I know! I can’t get enough of it! I buy cars, repair them, then sell them. I wish I had the room/ability to part them out, but rarely do. Sometimes I have to, if the roof or floor is too buckled. I won’t buy them with the intention to part them out, but I just recently had a Jeep wrangler Rubicon 392 that I had to part out. I ended up making a little over 12k in profit, but I was sweating it out for 3 weeks, worrying about it! I had it all figured out to make around 25k in profit once it was repaired, but as soon as it arrived, and I got a good look at the frame, I knew I was screwed. No fixing that one! LOL
No matter how much money scraplifegarage pays for these totalled POS's, it doesn't matter if they are restored and end up back on the road there value will always be WORTHLESS and will always carry the title as SALVAGE so you still lose ScrapLifeGarage
@@lldjslim ok, and? You still unemployed and crying too much on a youtube comment section. Sometimes we restore cars not for the value but for the feeling it gives. Something non-car people like you wouldn’t understand.
once in a while the driver/owner will find their car on a youtube video and reveal how they came to be totaled, I believe the burnt out demon owner was identified but hasnt commented on SLG's videos
@@jasonparker3316 on some of the original demon videos, they talked about him because he left an Instagram sticker on his car, but they blurred it out which I assume was to make sure the guy doesn't get harassed. They also found illegal drugs in the trunk, so they reported him to the police and gave them the instagram handle. The car was abandoned when it got caught on fire.
🎯 Key Takeaways for quick navigation: 00:00 🚗 *Introduction to the Salvage Auction Process* - The video begins with an introduction to the salvage auction process for junk sports cars. - The host explains his experience salvaging damaged vehicles and the potential for making money. 01:18 🏎️ *Examining the Damage to the Dodge Charger Hellcat Daytona* - Detailed examination of the damage to the 2020 Dodge Charger Hellcat Daytona. - Description of severe damage to the front end, driver-side engine bay, and rear quarter panel. 02:40 🧐 *Discovering Salvageable Parts in the Interior* - Exploration of salvageable parts inside the damaged car's interior. - Identification of valuable interior components like Daytona-specific features, fender flare, and more. 03:57 💰 *Assessing the Financial Potential of the Salvage Project* - Discussion of the financial potential of the salvage project. - Explanation of the non-reparable title status and the opportunity to buy the car at a low cost. 05:24 🛠️ *Inspecting Engine and Transmission* - Inspection of the engine and transmission of the damaged car. - Analysis of the engine's condition, noting potential issues due to the accident. 07:31 🧰 *Exploring the Trunk and Finding Surprises* - Exploration of the car's trunk and discoveries inside. - Mention of finding various items in the trunk, including a missing battery. 08:49 🚘 *Stripping the Exterior and Assessing Value* - Discussion of the process of stripping the car's exterior. - Assessment of the value of exterior parts, including doors, mirrors, and more. 10:04 🤔 *Evaluating the Interior Components* - Evaluation of the salvageable interior components. - Explanation of the value in parts like seats, carpet, carbon fiber trim, and steering wheel. 11:54 💲 *Identifying High-Value Parts and Their Pricing* - Identification of high-value parts like carbon fiber trim and their OEM pricing. - Discussion of the potential market for these expensive parts. 13:16 📊 *Clarifying the Decision to Strip Certain Parts* - Explanation of why some parts were left in the car. - Emphasis on the lack of value in generic components due to the car being a base model. 16:38 🚗 *Assessing the Condition of Wheels and Tires* - Evaluation of the condition of the car's wheels and tires. - Description of the damage to tires and the potential resale value of wheels. 18:00 🧬 *Checking Engine Oil and Preparing for Engine Removal* - Checking the engine oil and preparing for the removal of the engine. - Initial assessment of the engine's condition and anticipation of challenges in its removal. 19:08 🚗 *Overview of damaged parts and salvage potential,* - Discussing the damage on various car parts. - Mentioning aftermarket solutions for repair. - Deciding to sell specific damaged components separately. 20:06 🚀 *Front end examination and surprises,* - Examining the front end of the car after disassembly. - Highlighting the survival of the intercooler pump. - Noting some damage but overall better condition than expected. 21:28 🛠️ *Salvaging suspension and parts,* - Discussing salvageable suspension components. - Mentioning the importance of these parts in the market. - Exploring the process of removing the rear end. 23:07 💪 *Evaluation of engine and related parts,* - Inspecting engine-related components and potential damage. - Discussing broken coil packs and other minor issues. - Analyzing the overall condition of the engine. 26:47 📦 *Preparing for part sales and future plans,* - Preparing the salvaged parts for sale. - Mentioning the value of specific parts like seats and suspension. - Teasing the potential projects for the salvaged engine. 28:57 📊 *Analyzing financial aspects and rankings,* - Breaking down the financial aspects of the salvage. - Discussing expenses, fees, and profit margins. - Reflecting on the car's ranking in the Salvage Stories series. Made with HARPA AI
@@scraplifegaragewhat freight carrier and platform do you use to ship your freight items through? Been looking for awhile to find a good cheaper freight service to use
Would those be brushed aluminum or gunmetal? May look good with either honestly, tho white wheels could be cool too. Blue/green with white wheels is always a fun combo, very JDM or Rally esque, tho looks good on a muscle car too as does the gunmetal/aluminum!
I went out an bought a 2019 Challenger 3.6 plus. Only 50,450 miles mint. Inside an out. Paid $21,000. I bought it as a flip. I owned it only 3 months an put only 600 miles. I would like to put a Hellcat motor in it . What I heard it cost was to much. If it didn't cost that much I would love to.. I would like to know what dose it cost for a used motor like that. Year back I could change it over my self. Its hard to believe I'm in a wheelchair lost both my legs above the knees at my job in 1993. In 1998 start drag racing I had my NHRA LICENSE I was running 7.62@165. I am 60 years old now. I would have to pay someone to do it. It would be awesome!!
The Daytona hellcat is very underrated. Especially knowing this car is also for track making it more interesting since most dodge cars are straight line kind of cars.
I'll be honest, I'd probably put that engine in a resto mod 68-70ish B body. Coronet, GTX, Roadrunner, Satellite, and of course a Charger. All great options. I know that's sacrilege to some people, but hey, at least I'd be keeping it mopar.
Y’all need to take all the wiring out while you are in there you can get dumpster sized bin or something and then save it all up and sell it for copper scrap you don’t think it’s worth it but it all adds up over time and copper can be worth more than steel and that could pay payroll for quite sometime and maybe light bill or rent or even sell the harnesses
I’m from the Uk and I’ve been watching you guys for ages great channel 👌. I’d stick that engine in a 1970 MK1 ford fiesta van it would be a flying machine 👍
Id put it in my Dads 1978 firebird formula he got when he was 16 ! His dad passed & he used the money to buy his dream car once he turned 16 ! My dad passed in 2021 & now I have the car & it has no motor or trans ! But someday ima have a demon or Ls motor in it !!
@@scarrface.9102 that is a sick car to get going again, if I had to recommend a motor I would say the LS as parts are easier to find and you can get more HP out of them. plus it is very easy to get a LS going as it doesn't have the like 15 million sensors on it. just a recomendation
No matter how much money scaplifegarage pays for these totalled POS's, it doesn't matter ifvthey are reatored and end up back on the road there value will always be WORTHLESS and will always carry the title as SALVAGE so you still lose ScrapeLifeGarage
This is one of those rare videos where I couldn't wait to read the comments. But to be fair to myself, I watched the entire video first. Just finished with the comments and I didn't disappoint myself. That engine would have greatly enhanced my highly modified Chrysler 300C. Those brakes would have been the icing on the cake.
I bought those carbon parts oem for my rt on ebay a month apart each but daily scalping i got them both combined for 500 and sold for 800 when my scatpack came! They are sought after alot😊
I work at a junk yard dismantling cars, as long as you have the k frame(sub frame) bolted up you show always be fine to drop transmission mount. Unless the K frame seems a bit sketchy
Wow it's kind of sad to see a Daytona that destroyed! I am wanting to buy a Mango Daytona but the dealer has such a high markup that it may not happen! If it doesn't happen I will probably buy a Bronco. Great profit margin on the Daytona! I am looking forward to the next video!
I love you guys videos. I have a question but I don’t know if y’all ever done it have y’all ever hellcats swapped a Challenger or a charger GT all wheel drive and still kept the all-wheel-drive.
i’m happy you’re a Mopar guy now bro and I agree with the interior materials are trash, but so is Chevy and Ford lol love the content bro can’t wait to see the demon finished 🤙🏻
I would put this engine in my 2005 Daytona RAM truck! Regular cab. Go Mango. Only 45k miles. Zero rust. It needs something to make it awesome . Keep the Daytona alive!
ive always wanted to put this engine in a mk1 fiesta as ive seen a v8 in one before but not with that much power tho are you ever going to give one away in a comp as im in uk but would love to enter
It took about ten years of the new age chargers being out for me to finally like them lol. Geez the seat got bent but it looks like the driver walked away from a pretty hard wreck.
Got a Nissan Sentra ser spec v and a 2 door V6 Honda accord with a blown trans both would be sick to fab a hellcat motor in. Fast motor tiny car would be fun
Honeslty I find these episodes very interesting. I love seeing destroyed cars broken down some are gambles but those come up with huge profits sometimes. Love the videos keep it up, wish I had the money to try this but I don’t. Have y’all done any 350z or 370z salvage stories or auctions?
So sad! This was a really GORGEOUS Hellcat Charger Daytona! Now there are even less of them, making the other 500 of them just that more “rare” and desirable! I’m not saying you should have tried to fix this one (With a “non-repairable” title, that bridge is burned) as I knew this one was done, even from 50 feet away! WOW! He/She must have been sore after this wreck!
You asked what we would do with this engine if we had it and I would totally put this in my 1968 Lincoln Continental. I think it would be an awesome Hell Cat Bagger. It would also make for some great content for my channel.
I've got an 08 F250 crew cab long bed 6.4 truck with a blown up engine ( big surprise I know lol ) I've been planning on 12v swapping but a Hellcat engine would work!
I would put that motor in my 1985 nissan 300zx... I wish I had the money and resources to do that it be the first ever... but what do you think about a project like that
Do be you have a website if someone was interested in buying some of these parts I'd be interested in the infotainment system and potentially the seats if they have the same features as my car
It brought a tear seeing a rare mopar trim being destroyed and if I had the funds to build a car I would put that Hemi into a 1998 Dodge Ram 1500 SLT Laramie with the dash from a challenger or charger (whichever fits) and steering wheel
There are people who builds custom split wheels from OEM wheels, you could probably sell wheels in a set like this with one that is beat up as long as the spokes are fine. It might not be the big money bringer but if you find someone that works with that, maby you could get some cooperation going that brings in a bit more money at least. Just a thought
I would love to put that motor in my old Oklahoma highway patrol cruiser #420 2013 charger pursuit. Would be a fun build but I could never afford a motor like that.
Hey Scraplife Garage know u saved alot of good parts from front end smashed new mint Dodge Charger Daytona but think wheels should be aswell & think engine would be perfect for someone gasser hot rod project.
I love these videos. Going through the value of the parts and the business side is so interesting.
Where is the video of the red cadillac car they picked up!!!! 😂😂😂 nice to see you here.
You have time to watch other videos now that the DeLorean is done?
I know! I can’t get enough of it! I buy cars, repair them, then sell them. I wish I had the room/ability to part them out, but rarely do. Sometimes I have to, if the roof or floor is too buckled. I won’t buy them with the intention to part them out, but I just recently had a Jeep wrangler Rubicon 392 that I had to part out. I ended up making a little over 12k in profit, but I was sweating it out for 3 weeks, worrying about it! I had it all figured out to make around 25k in profit once it was repaired, but as soon as it arrived, and I got a good look at the frame, I knew I was screwed. No fixing that one! LOL
No matter how much money scraplifegarage pays for these totalled POS's, it doesn't matter if they are restored and end up back on the road there value will always be WORTHLESS and will always carry the title as SALVAGE
so you still lose ScrapLifeGarage
@@lldjslim ok, and? You still unemployed and crying too much on a youtube comment section. Sometimes we restore cars not for the value but for the feeling it gives. Something non-car people like you wouldn’t understand.
I’d be interested in hearing some of the back stories behind these crashed autos you purchase 😮
once in a while the driver/owner will find their car on a youtube video and reveal how they came to be totaled, I believe the burnt out demon owner was identified but hasnt commented on SLG's videos
@mryoung0412 what's the dudes name?
@@jasonparker3316 on some of the original demon videos, they talked about him because he left an Instagram sticker on his car, but they blurred it out which I assume was to make sure the guy doesn't get harassed.
They also found illegal drugs in the trunk, so they reported him to the police and gave them the instagram handle.
The car was abandoned when it got caught on fire.
It typically involves Marines.
stolen / Ns
This has quickly became my absolute favorite channel.
i'm so invested in the manual demon
🎯 Key Takeaways for quick navigation:
00:00 🚗 *Introduction to the Salvage Auction Process*
- The video begins with an introduction to the salvage auction process for junk sports cars.
- The host explains his experience salvaging damaged vehicles and the potential for making money.
01:18 🏎️ *Examining the Damage to the Dodge Charger Hellcat Daytona*
- Detailed examination of the damage to the 2020 Dodge Charger Hellcat Daytona.
- Description of severe damage to the front end, driver-side engine bay, and rear quarter panel.
02:40 🧐 *Discovering Salvageable Parts in the Interior*
- Exploration of salvageable parts inside the damaged car's interior.
- Identification of valuable interior components like Daytona-specific features, fender flare, and more.
03:57 💰 *Assessing the Financial Potential of the Salvage Project*
- Discussion of the financial potential of the salvage project.
- Explanation of the non-reparable title status and the opportunity to buy the car at a low cost.
05:24 🛠️ *Inspecting Engine and Transmission*
- Inspection of the engine and transmission of the damaged car.
- Analysis of the engine's condition, noting potential issues due to the accident.
07:31 🧰 *Exploring the Trunk and Finding Surprises*
- Exploration of the car's trunk and discoveries inside.
- Mention of finding various items in the trunk, including a missing battery.
08:49 🚘 *Stripping the Exterior and Assessing Value*
- Discussion of the process of stripping the car's exterior.
- Assessment of the value of exterior parts, including doors, mirrors, and more.
10:04 🤔 *Evaluating the Interior Components*
- Evaluation of the salvageable interior components.
- Explanation of the value in parts like seats, carpet, carbon fiber trim, and steering wheel.
11:54 💲 *Identifying High-Value Parts and Their Pricing*
- Identification of high-value parts like carbon fiber trim and their OEM pricing.
- Discussion of the potential market for these expensive parts.
13:16 📊 *Clarifying the Decision to Strip Certain Parts*
- Explanation of why some parts were left in the car.
- Emphasis on the lack of value in generic components due to the car being a base model.
16:38 🚗 *Assessing the Condition of Wheels and Tires*
- Evaluation of the condition of the car's wheels and tires.
- Description of the damage to tires and the potential resale value of wheels.
18:00 🧬 *Checking Engine Oil and Preparing for Engine Removal*
- Checking the engine oil and preparing for the removal of the engine.
- Initial assessment of the engine's condition and anticipation of challenges in its removal.
19:08 🚗 *Overview of damaged parts and salvage potential,*
- Discussing the damage on various car parts.
- Mentioning aftermarket solutions for repair.
- Deciding to sell specific damaged components separately.
20:06 🚀 *Front end examination and surprises,*
- Examining the front end of the car after disassembly.
- Highlighting the survival of the intercooler pump.
- Noting some damage but overall better condition than expected.
21:28 🛠️ *Salvaging suspension and parts,*
- Discussing salvageable suspension components.
- Mentioning the importance of these parts in the market.
- Exploring the process of removing the rear end.
23:07 💪 *Evaluation of engine and related parts,*
- Inspecting engine-related components and potential damage.
- Discussing broken coil packs and other minor issues.
- Analyzing the overall condition of the engine.
26:47 📦 *Preparing for part sales and future plans,*
- Preparing the salvaged parts for sale.
- Mentioning the value of specific parts like seats and suspension.
- Teasing the potential projects for the salvaged engine.
28:57 📊 *Analyzing financial aspects and rankings,*
- Breaking down the financial aspects of the salvage.
- Discussing expenses, fees, and profit margins.
- Reflecting on the car's ranking in the Salvage Stories series.
Made with HARPA AI
Wow, talk about a useful AI application lol
Strange to do that…
Hellcats are the most wrecked cars now. Thanks for taking over Mustangs spot.
This is a factual statement
@@scraplifegaragewhat freight carrier and platform do you use to ship your freight items through? Been looking for awhile to find a good cheaper freight service to use
I love watching you pick a car apart. It does amaze me how much is just snapped together.
These cars are assembled in less than a day. Don’t be surprised
I love the color combo. That blue with the white stickers and brushed aluminum wheels works so good.
Would those be brushed aluminum or gunmetal? May look good with either honestly, tho white wheels could be cool too. Blue/green with white wheels is always a fun combo, very JDM or Rally esque, tho looks good on a muscle car too as does the gunmetal/aluminum!
I went out an bought a 2019 Challenger 3.6 plus. Only 50,450 miles mint. Inside an out. Paid $21,000. I bought it as a flip. I owned it only 3 months an put only 600 miles. I would like to put a Hellcat motor in it . What I heard it cost was to much. If it didn't cost that much I would love to..
I would like to know what dose it cost for a used motor like that. Year back I could change it over my self. Its hard to believe I'm in a wheelchair lost both my legs above the knees at my job in 1993. In 1998 start drag racing I had my NHRA LICENSE I was running 7.62@165. I am 60 years old now. I would have to pay someone to do it. It would be awesome!!
4900miles and he says there’s no reason the engine should be beat up. I can find a 100 videos that tell me otherwise 😂
The Daytona hellcat is very underrated. Especially knowing this car is also for track making it more interesting since most dodge cars are straight line kind of cars.
At 7:31 that corner light in the trunk is on with no battery 😮
Maybe a auxiliary battey?
the battery was stolen and missing yet that trunk light was on and lighted... how?? time stamp 7:38
My jaw literally dropped when you panned around to the passenger side of the car🤣 I wasn’t ready bro you really gotta warn a brother
Standing under a car on a teeny tiny forklift (or any forklift for that matter)? Super smart...
I'll be honest, I'd probably put that engine in a resto mod 68-70ish B body. Coronet, GTX, Roadrunner, Satellite, and of course a Charger. All great options. I know that's sacrilege to some people, but hey, at least I'd be keeping it mopar.
This owner is a Picasso within the car restoration industry. Unbelievable what he knows about these cars!!! Amazing!
Y’all need to take all the wiring out while you are in there you can get dumpster sized bin or something and then save it all up and sell it for copper scrap you don’t think it’s worth it but it all adds up over time and copper can be worth more than steel and that could pay payroll for quite sometime and maybe light bill or rent or even sell the harnesses
I’m from the Uk and I’ve been watching you guys for ages great channel 👌. I’d stick that engine in a 1970 MK1 ford fiesta van it would be a flying machine 👍
At the 7:30 mark in video , how is the light in trunk working if there is no battery ? Is there another battery or is a light reflecting off of it ?
They had a jump pack connected. They used the remote to pop the trunk @ 7:26. My guess. You can see it @ 8:54.
Damn, I love your videos! And the price breakdowns are incredible!
Love the fact that you get right into it, No wasting time ✊🔥 unlike some guys .
Go to dave.com/scrap and you could get up to $500 in 5 minutes or less when you download Dave! For terms, visit dave.com/legal.
I have been wanting to put a hellcat engine to put in a Dodge Journey shell
Id put it in my Dads 1978 firebird formula he got when he was 16 ! His dad passed & he used the money to buy his dream car once he turned 16 ! My dad passed in 2021 & now I have the car & it has no motor or trans ! But someday ima have a demon or Ls motor in it !!
@@scarrface.9102 that is a sick car to get going again, if I had to recommend a motor I would say the LS as parts are easier to find and you can get more HP out of them. plus it is very easy to get a LS going as it doesn't have the like 15 million sensors on it. just a recomendation
No matter how much money scaplifegarage pays for these totalled POS's, it doesn't matter ifvthey are reatored and end up back on the road there value will always be WORTHLESS and will always carry the title as SALVAGE
so you still lose ScrapeLifeGarage
Do you have body parts for an 03 Black C5 Z06?
You guys are good at what you do . Killing the game and making great content while doing it .
This is one of those rare videos where I couldn't wait to read the comments. But to be fair to myself, I watched the entire video first. Just finished with the comments and I didn't disappoint myself. That engine would have greatly enhanced my highly modified Chrysler 300C. Those brakes would have been the icing on the cake.
I bought those carbon parts oem for my rt on ebay a month apart each but daily scalping i got them both combined for 500 and sold for 800 when my scatpack came! They are sought after alot😊
He laughed and said I'm going to cord the tires in the demon in 500 miles 😂😂 I felt that 😂😂
Great video. It’s amazing to me how the wheels aren’t even scratched. Unless they were put on after lol
They have enough mopar shells now to look like a chop shop 😂
He owns a company that sells car parts.
@@SRT_DRE dawg ik lmfao, been watching for a few years. Just commenting on how many wrecked mopars they have had.
I work at a junk yard dismantling cars, as long as you have the k frame(sub frame) bolted up you show always be fine to drop transmission mount. Unless the K frame seems a bit sketchy
this just makes the other 500 copies of this car worth more
Wow it's kind of sad to see a Daytona that destroyed! I am wanting to buy a Mango Daytona but the dealer has such a high markup that it may not happen! If it doesn't happen I will probably buy a Bronco. Great profit margin on the Daytona! I am looking forward to the next video!
15:31 She'll balance out,, just run it as a back on the opposite side😂😂
one of the best channels for this kind of stuff💪🏾💪🏾💪🏾
Legit best car channel on here! Love you guys!
I love you guys videos. I have a question but I don’t know if y’all ever done it have y’all ever hellcats swapped a Challenger or a charger GT all wheel drive and still kept the all-wheel-drive.
I would put it in my 2004 Ram 1500.😂❤❤❤
i’m happy you’re a Mopar guy now bro and I agree with the interior materials are trash, but so is Chevy and Ford lol
love the content bro can’t wait to see the demon finished 🤙🏻
I really just fall in love with your channel keep going
I would put this engine in my 2005 Daytona RAM truck! Regular cab. Go Mango. Only 45k miles. Zero rust. It needs something to make it awesome . Keep the Daytona alive!
Great video didn’t know the hellcat Daytona was so rare
ive always wanted to put this engine in a mk1 fiesta as ive seen a v8 in one before but not with that much power tho are you ever going to give one away in a comp as im in uk but would love to enter
Will the brenbo brakes and rotors fit a 300 limited with a v6?
That paint is absolutely gorgeous!!!
Wow! For $19,000 bucks I could have gotten one heck of an N54 335i !!! LOL. Love the channel though! Rock on!
dang so 19k in and the engine already has offers plus the seats sold means the other 22k is profits once it all sells. thats a huge win.
Awsome video. Could you drop in in this old Army Vets 2010 challenger R/T lol...
I need the motor and trans for my Christine build...
Those just came out, already totaled??
How much for the Hellcat emblem is going for on the fender
0:48 I Can certainly Relate to that part.. Lls Mine was like that too.
It took about ten years of the new age chargers being out for me to finally like them lol. Geez the seat got bent but it looks like the driver walked away from a pretty hard wreck.
Got a Nissan Sentra ser spec v and a 2 door V6 Honda accord with a blown trans both would be sick to fab a hellcat motor in. Fast motor tiny car would be fun
Honeslty I find these episodes very interesting. I love seeing destroyed cars broken down some are gambles but those come up with huge profits sometimes. Love the videos keep it up, wish I had the money to try this but I don’t. Have y’all done any 350z or 370z salvage stories or auctions?
HAVENT WATCHED the full video but hell yea love to see a new one
as always good video
This is just a legal chop shop ... lmao... Great content bud, keep up the good work.
My pick to drop this engine into would be a 68 Charger, love the round taillights on the 68s. My 2nd choice would be a 71 Cuda.
Amazing the stuff you do keep it up man, love your videos!!!!!
i need the rear qtr panels where the widebody goes into place so if u could cut them out i will buy!!
I’m in Daytona and I get to see a fair bit. One of my fave.
So sad! This was a really GORGEOUS Hellcat Charger Daytona! Now there are even less of them, making the other 500 of them just that more “rare” and desirable! I’m not saying you should have tried to fix this one (With a “non-repairable” title, that bridge is burned) as I knew this one was done, even from 50 feet away! WOW! He/She must have been sore after this wreck!
You asked what we would do with this engine if we had it and I would totally put this in my 1968 Lincoln Continental. I think it would be an awesome Hell Cat Bagger. It would also make for some great content for my channel.
These are the best episodes, just not enough of them 😂
I'd love to do a trans plant in my Manual 2012 RT. I e seen them pretty cheap for a full drivetrain harness and computer
How much for the 2 quarters that say Dayton?? Would make awesome wall hangers
The headliner is alcantara, which is very expensive. It seems you didn’t get that
this channel is actually so good
I've got an 08 F250 crew cab long bed 6.4 truck with a blown up engine ( big surprise I know lol ) I've been planning on 12v swapping but a Hellcat engine would work!
Great channel, always look forward to the next one👍🏻
I actually thought you have gave him the finger for that "watch the paint" comment...lol..great content..sorry about the awful accident for that car
I would put that motor in my 1985 nissan 300zx... I wish I had the money and resources to do that it be the first ever... but what do you think about a project like that
Id like to purchase the wheels and wickerbill how do i go about buying them
I really want to put a hellcat engine in a e36 touring, love the cars they just need a little boost in power. Will swap mine one day
If I got a Hellcat engine, I would stick it in my Magnum. It's already debadged so keep it a sleeper.
Love all your videos. Keep up the good work. Love from Nigeria. 🇳🇬
I need that charger carbon radio cluster trim I don’t see it online :(
I am thinking dodge neon SRT4. converted to rwd. And a carbon fiber wide body kit. Would be a good project. For the engine and transmission.
Can you explain why you don't charge shipping separately on some of the bigger parts?
I love your videos.
I would love to put that motor into my 2010 Jeep Grand Cherokee 5.7 Hemi
Love the bloopers!
Happy to see the videos comig again.
It's toast dude! Just send me the engine and transmission to slap in my car 😂
Love watching your video's but how much cash do you get from scrapping the shell
Do be you have a website if someone was interested in buying some of these parts I'd be interested in the infotainment system and potentially the seats if they have the same features as my car
Let’s goo new upload 🎉
how much do you guys make a month on your scrap bin when scrap yard picks it up? that bin looked full
I just love the look of the Daytona hellcat
It brought a tear seeing a rare mopar trim being destroyed and if I had the funds to build a car I would put that Hemi into a 1998 Dodge Ram 1500 SLT Laramie with the dash from a challenger or charger (whichever fits) and steering wheel
I Bought a 09 CTS-V from Copart and fixed for myself...i used to part out snowmobiles and made some money would love to be able to do cars
There are people who builds custom split wheels from OEM wheels, you could probably sell wheels in a set like this with one that is beat up as long as the spokes are fine. It might not be the big money bringer but if you find someone that works with that, maby you could get some cooperation going that brings in a bit more money at least. Just a thought
I have a 1980 resto mod Toyota Corolla wagon I would love to put that Demon engine and trans in!
Why dont you cut out rear quarter oanels to sell fore someone to weld in? Is that not worth the hustle?
All hellcats came with 6 piston front calipers dooffuss 🤦♂️🤣🤣🤣
That’s what I was thinking. Maybe he mixed up scats and hellcats 🤷🏻♂️
I need some touchup done one some Brass Monkey wheels. Anyone have an recommendations? No rash, just a few chips here an there.
I would love to put that motor in my old Oklahoma highway patrol cruiser #420 2013 charger pursuit. Would be a fun build but I could never afford a motor like that.
one of my favorite guys on here,this stuff is really intresting,if i wasnt poor i would suport ya.
The driver's rear quarter panel still looks good . Somebody could cut paste weld that..
Hey Scraplife Garage know u saved alot of good parts from front end smashed new mint Dodge Charger Daytona but think wheels should be aswell & think engine would be perfect for someone gasser hot rod project.
Cool tear down!
Bro where do u go to get these salvage cars
How was the trunk light working with no battery?????