im still curious on how that whole ECU thing is working. I was thinking of speed swapping my 14 mz3 but im curious to see if the 2.3 speed ECU would run on the 2.0. or vise versa if i was gonna just custom turbo the 2.0.
this is so wild, i bought a mazda 3 2.5L turbo and i wanted to look at other ones and this is literally the exact car i bought, you did a great job building it. it drives super nice but the boost breaks up pretty bad on the top end, can you think of any reason it would do that?
Арсений, привет из родного города Гродно. Смотрю и слушаю с удовольствием. К сожалею, с английским проблема. Но как ты выглядишь, как легко излагаешь мысль - здорово. И машины классные. Ирина Пивоварчик
i have a 2008 2.3l mazda 3 an i just got a gen 1 speed 3 ecu an cobb acessport tranny an all the wiring potentially thinking on swapping it in the future when i get a turbo kit but would that all work?
Will this fit my Mazda 3 2016 touring because the engine layout almost looks the same even thought it’s a 2 liter. Plz reply I can’t find a single turbo build to get an idea off of. Thankyou
You left out the top end , is that from the same car the block is from ? And did you do anything atal to the internals or valves etc or is it just turbo kit , intercooler and Manifold
Hey man is there anyway you could send me some pictures of the downpipe and how you have the 02 sensors setup? I am currently in the process of fabbing up the downpipe for mine
Hey man great video! I have the same generation mazda3 and did a 2.5 swap on it as well. I’ve been looking into turbocharging it and I haven’t really found much. Would you be able to give me the links to the manifold and parts you used? That would be such a great help .
Ok I found a kit and am currently installing it, where did you end up putting your mass air flow sensor? And did you have any problems with your mass air flow sensor after the turbo install?
I know this is a old video but I was wondering if you had any advice an could possibly help me out. So I had a 06 swapped wit 2010 ford 2.5 an 2011 6sped trans.. at first before I got the speed3 shift box I had only gears 1-4 after I had gears 1-5. Now currently I have swapped everything from the 06 into an 09. Have speed3 shift box, 2nd gen cables and only have gears 1-4 an I'm stuck.. please respond any help or info is much appreciated
You need to use Mazda 3 2.5 2011-2013 shifter cables. And speed 3 shifter box. 2nd gear will still feel “short” but the actual gear will still engage. It just feels different
@@Mikeskates420 then you must be doing something wrong. I had that exact same setup and it worked for me. Retrace your steps and make sure the cables are on the correct pins on the shifter box
I have a question without tune how does it feel because I'm with no tune and my AFR scares the f@@#Q& because its around 13.4 out of me but the car feels good in boost how is your car regarding the afr at my end I just need to give it a time to feel the pressure gaining and the car pulls real good on boost I'm also doing 5psi
@@arsenyrazhkov4559 im currently boosting my 2010 2.5 myself, your videos are gr8 and have inspired me to go for it. What brand and size injectors injectors are you using?
BlueWoolSweater Funny thing is, I live in BC Canada, where the winter time is hardly anything. Just minor snow and not really any salt on the roads, and they STILL rusted out. Says a lot about the company and their “performance quality” shocks
Thank you for this! There's literally nothing, no body's doing ths. SHAME! I have a 2012 Mazda 6i. Looking forward to adding a turbo
I have a 2006 mazda 6 i and I literally went with the same setup as this video and its almost done
Oh my god. Good work. I can only envy the money you poured into it :D
Thanks for the video and the mod list. I saw you in the Colton video. I have the second gen 2.5 Mazda3.
How’s it holding up? And is it a sedan or hatch?
@@dc2k453 The 2.5s are actually pretty good motors. The transmissions are junk in the manual though. At least when you mod them
This video was amazing and gives me a chance to see what my end result may look like
Damn man you put a lot of effort into this car, that’s amazing! I want to eventually put a better engine in my Mazda 3 s and turbo it hopefully
Dude that's so damn dope
im still curious on how that whole ECU thing is working. I was thinking of speed swapping my 14 mz3 but im curious to see if the 2.3 speed ECU would run on the 2.0. or vise versa if i was gonna just custom turbo the 2.0.
this is so wild, i bought a mazda 3 2.5L turbo and i wanted to look at other ones and this is literally the exact car i bought, you did a great job building it. it drives super nice but the boost breaks up pretty bad on the top end, can you think of any reason it would do that?
Ayyy keep it up bro
Awesome build man! Do you have any exhaust clips?
Арсений, привет из родного города Гродно. Смотрю и слушаю с удовольствием. К сожалею, с английским проблема. Но как ты выглядишь, как легко излагаешь мысль - здорово. И машины классные. Ирина Пивоварчик
Already know i had to sub a nice sounding clean modded mazda and in my neighboring province
i have a 2008 2.3l mazda 3 an i just got a gen 1 speed 3 ecu an cobb acessport tranny an all the wiring potentially thinking on swapping it in the future when i get a turbo kit but would that all work?
I have a 09 sedan 2.0 5spd that i was going to do the same sort of build on.
Can you use the same exhaust manifold from a 2.3 on to a 2.5?
Yes
Same stud pattern
I’m also thinking of putting a turbo on my 2010 Mazda 3 2.5, what kind of access port did you use or tune kit did you use ?
How much did this process cost you? I’m looking to put a small turbo on my mazda 3 😂
Me too man
Hey I was wondering if the clutch was the same when you swapped out the 5spd to the 6spd
It wasn’t the same but if fits perfect, you can also use your original clutch too
Did you have to use the Axel's from the 2011 or did you just use the stock ones
Also what map sensor did you have to use
I've been thinking of this setup in my wife's 2010 cx7... any thoughts
It will be hard to make everything custom made especially the piping, id just get a turbo cx7
Where you get the valve cover??
Will this fit my Mazda 3 2016 touring because the engine layout almost looks the same even thought it’s a 2 liter. Plz reply I can’t find a single turbo build to get an idea off of. Thankyou
I subbed also nice car brother
Can I do this with my 2004 Mazda 3?
What boost controller are you using?
Was this a na to begin with or a speed
You left out the top end , is that from the same car the block is from ? And did you do anything atal to the internals or valves etc or is it just turbo kit , intercooler and Manifold
Hey man is there anyway you could send me some pictures of the downpipe and how you have the 02 sensors setup? I am currently in the process of fabbing up the downpipe for mine
I have a mazda 6 with same exact setup at his. I could show u some pics
Absolutely, I need to figure out o2 placement and the wideband as well
Hey man great video! I have the same generation mazda3 and did a 2.5 swap on it as well. I’ve been looking into turbocharging it and I haven’t really found much. Would you be able to give me the links to the manifold and parts you used? That would be such a great help .
You can find them all over eBay. Look up Mazda 3 turbo manifold
Ok I found a kit and am currently installing it, where did you end up putting your mass air flow sensor? And did you have any problems with your mass air flow sensor after the turbo install?
I had an AEM cold air intake
Which I modified to fit the turbo, instead of the throttle body. MAF is on the intake piping
@@arsenyrazhkov4559 Did you do anything to the ecm? a tune?
@@arsenyrazhkov4559 do you have a link for the turbo charger
Can u put a acessport v3 on this car
I know this is a old video but I was wondering if you had any advice an could possibly help me out. So I had a 06 swapped wit 2010 ford 2.5 an 2011 6sped trans.. at first before I got the speed3 shift box I had only gears 1-4 after I had gears 1-5. Now currently I have swapped everything from the 06 into an 09. Have speed3 shift box, 2nd gen cables and only have gears 1-4 an I'm stuck.. please respond any help or info is much appreciated
You need to use Mazda 3 2.5 2011-2013 shifter cables. And speed 3 shifter box. 2nd gear will still feel “short” but the actual gear will still engage. It just feels different
I have those, as well as speed3 shift box, still only 1-4 an reverse
@@Mikeskates420 then you must be doing something wrong. I had that exact same setup and it worked for me. Retrace your steps and make sure the cables are on the correct pins on the shifter box
Hi, what injectors you use?
I have a question without tune how does it feel because I'm with no tune and my AFR scares the f@@#Q& because its around 13.4 out of me but the car feels good in boost how is your car regarding the afr at my end I just need to give it a time to feel the pressure gaining and the car pulls real good on boost I'm also doing 5psi
Does it run good? I have one with no tune or fuel system work either runs great
Did the motor just drop in and bolt up with the 2.3 liter wiring harness
Yes
What axles did u run with
BC Gang
What exactly are you doing for engine management?
Mazda edit
👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
How many pounds of boost??
Hey buddy what map sensor are you using ?
christopher olivo speed 3
@@arsenyrazhkov4559 im currently boosting my 2010 2.5 myself, your videos are gr8 and have inspired me to go for it. What brand and size injectors injectors are you using?
christopher olivo Fiveo motorsport 550CC injectors. Glad you like the content!
What happened to the Koni yellows???
BlueWoolSweater
They already rusted out. Garbage product, never will buy again. Cheap quality
@@arsenyrazhkov4559 Oh shit. I never knew that about the konis. I've def heard about rust proofing when installing coilovers. Good to know!
BlueWoolSweater
Funny thing is, I live in BC Canada, where the winter time is hardly anything. Just minor snow and not really any salt on the roads, and they STILL rusted out. Says a lot about the company and their “performance quality” shocks
hi how much are u pushing?
Way too much
Anyone got the link to the turbo?
VanCity Whaaaaat
zoom zoom
Matsuda.