Kenwood TM-D710a - Basic Setup & Programming Repeaters
Вставка
- Опубліковано 19 лют 2013
- Kenwood TM-D72a - Basic Setup & Programming Repeaters - I will walk through the basics of setting up the radio and programming repeaters. Comment, Rate & Subscribe.
- Наука та технологія
7 years later and this video is still valid for the TM-D710GA. Thank you! Saved major frustration!
I got one of these radios, read the directions, and watched the video and said"man youtube has gotta have something that makes it simple stupid to program and set up my new radio. Boy this video was a life saver. Thanks.
I was reading some of the comments!
Some people asking how good is the D-700 / D-710 or the D-710G.
I bought the D-700 when it entered the market in the year of 2000.
That was 19 years ago. This radio was set up in APRS mode in Toronto running 24 hours.
Once each year I took it a part and cleaned the dust inside.
About 5-6 times I had to replace the cooling fan.
Not surprise the fan was constantly turning on and off with each transmission.
I had no issues with this radio.
This year I sold my D-700 for 200 dollars. The only reason I sold it because my friend of my wanted it badly.
He is very happy with this radio (LOOKS LIKE BRAND NEW)
About 10 years ago I purchased a D-710 never installed in the car, used it as a base station in a condominium on the 29th floor.
My dual band antenna was on the roof at the shore of Lake Ontario.
I was allowed to install only one antenna and because of that I had to use a coax switch.
One input from the antenna and four out put to four different radios.
I had a good chance to test out different radios (WITH THE SAME ANTENNA)
My two favorite radio was the Kenwood D-710 and the Icom IC-746.
Usually I made the long distance calls over Lake Ontario with the ICOM radio because the 746 is putting out 100W.
The returning stations weren't using high power most of the times.
I was having problems to hear the weak stations, that was the time to switch the antenna to the Kenwood TM-D710 to receive.
The Kenwood radio is much more sensitive than ICOM or ALINCO
I purchased an ICOM IC-2820H for it's D-star capability.
This radio can't come close to the KENWOOD.
Four years ago the D-710 started loosing sensitivity.
The receiving filters started going and I had to switch from FM to NFM mode to pick up the weak stations.
Soon after the NFM was losing sensitivity as well.
I had to make a decision to repair the D-710 for 300 dollars or scrap it and get a new one.
Than UA-cam UNIVERSITY suggested to replace the four ceramic filters. AAAAWWHAT?
Can I do that?
I ordered the four filters (5 dollars each) and I replaced the defective filters with a new one.
Those filter are better than the new ones.
In Canada the TM-D710G cost 700 Dollars.
One hour labour and 20 Dollars saved me 700 Dollars.
I can't comment on the D710G I don't have one but that is going to be my next mobile.
I like the idea to have a built in GPS
THANKS UA-cam!
73' VA3VAD
Thank you so much for presenting this video. I just got the D710G and you made it very easy to program repeaters. You are correct about not really needing to use a PC with the Kenwood MCP-6A program (and required cable).
What an awesome video! Thank you. I just got a Kenwood TM-D710A and this was exactly what I needed to get really started!
I have the D-710 radio for more than 10 years.
D-700 for 10 years before that.
I never bothered to enter the names to the repeater part.
Most of the time I just used them in VFO mode.
Now I can enter the names, make my life easier.
I was under the impression you have to have software to program the names into the memory.
Thanks for the video!
Thanks for the video. This helped me immensely with my new radio.
This video was very helpful! I’m just learning how to use it and taking the test next week!
my favorite video on "how to" on this radio, thanks.
Dang man, Kenwood would sell more radios if they would pay you big bucks for your help in these videos. Thanks so much for the help now 6 years later.
73
AF5DK
Wow, I was watching these videos and realized you were programming local repeaters into your rig, Thanks for the vid, am planning on hitting up AES to pick one of these up soon.
Your video is very helpful. Thank you.
Great video! Thanks for helping me make a purchasing decision.
Thank you for doing this it help me out getting started
Very informative video. Thanks for coming back to me on the Winsystem this ervening and providing your suggestion on the Greenlight Labs GPS for the Kenwood D710. As well, these videos will make learning some of the key features that much easier. 73s...
Thank you for sharing your video. I am going to be purchasing this radio soon for the APRS function.
Well make sure to pick up the newer model that includes GPS!
Thanks for making this so easy to understand and execute. Very nicely done!
Good job, one of the easiest to follow - 73
Great Video! showing the process twice+the samsung phone+the gun mat= my kind of dude! Thanks!
73s
You've saved me some real head scratching. Thank you.
8P6RC or VE3BEO
Thanks for this video. I just got my D710GA and was struggling with the provided manual. Made my first contact via local (only repeater near my location). Thanks
Very informative. Thanks
Thanks for a fab video
I might have considered buying this radio in early 201x to 2015 instead of the Icom 880H. I still have the 880H (works), but I have the FTM400XDR that I bought from HRO online in 2019. Still works. Just haven't installed it in the vehicle. Other things going on right now, so the installation is off to the side for now. Still watching videos to keep up, though. No "Frostfest 2024" in Richmond, Virginia this year. So, I am planning on going to Raleigh, NC "RARSFest" in April 2024.
Welp, I made this video over 10 years ago. Oddly enough I owned a 880h for awhile, it was a great radio. Just difficult to program. This radio is still kicking though in the form of the D710GA. Still a great choice for APRS work.
No Problem Michael, Always happy to help a new HAM out as I did not get any direction from any of the local hams here. Let me know if you have any more questions and I think there are a few good PDF's out there on how to setup APRS properly when you get your GPS in.
Really helpful Thanks
Thinking about heading down to HRO this weekend =) And i agree android has great apps like aprsdroid and glsdr. Thanks again for a great video.
I know this is 5 years old, I am just getting to know this radio since just got the Kenwood TH-D74 and was thinking maybe getting this one because the APRS feature and able to cross band with it; (too bad it does not have DStar) anyways I can not see a better match for the TH-D74; the area I am in is Las Vegas and I have a list with 133 repeaters in the Southern Nevada Repeater List! that is A LOT! my question is do I have to program ALL of them if I am to enjoy max comms possibilities manually in both radios??? or there would be a programming interface to do so instead of manually? 2 repeaters does not seems like a big deal but 133??? Me being new at this I know I want to have them all, lol, just in case; or I just need only one and my radios would pick and program all of the ones it connects to automatically? I know I am registered on the DStar network here but I have not been able to talk to anyone from the TH-D74 except one ham the other day at the local Giga Parts store!
nice video thanks
I noticed that the TM-D710G can scan tones by holding down the tone select key. I haven’t experimented with this feature. Will it locate the required PL tone automatically for a given frequency to open a repeater?
Wow , interesting, low potisi. Las Vegas. Some of the repeaters in LV are connected to CARLA now. This is Mike, N6GRG . I've had my kenwood for a while but my radio I really know how to program is my yaesu 8900. This 710 is easy if you get a few instructions. Thanks.
do you have one for the new tmv-710ga with APRS and Packet
Good morning!
I would like to know if this transceiver is equipped with a voice synthesizer for blind operators?
Thank you and 73s DE IU1HIJ
thanks good video 73
Hi whats the perfect portable match for this base, messege paging etc
what do you click on to in the menue to use the mick keys
I'm learning to use the device slowly... the only problem encountered is that in the VFO I can not set the frequency via microphone numbers .... question : should the microphone be programmed or is it a problem with my radio microphone?? Thank you for your possible response
Hi, I just recently purchased the TM-D710GA. I was wondering how happy you have been with your TM-D710A? How reliable has it been, have you had any problems that required any maintenance neededing to be done to it? Thank you. Jim.
How do you group memory channels to do a group scan?
Do you have any experience using this radio with RMS Express? I am pulling my hair out with TNC NOT FOUND messages. :(
How do you program the CALL button on the upper left of the radio?
Nice
How program 440 side ??? And what mfj power source you using ?? I might buy one. And I need antenna for apartment . suggestions ??
Thanks for the video. Mind telling me where can I get this at good price?
thanks
The programming cable set is worth getting more so the USB FTDI adapter. With it you can connect it to the faceplate and activate digital data/packet modes with a controlling computer.
Is a shorter head cable available for the TM-D710GA? I only need a 3’ cord to connect the head to the radio but I’m having problems sourcing one.
You Should be able to use a regular Cat 5 or Cat 6 cable.
Yup, the good ol' glock mat! Android offers some of the best ham related apps! Including, IRLP Finder & Rfinder (Repeater directory). Did you happen to purchase one of these radios?
Will this radio communicate with the nx-700/800's?
I have just received a TM D710; I am missing the patch cord from radio to head You mentioned a kat 5 [I know little about this Please fill me in ; from where to where does it go? where does the mic plug into also William VE3JEY & VA3EBJ I have >>NO instruction or set up directions as to where anything goes.
For those that might not know, this radio can act as an aprs digipeater without an external TNC. This is way too much radio for typical Mobile Radio use. If you're not going to use APRS or the crossband repeat feature much, you should go with the less expensive Kenwood tmv 71 I believe the model is.
Thanks for the video but when I program a repeater.. and select tone... No T pops up 🤷 all I have is "CTRL VA" 🤦🤷
Why is this radio so expensive, I’ve noticed it’s more expensive than the radios like yaesu ftm 400 with the digital modes?! Are you in the Pahrump/Las Vegas Area? I lived in Pahrump and had that same frequency but I believed it was high potosi?
bam :-)
I have a TM-V708 and can't put in memory. KB9G
Cual es el.precio gracias agradecere repuesta
The menu "display partition..." What does that change?
Couldn't say - I no longer own the rig.
Right now the best price I can find is $499 at HRO. Might find one used at a better price, but that requires luck and patience. (I have little of either)
you did not show how to program the offset frequency and the "+" or "-". have this radio coming next week and trying to learn it before it arrives, like i did my baeofung. informative in all other respects. thanks.
I have KENWOOD TM-D710GA
Would have stuck w/o this help. Too old to figure it out
Gonna buy from ham radio outlet Milwaukee could you suggest power supply reasonable $ and antenna reasonable
In stock if you could could look for me. Novice for 30 years
KB9GIZ just got tech so uhf and vhf new to me. Have 2 meter kenwood thk20 Fm but in valley stub don't work but got mfj-1714s 40 inch ant. And can get to one repeater. Prairie du chine wisconsin. Another message below.
73
Astron is what I always buy! High in quality!
Great video i watch this over and over again because for this radio the menus are impossible to remember. The menu is poorly thought out, wastes buttons (VFO/MR should have been a toggle not two buttons, huge waste of real-estate), i could go on and on. The radio is brilliantly featured, but again, menu setup layout is not intuitive and if you own multiple radios or don't use this radio a lot you will find yourself lost with this thing every time you use it. I own it because its the only cross band'er that i know of that will CWID for you out of the box. IT also wont do less than 25khz steps in UHF.
Yeah, you would think these days it would be much much simpler!
Aquí argentina es usado no hay datos de valor