is there a way to hook them up to run as the DRL without any bulbs? i’ve searched everywhere and they say you have to code it using software but i see many videos of people hooking up to the fuse box and it ends up just with the angel eyes luminating. i just bought some halos for my mazda 6 and im trying to plan out how im gonna install them but i removed the DRL fuse in the fuse box because i don’t like the low beams on all the time
Next time don't start the engine put the key to accessories you don't need or want the rotary engine turning on and off for short periods you need to have it running at 3000rpm for at least 10seconds and the same when turning off you want to keep lubrication in the housings and you don't want access fuel incase of flooding when shutting down. Other than that good install hope whatever state your in they're legal? And yes do those steps please fir the sake of your engine I'm in Australia we have more rotaries than anywhere and the fastest in the world followed by New Zealand Japan and the Porto Rico
Yeah, I am well aware of what I need to do to keep my rotary healthy. I left the car on when I was putting the bumper back on and took it for a drive. I always make sure my oil temp gets to at least 150 degrees F before turning off my engine, and I ALWAYS hold it at 3000rpm for a couple seconds when I turn it off. I also check my oil everytime I get gas, I premix, and I do regular oil changes at 3000 miles. I can assure you that my rotary is well taken care of. Thanks for spreading this knowledge so we can continue to have rotaries on the road!
Just don't lose the remote or else you will be stuck with green like I am. BTW cops dont like the headlights. Got pulled over twice in a month. They were cool about it and didnt even give me a written warning. They just said technically it is breaking the laws so dont use it on the street.
I had 3 squad cars show up the first time I got pulled over they all wanted to check out the lights and they loved em. That was when I used the rainbow slow fade setting. The only color that is allowed is the purplish white color.
I hooked up the halos to the engine fuse with an add-a-fuse, so they would receive power only when the engine is running, so they could act as my daytime running lights.
Hahaha this makes it look like I came over just to play with things in your basement and drop a couple of really bad innuendoes
One questing bro Did you painted the black car or it was like that when you bought it ?!
Where did you buy it ? Can you link it please ? Thanks ;)
is there a way to hook them up to run as the DRL without any bulbs? i’ve searched everywhere and they say you have to code it using software but i see many videos of people hooking up to the fuse box and it ends up just with the angel eyes luminating. i just bought some halos for my mazda 6 and im trying to plan out how im gonna install them but i removed the DRL fuse in the fuse box because i don’t like the low beams on all the time
Awesome work man! Cant wait to see both of us progress!
Hey japanda can you post a link to get the halo kit
I have to release this demon. 5:12
crying rn :'D
You had to go through all this just to install angel eyes? Ouch!
Can you post a link of which ones you got on eBay?
Is it the same size to fit them on the series 2 headlights?
What wire did you use to extend the sensor to the inside of your car?
Begins every scene with "aight so..."
Yeah stop hating bro. NOT COOL.
Lol
Ian Terry 😂😂😂
Are the measurement of the halos on the inside or the outside?
Always be protected when going for the little slit
すごく勉強になりました!!! 僕もイカリング真似したいです!!! 今後もRX8のDIY頑張ってくださいね!!!
Yeah what this guy said
Can I use glue to hold the rings in place
Hey dude awesome job man,. Thanks for posting 😎
hey. could I get a link for the halos on eBay. thanks.
I got these: www.ebay.com/itm/221987201179?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
What was the wire used to tie down the halos?
which diameter had the HAlos you have installed?
What diameter have the stand-lights?
80mm
Have these held up over time?
Where did you buy them from?
Nice idea I’ll do this with few bits pained inside too
Where do you find the small ones
What glue or tape did you use to hold the rings up ?
if u watch the video, u would see that i used small wire not glue
You could have explained it at least the smallest amount haha, and you can see the wires from the headlight. Ugly.
Next time don't start the engine put the key to accessories you don't need or want the rotary engine turning on and off for short periods you need to have it running at 3000rpm for at least 10seconds and the same when turning off you want to keep lubrication in the housings and you don't want access fuel incase of flooding when shutting down. Other than that good install hope whatever state your in they're legal? And yes do those steps please fir the sake of your engine I'm in Australia we have more rotaries than anywhere and the fastest in the world followed by New Zealand Japan and the Porto Rico
Yeah, I am well aware of what I need to do to keep my rotary healthy. I left the car on when I was putting the bumper back on and took it for a drive. I always make sure my oil temp gets to at least 150 degrees F before turning off my engine, and I ALWAYS hold it at 3000rpm for a couple seconds when I turn it off. I also check my oil everytime I get gas, I premix, and I do regular oil changes at 3000 miles. I can assure you that my rotary is well taken care of. Thanks for spreading this knowledge so we can continue to have rotaries on the road!
Kareem Hassan don't rev it past 4K if it's cold. it's better if you can wait for it to warm up though and never turn it off cold.
Where did you get the body kit from
I got it all separately. Its just the front lip and rear wing, then duraflex side skirts I spray painted myself.
what's the size of those halo lights? i wanna get a pair for my rx8
80mm
I looking halos for my nissan .maxima 97 gxe you know what size i need it to buy .bro. nice job
I can't find those any where?
www.ebay.com/itm/221987201179?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Just don't lose the remote or else you will be stuck with green like I am. BTW cops dont like the headlights. Got pulled over twice in a month. They were cool about it and didnt even give me a written warning. They just said technically it is breaking the laws so dont use it on the street.
i only use them for special occasions
I had 3 squad cars show up the first time I got pulled over they all wanted to check out the lights and they loved em. That was when I used the rainbow slow fade setting. The only color that is allowed is the purplish white color.
Great work man
what size were they ? 70mm?
80mm
@@JapandaTuning is it 80mm inner circle or outer circle
Usually the guy that thinks he has to start the engine just to turn the lights on isn't this young.
I hooked up the halos to the engine fuse with an add-a-fuse, so they would receive power only when the engine is running, so they could act as my daytime running lights.
You don't have to start the engine lol. Just turn it to on (ac II) Off, acc, on (Acc II), start. Nonetheless though, nice install.
That's so funny I have the same air filter
This is legal ???
nice 🖒🖒🖒
У меня такие же стоят, смотрится круто
my computer has the same light controller lmao.
explain in fortnite terms
Aligator clips hahaha
Mumbling the whole time my GOSH
When ur bad at filming and everything is blurry