Thank you so much! I was sitting trying to fix my bearing for like half an hour, then I gave up and found your video. It only took me about 3 tries to get it fixed.
dude you're the best I was cleaning my bearings and one of them came completely apart. Thankfully I didn't lose the balls lol. I put it back together in like 2 tries. Thx so much
Thank you so much.This saved me . Got it on the second try but found it easier by folding a dish cloth up a few times which made getting the bearing into the half moon groove really easy. Cheers
Bro u helped me so much I was trying to make mine go faster and I did everything it said do and then when I was shaking it the balls had fell out I was there for about 50min then I found this vid u saved my life bro much love🤜
Thanks I have never done it before tonight and I sort of ended up doing the same thing but could only get 5 in but I got a broken thumb/hand so it’s hard for me to do right now lol
This was by far the most stressful and tedious task in my whole entire life to sum it up I bought some speed cream today then cleaned my bearings lubed them spun them thinking they were supposed to be fast off rip. They werent so I got pissed took all the shields off deep cleaned and dried everything and spent the past 3 hours trying to get the balls back in while losing shields dropping balls in the worst spots. Then once I finally got my first bearing partially fixed i spun them without putting the shield in and the balls flew everywhere and it was just as hard getting the balls in again then i dropped it in doo doo water which just made the whole think pointless and my whole week is ruined. Its hot and my back hurts im cooked ggs
i know it hasnt got anything to do with this video but i just came back to skateboarding and on one of my wheels i can see the tiny metal balls,the red part of the bearing came off.Is it dangerous to skate like that? Thanks in advance
WTF IS GOING ONN IM GETTING REALLY ANNOYED NOW IM JUST GOING TO THROW THESE IN THE BIN IDGAF CUZ THIS HAS GONE TO SH!T CUZ I TOOK OUT THE BALLS AND IVE LOST LIKE SOME SO I HAD TO GEG SOME OUT MY OTHER BEARINGS AND OF CORSE NOW MY LUCK NOW EVERY GOD DAMN TIME I TRY TO PUT THAT MIDDLE THING IN THE FUCKING BALLS JUST PING THE HELL OUT I E TRIED FOR HOURS IM GETTING SICK OF THIS I DONT KNOW HOW TO DO THIS LIKE WTF NOW IS THERE LIKE ANY WAY TO DO THIS I REALLY AM GETTING CROSS
Lol yeah I was trying to do it on a table but you should use a surface what can go down or is soft like a carpet or a towel cuz the bearings have to go in the grooves and it's now easy lol
bear Mitch i was trying for at least an hour to get the damn thing to work and in the video he "just" does it in like 5 seconds lol . Finally its back together and i am not taking it apart again.
I lost four balls I'm fucking screwed this is my friends bearings too. I was so pose to clean the but I fucked it up it does not work with only eight three balls
nvm, i figured out why, my bearings are tiny and didnt line up to the middle so i had to find a perfect sized ring thing to put underneath so it would line up, thanks heaps for the vid, sah dude
Thank you so much! I was sitting trying to fix my bearing for like half an hour, then I gave up and found your video. It only took me about 3 tries to get it fixed.
It's Just Ella glad I could help :)
😊😊☺️👍
Thank you, now I have to buy another bearing for my skateboard because I lost all the balls
Man, you saved my balls 😂 truly genius how simple it is ✌️
thanks bro helped me fix my fidget spinner
Prepping for Beginners no problem man
Prepping for Beginners Thx man for helping....
Idk it just happend than this vid saved my sanaty
Prepping for Beginners I know
dude you're the best I was cleaning my bearings and one of them came completely apart. Thankfully I didn't lose the balls lol. I put it back together in like 2 tries. Thx so much
Thank you so much.This saved me . Got it on the second try but found it easier by folding a dish cloth up a few times which made getting the bearing into the half moon groove really easy. Cheers
Dude thank you this really help. I was stuck finding out how to putting back the bearings in.
Thank you. Jiggle only outline circle part to fast finish. ❤
Wtf how did you get it so easily?! I've been trying for 3 hours
dang man I was trying for 2 hours now and I said u know what UA-cam knows more and ye it does
finally something that actually worked
holy shit, i have traveled far in youtube for a solution, and this method actually works, Thanks Frank Hamm
SushicCat55 no problem
This video has helped me many times over the years
I have no words to thank you man. You saved my sanity right now.
thanks dude, simple and straightforward solution
Divyanshu Jimmy thanks man
Bro u helped me so much I was trying to make mine go faster and I did everything it said do and then when I was shaking it the balls had fell out I was there for about 50min then I found this vid u saved my life bro much love🤜
Thanks man helped me with my fidget spinner
thanks bro now icould put my bearings ball👌
Great video. Spent days on it. Worked on my second watch of the video.
Where’s this mans peace prize 🙏 thanks so much the only video that worked
Thank you! I chose your video because the other were too long!! I was not disappointed! Thumbs up!
Thanks man it helped fix my old fidget spinner and now it roc
I love you you are my favorite UA-camrs
Tyyyy it worked just took a couple of shots
Thank you m8 even though it took me like 2 hours to fit all 7 balls in i got it 👍🏼👍🏼
Thanks man so much
Som Wakdikar no problem
Thanks a Ton Bro!You are a life saver!
THANK YOU SO MUCH
Beastmode 13 no prolem 😊
Thank you so much fixed my spinner
Thank you so much man, I thought I would never use my spinner again but I'm so happy thanks yo you. Thanks so much!!!!
thanks man. your a life saver
thabks this helped alot
Thanks I have never done it before tonight and I sort of ended up doing the same thing but could only get 5 in but I got a broken thumb/hand so it’s hard for me to do right now lol
it didn't work. I tried for an hour and a half and nothing. I am doing exactly what you are doing and nothing.
thx... A lot... finnaly after 2 hours, i ican fix it
This is exactly what I needed
This was by far the most stressful and tedious task in my whole entire life to sum it up I bought some speed cream today then cleaned my bearings lubed them spun them thinking they were supposed to be fast off rip. They werent so I got pissed took all the shields off deep cleaned and dried everything and spent the past 3 hours trying to get the balls back in while losing shields dropping balls in the worst spots. Then once I finally got my first bearing partially fixed i spun them without putting the shield in and the balls flew everywhere and it was just as hard getting the balls in again then i dropped it in doo doo water which just made the whole think pointless and my whole week is ruined. Its hot and my back hurts im cooked ggs
THANK YOU SO MUCH M8!...
Thank you
Great video. it actually helped
Your greatest achievement
i tryed this it worked
im gonna try it tommorow
thanks so much I needed to fix my spinner
thanks its working
thank you so much this helped alot im subbing!
thank God for you, thx
Thank you!
Thanks soooooooo much I thought my fidget spinner was screwed
Thanks so much bro really helped👌
Thank you thank you thank you thank you 😘😘😘😘😘😘
Thank u so much
It work really
Thank you. This helped a lot!.
My hero
Thanks man, that help me a lot!
thanks bro you very very very very very much nice n
omg you are a genious
Thanks bri
very useful for me... Thank alot!
Chai Ming Jin no problem!
thank you helped very much!
Works for fidget spinners to
bro my shake junt ones have a ball holder and the ball holder wont go back in
Love u bro
Nice
thank you so much God bless you
Thanks
I couldn't believe I just did it
Victims of curiosity assemble.
Thank u
i know it hasnt got anything to do with this video but i just came back to skateboarding and on one of my wheels i can see the tiny metal balls,the red part of the bearing came off.Is it dangerous to skate like that? Thanks in advance
It didn't work :/
WTF IS GOING ONN IM GETTING REALLY ANNOYED NOW IM JUST GOING TO THROW THESE IN THE BIN IDGAF CUZ THIS HAS GONE TO SH!T CUZ I TOOK OUT THE BALLS AND IVE LOST LIKE SOME SO I HAD TO GEG SOME OUT MY OTHER BEARINGS AND OF CORSE NOW MY LUCK NOW EVERY GOD DAMN TIME I TRY TO PUT THAT MIDDLE THING IN THE FUCKING BALLS JUST PING THE HELL OUT I E TRIED FOR HOURS IM GETTING SICK OF THIS I DONT KNOW HOW TO DO THIS LIKE WTF NOW IS THERE LIKE ANY WAY TO DO THIS I REALLY AM GETTING CROSS
bear Mitch did you do it eventually ?
Lol yeah I was trying to do it on a table but you should use a surface what can go down or is soft like a carpet or a towel cuz the bearings have to go in the grooves and it's now easy lol
bear Mitch i was trying for at least an hour to get the damn thing to work and in the video he "just" does it in like 5 seconds lol . Finally its back together and i am not taking it apart again.
You saved my ass lol thank you 😊
Dawson Vids no problem man
Keep it up man with the videos. 👍
Dawson Vids will do ☺
but it didn't fill up all space??
Suh dude like suuuhh dude 😂😂
I wanna know how to make the balls I lost mine...
thank folks
I did this to 3 bearings... I can't even get the ring in the middle. I'm going to buy new ones
ty. 1 down 7 to go...
ty
How the hell did it just go in like that???? I'm so confused
I figured it out it just took 2 hours because I'm stupid
I lost four balls I'm fucking screwed this is my friends bearings too. I was so pose to clean the but I fucked it up it does not work with only eight three balls
tq
I NEED HELP!! It FELL OUT FROM THE MIDDLE! WHAT DO I DO😭😭😭😭
Me who still can't get it together lmao
Like suh dude
Sa dude
the balls are annoyingly magnetic
thnk
Bro how tf 😡 I’m not able too get it I’ve tried so many ways this way that way just like fuck 😡
Easiest way
i lost two ball bearings doing this
Sahh Dudeee?
I CANT GET THE FUCKING BARING IN THE RIGHT WAY
didnt work
I CANT DO IT D::::
nvm, i figured out why, my bearings are tiny and didnt line up to the middle so i had to find a perfect sized ring thing to put underneath so it would line up, thanks heaps for the vid, sah dude
This ☝. Big thank you, bro!
I have done it in 3 tries😊😊☺️ but my kid destroyed again 😡😭
Really enjoy it. Let's check woodprix plans also.
This didn’t help but thx anyway lol