Hey I insulated the inside top of mine and sheeted it. Also installed LED strip lighting which is powered by a recessed (in the floor) battery. In the front triangle area, I built upper cabinets and shelving below. Also I used those metal strip brackets on the floor and one side. Very versatile and you can change things up with them. Also installed adjustable hook brackets on each side for clothing, gear, helmets, etc. And lastly I built a fold down bench for sitting and putting my boots on. It folds flat against the wall when not in use. Good luck with your build!
Hey jeff you can get a rectangle water tanke and bolt it to the bottom of the trailer and then have an outlet on the side or hook up a little pump to pump the water if you have enough ground clearance
5:25 good job Jeff, doing the hard work of filming, and you let B unit have the easy work of just rolling and brushing on some paint. Your man treats you right B unit!
No southwick this year.. bummed I can’t see you on the ktm. I see hella haters about “mommy:daddy money. Disregard them, you’re burning race fuel and grinding. Keep entering everything you can. Money and the size of rig does not matter. Chin up keep thumping ! Ktm 👍🏼
Don't forget to take in consideration the front to back and side to side weight distribution in the trailer. I would install a rectangle shape water tank and move it close to or over the axels if possible.
I would use caulking instead of quarter round. Black would be ideal. Makes a water tight seal so you can pressure wash your trailer. You can do both but quarter round is fragile.
J walk bro I have been a inspiration in my life and drive me to get back racing u are a true American role model thanks bro I are a big influence on my life bro good luck dis year
Thanks bro like I said you are an inspiration to me and your videos are helping me my problem is picking lines new Wich I'm working on but it confuses me sometimes but thanks for ur support
A ramp rear door blows though you lose alot of wall space.also frame in in the v nose a heater slash a.c unit then mount the propane tank on the tounge.
use your left over rubber flooring as a baseboard, it'll clean up better than the white painted surface. Black caulking at that joint will make it look clean and seamless. enjoy your build.
Make sure you have a spare tire, jack that works with your trailer and something to get lugs off. If you carry in impact just get the correct impact socket. Four will obviously work.
Love the flooring! Have you considered sealing the edges with clear silicone, so that if there are any spills there is no way of the moisture getting underneath the rubber?
The water tank, because of the weight, should be at least over the axles or just forward of them. Too much weight on the back of the trailer will make it unstable when driving.
I got a single axle 6x12 because im pulling with a V6, fits my microsprint with about 900lbs to spare capacity wise. But I didn't really plan in my head the weight from tools, cabinets, etc. How much does that flooring roll weigh? I've seen rolls that were 150lbs before I gotta be careful with my weight lol
Nice dude, guys this dude listens to his fans thanks Jeff love this and love how it kind of gives us a different look at your personality without the inherent stresses of moto... super cool thanks guys and can't forget #teambridge
Sucks that a lot of us, won’t be able to come and see you in person at the Nationals this year. But, if I can’t make it to Springcreek this year, I’ll be rooting for you from my couch.
Great video I'm looking forward to seeing what you do with the space, have considered weight distribution, especially having to much weight behind the rear axel can make the trailer fish tail.
Nice before and after!!! Looking to put down vinyl flooring on my enclosed trailer too; curious as to whether to weather proof paint floor beforehand or whether laying flooring would cause floor to warp because moisture can’t escape.
Does it have a roof vent? If not, it might be a good add on to do. Also, vents in the helmet/boot cabinet so they don't get all hot and stanky. 😄 looking buttery good job
Seen somewhere low profile water tanks that a guy was able to mount under the trailer so that it didn't cut into the interior room. Bonus of filling it and not worrying about spilling too much water inside the trailer. The low profile tanks spread the weight distribution over a large area (mounted horizontally) so I think you don't have to worry much about the placement other than physical fitment. I'm thinking about buying a trailer and doing the same, so I'd really like to see you figure it out! Heard some pressure washers don''t like the low height of the water inlet though for priming purposes maybe.
Reporter: "So, now that you won the 10 million dollar lottery are you you going to retire?" Privateer MotoX racer: "No, I'll probably keep racing until all the money is gone..."
@@motobrostv1761 idk where your looking because up here in Michigan a halfway decent one in need of tires is $2,500+. Ya might as well buy new for 5k. Hence why I just bought a 30ft schoolbus for 2k 😎🏁
Yo was this your only trailer vid? I cant find the rest. thanks for the vid though sick channel m 5 year old races a ktm 50 pro sr and im in the middle of converting out trailer like this into his race trailer
Rubber mats are slippery when wet. Defintely not a good idea for the ramp. Using truck bedliner is also popular and it can be sprayed on, rollered on and brushed onto the floor and the wall's bottom tirm. At the mating joint area between the wall and floor the bedliner stuff will seal that gap and I have seen people water hose or gently power wash the floor and not have to worry about water getting into the floor or walls.
I just got my trailer and the floor is well used and dirty, so I’m thinking rubber mat. How has this held up to dirtbike duty? Kickstands and tires haven’t damaged the mat? Thanks!
It’s actually from my power washer! I was holding my boot with my left hand and holding the wand with my right hand. Accidentally hit my left wrist with the jet stream. Crazy the damage that water can do at that velocity!
@@JeffWalker84 Holy moly, Better that than riding, I guess. Trailer should turn out nice. One wall, "JWalk" another wall, "B-Unit". Front wall, Ma&Pa-Walk"
Jeff Walker Ayo chill math’s my worst subject!🤘🏻 good luck at lorettas bro , I know another privateer headed down as well. Finish strong for the #orangebrigade
@@JeffWalker84 Make sure you get an amazon referral account. Its not great on the money you get back, it use to be better but its better than not getting any for the program.
I would just caulk the edges with silicone instead of the 1/4 round. That way no water can penetrate. Put a bead down and spray it with windex and wipe it with a sponge for a perfect bead.
Perfect timing I just bought myself an enclosed trailer
Use a roll of skateboard grip tape on the ramp door for those rainy motos or water dripping from power washer. Wanna keep B unit on 2 feet.
Hey I insulated the inside top of mine and sheeted it. Also installed LED strip lighting which is powered by a recessed (in the floor) battery. In the front triangle area, I built upper cabinets and shelving below. Also I used those metal strip brackets on the floor and one side. Very versatile and you can change things up with them. Also installed adjustable hook brackets on each side for clothing, gear, helmets, etc. And lastly I built a fold down bench for sitting and putting my boots on. It folds flat against the wall when not in use. Good luck with your build!
Definitely wanting to put LED strips in eventually! Never know when you’re going to need to work/load at night. Thanks man!
@@JeffWalker84 Anytime! love your vids
How much did insulating the ceiling help with hot days?
@@Huntmx24 A lot
Awesome video, thanks for your time and sharing!!!
Any update on this project? I would love to see pics as I am working on my trailer and wondering how to set it up. Love the paint and the flooring!
Love the American flag 🇺🇸 in your background.
Epoxy with paint chips works great for race trailer floors
Def want to use an adhesive for the flooring. I did.
Buh buh buh buh B-UNIT!! Let’s get it this year Good Luck with all the nationals
Nice video 👍👌
Hey jeff you can get a rectangle water tanke and bolt it to the bottom of the trailer and then have an outlet on the side or hook up a little pump to pump the water if you have enough ground clearance
You should insulate the roof/ceiling & the put some kind of paneling over it to make a nice ceiling. Try to keep some of the heat down.
5:25 good job Jeff, doing the hard work of filming, and you let B unit have the easy work of just rolling and brushing on some paint. Your man treats you right B unit!
Nice Vid Jeff!
No southwick this year.. bummed I can’t see you on the ktm. I see hella haters about “mommy:daddy money. Disregard them, you’re burning race fuel and grinding. Keep entering everything you can. Money and the size of rig does not matter. Chin up keep thumping ! Ktm 👍🏼
Don't forget to take in consideration the front to back and side to side weight distribution in the trailer. I would install a rectangle shape water tank and move it close to or over the axels if possible.
I just broke my left wrist and right shoulder so I’ll be watching you for a few weeks
Any more videos of the trailer build?
It looks way better
Just use some caulk around those edges either white or black would look sick plus it would seal it a lot better than wood!
IM SO EXCITED !!!
Holy crap!! Looks amazing.
I would use caulking instead of quarter round. Black would be ideal. Makes a water tight seal so you can pressure wash your trailer. You can do both but quarter round is fragile.
J walk bro I have been a inspiration in my life and drive me to get back racing u are a true American role model thanks bro I are a big influence on my life bro good luck dis year
That’s awesome man I appreciate it! Glad to hear you’re getting back into it
Thanks bro like I said you are an inspiration to me and your videos are helping me my problem is picking lines new Wich I'm working on but it confuses me sometimes but thanks for ur support
J walk when will the Loretta video be up
A ramp rear door blows though you lose alot of wall space.also frame in in the v nose a heater slash a.c unit then mount the propane tank on the tounge.
Really great diy, can't wait to see the finished product.
Can you make an full tour? Where you show everything to you shelfes and everything
B unit and MAMMA walks be comin in clutch🤘
Can wait to see more of this
use your left over rubber flooring as a baseboard, it'll clean up better than the white painted surface. Black caulking at that joint will make it look clean and seamless. enjoy your build.
Yep, it's official. You're a totally awesome dude, JW.
Put the water tank in the nose of the trailer and use the side door for the hose to the power washer
Make sure you have a spare tire, jack that works with your trailer and something to get lugs off. If you carry in impact just get the correct impact socket. Four will obviously work.
Did you ever make a follow up video?
Love the flooring! Have you considered sealing the edges with clear silicone, so that if there are any spills there is no way of the moisture getting underneath the rubber?
I was thinking the same
Love the PROCESS 😎
The water tank, because of the weight, should be at least over the axles or just forward of them. Too much weight on the back of the trailer will make it unstable when driving.
We fill the tank when we get to the track. The tank itself is very light. Thank you though!
Would you ever take a full time ride into ama motocross from hrc honda if you ever got a chance to ride with them
Might want to put some heavy staples around the edges of the mat and secure it into the plywood
id put black caulking around the flooring
Mount the water tank on the trailer tongue
Get some more of the flooring and do the ramp door with it.
The soh-cah-toa joke made me laugh. I guess being a nerd pays off. We get our own jokes😂
Can’t wait for the next trailer build 👌👍
I got a single axle 6x12 because im pulling with a V6, fits my microsprint with about 900lbs to spare capacity wise. But I didn't really plan in my head the weight from tools, cabinets, etc. How much does that flooring roll weigh? I've seen rolls that were 150lbs before I gotta be careful with my weight lol
looking forward to the season!!! Looks good Jeff
I like those shoes. Great content man!! Good luck this year🤙🏻
yur gonna want to put the water tank near the front. on the tounge if you can. or maybe stick to filling it up at the destinattion
You should put the L shaped metal strips around the edges of the floor and wall. We have the same floor just gray and white walls and it looks great.
Nice dude, guys this dude listens to his fans thanks Jeff love this and love how it kind of gives us a different look at your personality without the inherent stresses of moto... super cool thanks guys and can't forget #teambridge
And Part 2 is located where?
That's what I'm saying
Build a small work bench over the water tank
Trailers are a pain in the ass van still best way to go
whens par 2
You should get aluminum cabinets
9:17 had me laughing when Jeff Yehaaaed😂😂😂
Do you ever plan on making a video of you riding that cr250
Sucks that a lot of us, won’t be able to come and see you in person at the Nationals this year. But, if I can’t make it to Springcreek this year, I’ll be rooting for you from my couch.
Great video I'm looking forward to seeing what you do with the space, have considered weight distribution, especially having to much weight behind the rear axel can make the trailer fish tail.
Is the rubber flooring fuel resistant
Nice before and after!!!
Looking to put down vinyl flooring on my enclosed trailer too; curious as to whether to weather proof paint floor beforehand or whether laying flooring would cause floor to warp because moisture can’t escape.
Did you glue the flooring down?
Does it have a roof vent? If not, it might be a good add on to do. Also, vents in the helmet/boot cabinet so they don't get all hot and stanky. 😄 looking buttery good job
Seen somewhere low profile water tanks that a guy was able to mount under the trailer so that it didn't cut into the interior room. Bonus of filling it and not worrying about spilling too much water inside the trailer. The low profile tanks spread the weight distribution over a large area (mounted horizontally) so I think you don't have to worry much about the placement other than physical fitment. I'm thinking about buying a trailer and doing the same, so I'd really like to see you figure it out! Heard some pressure washers don''t like the low height of the water inlet though for priming purposes maybe.
All I hear is “how do you become rich racing Moto? Start off a millionaire “ 😂😂
Basically
Reporter: "So, now that you won the 10 million dollar lottery are you you going to retire?"
Privateer MotoX racer: "No, I'll probably keep racing until all the money is gone..."
Dude you can buy used enclosed trailers for under a grand
@@motobrostv1761 idk where your looking because up here in Michigan a halfway decent one in need of tires is $2,500+. Ya might as well buy new for 5k.
Hence why I just bought a 30ft schoolbus for 2k 😎🏁
@@jamesbarton875 I hate to inform you short track racing is so so much worse for Cost
Yo was this your only trailer vid? I cant find the rest. thanks for the vid though sick channel m 5 year old races a ktm 50 pro sr and im in the middle of converting out trailer like this into his race trailer
Get a awning off the side of the trailer
Rubber mats are slippery when wet. Defintely not a good idea for the ramp.
Using truck bedliner is also popular and it can be sprayed on, rollered on and brushed onto the floor and the wall's bottom tirm. At the mating joint area between the wall and floor the bedliner stuff will seal that gap and I have seen people water hose or gently power wash the floor and not have to worry about water getting into the floor or walls.
What ever happened to this it was such an inspiration to my trailer build
Jeff, did it wrinkle up any at all when you laid it inside the trailer?
SUBSCRIBED
Update on finished build?
coming along nice Jeff. you didn't need to gluethe rubber flooring in place, just curious. Or is it so thick and heavy you didn't have to really.
Un fan mexicano 🙋🏾♂️
I just got my trailer and the floor is well used and dirty, so I’m thinking rubber mat. How has this held up to dirtbike duty? Kickstands and tires haven’t damaged the mat? Thanks!
Jeff heavy weight should always be on the front of a trailer look up for trailer whipping
Is the scar on your left wrist from racing, what happened ?
It’s actually from my power washer! I was holding my boot with my left hand and holding the wand with my right hand. Accidentally hit my left wrist with the jet stream. Crazy the damage that water can do at that velocity!
@@JeffWalker84 Holy moly, Better that than riding, I guess. Trailer should turn out nice. One wall, "JWalk" another wall, "B-Unit". Front wall, Ma&Pa-Walk"
Jeff I really wanna see the 2 smoker 🌪 she almost done
stolen I believe
2 stroke was stolen
5:28 oh yeah!
What is the water tank for
SOH CAH TOA was Trig bro! lol trailer looks great man
Na it’s geometry, maybe different per school.
Also physics 1 and 2!
Jeff Walker Ayo chill math’s my worst subject!🤘🏻 good luck at lorettas bro , I know another privateer headed down as well. Finish strong for the #orangebrigade
@@the-bt6lc It literally is Triangles. Prolly where the 'Tri' in trigonometry comes from? just a guess
Yo Jeff Do you have a risk racing code? I have the lock and load system and love it
Water tank that far back is a bad idea. Its going to really mess with your tongue weight.
We won’t be traveling with water in the tank! We fill at the track
@@JeffWalker84 Good job both of you!! That was my concern too.
Add the second video of the new setup
How r u going to clean the rubber flooring w that texture
Does the floor have winkles in it? Or did you glue it down?
Put something on the tin roof it will get hot.
No more work on trailer vlogs? :)
Bro me my dad and brother just made a sick toy hauler out of an old box truck for my enduro races
Can you link that coin flooring? I’m doing my trailer now. Thanks.
www.amazon.com/G-Floor-Small-Garage-Floor-Slate/dp/B07YCVBJY7/ref=mp_s_a_1_9?dchild=1&keywords=rubber%2Bcoin%2Bfloor&qid=1596927001&sr=8-9&th=1&psc=1
@@JeffWalker84 Make sure you get an amazon referral account. Its not great on the money you get back, it use to be better but its better than not getting any for the program.
U can put ac in that
Put the nonpotable water tank on the tongue of the trailer
Why did u not race moto 2??
where’s the rest of these vids man!?
I really wanted to see what it looked like when he was totally done . . . did he repost?
I would just caulk the edges with silicone instead of the 1/4 round. That way no water can penetrate. Put a bead down and spray it with windex and wipe it with a sponge for a perfect bead.
👍
What size trailer is that?
What exactly is the tank for?
Washing bike bro lol👍🏻
When is the next episode!!
Aye