING
Facts dude. I over tightened my coil on the first one and I ruined the connection. RIP badass Sense mod
Thanks bro. Spilled just all over my hand but back puffing like new. 👍🏽
Really helpful 👍 Thanks for the video.
Thanks so much for the comment Abbie. We are glad you are liking the content. Keep checking back for more soon. 😀 - Rachel
yo thank you so much, i replaced with a new coil and it worked now, its dead on arrival
really helpful saved my money my coil died so i replaced it and it started working again ty
Hi Swar, great news :) Let us know if you need any help in the future - Rachel
Really helpful, I was worried for a second.
I'm using the Geekvape Easy Legends 2 device, and the No Atomizer came out. The tank is also using the Wall Tank 2.
thanks some much , ive got a smok r-kiss kit and it has the message on saying no atomizer and i looked at this video and i fix the problem thanks so much
Yall are amazing thank you soooo much
You are!
Great video... unfortunately I've tried everything and it's still not working. It's the atomiser that's the problem as I've tried it with multiple batteries - annoyingly I don't have a spare atomiser though. Happened completely out of the blue... Very bizarre!
Hi there, atomizer heads can just stop working, especially if they have been used for a little while. It also depends on what power you are vaping at and what juice you are vaping, these can all affect the life of your atomizer. - Rachel
@@totallywickedeliquid hi i bought a vape today and i set it all up but as soon as i try to use it it says no atomiser. ive changed coils and trued the connection but it isnt working
great video mate it helped locate the issue and fix it thank you.
That’s exactly what I used to fix the Vape tank itself thank you for this helpful UA-cam video
I apologise if this has been asked before but, I two Tecc Arc mini’s, one old one new. They will not only work if the tanks are not tight, they short out when the tanks are tightened down properly? Any help would be greatly received… from anyone 😄 Merry Christmas! 🎄
It usually means you've over-tightened it when re-connecting to the battery, just slacken it off a little & keep adjusting until the notice clears.
Hi Steve, Great tip. Over-tightening is notorious for causing this error message. - Rachel
didn’t work for me even when nothing is on the vape mod it still says no
this comment alone saved me
Man this tip was legit dope 😂😂 Ty
Bingo
What's up with the little metal wire coming from the metal plate on the tank to the coil, I'm assuming it's a neutral? Can that making bad contact cause the error issue
loosen the coil fixed it, thanks
Hey person whoever u ar in this video thanks cuz of u ma ecig works thanks gnna recommend this video 2 ma boyz 👍🏽💯
My rpm 80 just started saying no atomizer my old coil was burnt so I do my usual coil change and I fill it up with juice let it sit for 10 minutes then it says no atomizer I cleaned my whole tank put a old coil in to check it I even cleaned my connections and my whole connection area idk what to do any help would be appreciated
#2 stroke nation You might hav put the coil in to far in take it out and gently put the coil in that’s why I did and it worked👍🏽
@@harisahmed4589 I did that and still no help
Same
@@harisahmed4589 .
I had the same problem… What I did was install my coil but didn’t push it all the way in, and popped on the top and the No Atomizer was gone and unit started working normal again. I guess that the connection balls wear out slightly, and when coil is inserted all the way into the tank, it doesn’t make contact with the battery terminals… That’s how I fixed mine… Hope this helps 👍🏻
Nice one just saved my vape!
Enjoy!
My mod is working and the coils are brand new. Why is the message still there?
Hi Jack, what set up are you using? Also, even though your coil is brand new, they can be dead on arrival. Have you tried changing the coil to another one? - Rachel
Also, make sure the coil is sitting in snug, sometimes it can feel like it is but it's not all the way tight, that was my issue.
You Friggin saved my Vaping Lyfe Smh
Hi there, thanks for the comment and fantastic news :) - Rachel
If you have a "dud" coil, you can always fix that problem. This might only work with mesh coils. I'm not sure but those are the types I use. Pull the bottom of the coil off. You should see 2 thin metal rods leading up into the coil that hold the cotton in place with a mesh screen. One of the rods should be resting on the top of black rubber piece. The issue I noticed was that rod was cut too short causing the coil to not work properly. That rod should be resting between the bottom metal piece of the coil and the rubber but mine wasn't long enough to reach. So I pushed the mesh screen down a bit until the rod extended past the rubber. Then I bent the rod slightly so it would curve over the rubber ring. I put the bottom metal piece back onto the rubber piece, sandwiching the rod that I just adjusted. I tightened my coil back on and tested it without the tank on and it finally fired properly.
Sometimes you'll get a reading that says "ohms too low". My reading was 0.05 and that's because the tip of the rod was only being sandwiched between the metal and rubber. Just make sure the rod is long enough so that more than just the tip is being sandwiched. After readjusting the rod, my ohm reading was 0.18 and the "ohms too low" message stopped appearing. Was about to throw the coil in the trash until I looked at the inner parts and compared them to my old coil.
Hopefully this will help. It's very inconvenient to have a "dud" on your last coil but there's a chance that it can be adjusted so it's not actually a dud. Fair warning, the connection rod in the coil might be way too short to even adjust. In that case, then you've got a dud.
Thanks I fixed mines with in two mins it wos new but coneing up that so cleaned it put liquid in it and away it went happy days
Thank you for your very comprehensive trouble-shooting answer to this problem!
Thanks I just righted the coil.
Hi Jesse, thats great news. Thanks for the comment - Rachel
Not sure if you'll see this but, my argus was knocked off the table yesterday and since then I haven't been able to clear the check message. Checked the pins, tank, changed the coil, cleaned, and reset the data. So would you agree that I have to get a new mod?
Hooray solved in 10 seconds thankyou
I have an error message on my smok mag saying ohm too high and the numbers going up to 5000 is there a fix or not?
Hi there, this sounds like your coil isn't being read properly. This can point to an issue with your mod or the atomizer head. The first thing you have to do is try a new coil and see if that works. If it does, its just a dud atomizer head. - Rachel
I give up with mods, always been a hassle. 🤦🏻♂️
Same
Wtf bro same I thought this would save moneyyyy
Thanks for the explanation!
Hi there, no problem at all :) Thanks so much for the comment - Rachel
hey great video but nothing worked!, i’ve got a rpm4 but no use i’ve cleaned everything and took the coil out and put it back in but no use what should i do!
Lol problem fixed! Thank you!
My Smok NFix started doing this...bought a new one...lasted a week and started doing this again...says pod detached on placing it in...and no atomizer when sucking...I think I am done with smok, to many problems....
Same here bro💔🥲
Hello, so my friend told me i can just wash the coils with hot water and dry them to make it less burnt bc i didnt have another coil i did it on both of my boxmods and after that it said check atomizer so i watched this tutorial did everything like you said and it still didnt fix it so some time went by and now i have bought coils the exact ones that i had before so i put it in and it still said check atomizer and now im really frustrated so could u pls help me bc i have 2 vapes that dont work. Thanks
On the e100 there’s two prongs we’re the pod sits. Mine lost its spring function and the atomizer doesn’t work no matter what I do. Is there a fix for this ?
Bought the Geek Vape aegis boost and kept it laying for a long time, now it won't turn on or charge. Any help please?
I just bought the yocan Uni and it keeps saying no atomizer idk what to say
I have a smok regal and it's saying no atomizer and it's with two tanks when I try to run cloud beast kings and t6
I have an older mod it’s a smok veneno and I accidentally had it set on 225 watts and I think I burnt the coils on the cartridge but the cartridge works on everything else but the mod it keeps saying no atomizer
For me, it was a dead coil on arrival. Thanks!
your comment helps me
Thank you for helping me out
Ive done this ive cleaned the connections on the vape body and ive changed the coil in the tank and i still get the message no atomiser so annouying ile just bin ot i cba messing around
Thank you all fixed 🙏
I GOT A SMOK RPM80 almost 2 YEARS ago. My connections under my top are sunckin it and wont pop out. the vape store i bought it at told me its not good anymore. i tried take it all apart i think all i need is a new connector
Same issue here..Smok X Priv Baby..mod itself is about 2 years old and like many i bought new coils and change them on a regular basis..but now neither mine nor my wife's are working..both say no atomizer.. Last time i changed coils i changed the tank itself to the larger glass Smok put in the box. I hope its just a coil issue so i dont have to spend another 100 for new kit.
Hi Carl, after that amount of time the 510 pin can just reach the point of being worn. Springs go and parts wear out. If you have tried new coils and a bit of light maintenance as in the video, the next stop is a vape shop to see if they can diagnose the problem. But there is a chance that it might mean a new kit. - Rachel
I’ve just received the Hannya 230w box mod, and I’ve been using a DeadRabbit V2 which is only 2 weeks old, has been working fine on my Vaporesso gen S but will not work AT ALL on the Vapelustion Hannya mod, both connections are clean and coils and cotton inside my RDA are only a week old. I don’t know what I’m doing wrong😩
I need some help i have vape juice in my nord 2 tight but it still shows no aromatizator
Sorted,thank you very much,coil not seated properly.
i just got a rpm 4 i had just got a new mesh coil and i would let it prime with juice before hitting it and now it’s saying no atomizer i’ve cleaned the tank and the coil but nothings working
Hello i used a duel coil tank called lotus rta and when i tried to use my single coil pharaoh rta it shows check atomizer and i did all the things you said but it still not working and i can see the connector on the lotus rta is a little bit wider than the pharaoh rta i am using drag 2 mod
i have a smok rpm 40 and whenever i turn it only it stays on the screen ‘pod attached’ and i can’t use it
Hi Maya, it looks like this is a common issue with the SMOK RPM 40. Try replacing the coil, making sure everything is wiped down with a clean cloth or tissue and try again - Rachel
Thank you this video helped
I seem to get .11 ohms on tfv9 and tfv18 .15 coils a lot. I unscrew the tank and screw it back on like 10 times and it works fine again. It never does this on the Falcon 2 tank. I'm starting to think it's a Smok thing.
Thank you!
THANK YOU, YOU ARE SUCH A F****** BLESSING LOL🖐🤣✔
I keep getting this message all the time and I'm trying to work out why it's happening. I don't vape every day, just on the odd occasion. To explain, I had the Aspire Zelos 2 and then upgraded to the new Nautilus 3 tank. Then thinking it was the mod I bought a second-hand one the Uwell Ironfist. I don't want to waste more money but I'm just thinking maybe it's the Nautilus coils and my bad luck and should I just buy a complete new modkit. I've tried everything to resolve these issues and I'm just flying through coils every month. Not sure what to do but any advice would be appreciated.
I have a novo 4 and today I got new coils for it,it was working perfectly and then it just stopped producing smoke even while it was hitting,any ways to fix this?
Shukriya gore bhaii
Please I need you your …I just gat a new target mini starter kit and it was delivered to me on Nigeria …the news vape show check atomizer till now ..I haven’t even puff once at all
i just got a fetch pro kit from smok, and it just doesnt work no matter what I do. If i Attach the pod, the mod will say "Pod detached", though it does that when i actuall detach the pod too. Ive cleaned up the 510 contacts on both sides, nothing. Both the coil and the mod are brand new, just like the battery. I cannot put the tank on another mod since its magnetically attached and the shape doesnt fit into any of my other devices. What do I do now? thanks for the response in advance.
My vape shows 0 percentage and no atomizer and when I switch it off and charge it it shows the bar full help what show I do
The top got stuck in the mod and wouldn’t un screw but turned and turned and turned and did I say turned and turned and turned until I using needle nose pliers and got it off. But another mod I put in it I use on another mod JUST FINE, it isn’t working on the mod where a top got stuck. I’ve followed all your steps and still receive the error message “no atomizer”
Mine is only 3 days old, today it started saying, no atomizer. I tried it, still no luck. I guess it doesn't matter! On my last vape bottle! Banned here in MD.! 😪
Lol the coil was bricked that's why it said no Atomizer I just replaced the coil and bam does it work like new now. The coil was not primed proper and the juice bricked the coil.
Whenever i screw my tank into the mod all the way it will give the automizer short message but when i unscrew it alittle bit it works fine....................................Is it normal to have vape juice leak into the base of the tank?
Looks good rob
Thank you
I have V9 baby meshed and always get check atomizer
Awesome thank you
What if I've tried every thing in this video and about 5 or 6 other videos and it still says no atomizer It's so frustrating
Thank you that information was very helpful
Hi Derek, thanks for the comment, we are glad you found the video helpful :) - Rachel
You’re awesome!!! Thank you
Thanks!
Hi there, no problem at all :) Thanks so much for the comment - Rachel
Pulled a new pnp tank ,straight out of the box , getting the "check atomizer " msg over and over again , I mean ,it's new ,so wth is wrong ?
So easy! great it worked for me i am vaping again
I have a Maxis 50W vape. And it just keeps saying NO ATOMIZER! PLEASE HELP
How can you fix it if it says pod attached the whole time
It was new given to me with a brand new coil to
Thanks its working
Thankyou so much. Because I'd bought a new battery I was blaming that. Turned out I just needed to replace my coil!
Panic over🙂
Fantastic news Debi :) Pop back if you have any questions at all - Rachel
@@totallywickedeliquid thankyou!
Hey guys I have a reuleaux rx75 that is experiencing the no atomizer problem. I've tried everything in your video but I've come to believe that the 510 pin on the mod has been pushed down too far and isn't making a connection, any advice?
Do u know if it may be becomes I have no liquid in it
pretty bummed. my battery i think is dead. the 510 connector pin pulled out of the battery
Sir i have vaporesso Attitude kit
Check atomizer is displaying in my vape please help me out i have done all the steps which are shown in vedio but nothing happened please help me i will be very thankful to you 🙏🏻🙏🏻😔
Hi there, sorry you are having a problem with your vape. In this situation it is usually always the coil that is causing a problem, have you tried changing your coil? - Rachel
@@totallywickedeliquid
Yes sir it is working now thank you for helping me 😊
Love from INDIA 🇮🇳
My mod just won't read any of my c-cell carts, but it will read my yocan NYX wax tank.
I'll try a q tip, but fkd if I know beyond that--
Nice one mate👌
I have this issue on my smok x priv, i need help