@@copyprint-fz2hb You have to remove the scanner lid and take out the screw in the top left-hand side of the hinge. Next remove the big plastic cover with the 3-step sticker on to expose part of the circuit board. You will see a white plug with 7 yellow wires directly under another screw. Undo that screw, and the entire power supply will unclip underneath. The fuse is located under the metal cover it is a ceramic 5amp 250v fuse with legs on.
I FOUND THE SOLUTION, AND IT IS REALLY FUNNY GUYS: I thought when I switched off my PC, it didn't matter; the printer would still be on, but it is not. Every time when you switch on your PC also You have to Switch on this god damn printer too. So press the power button 1.5 sec your Printer and open again. When you open, it starts working, and then you can print documents. So this printer switches off every time bear in mind.
Brother printer HL-L3210CW won't power up. Brother printer HL-L3210CW flashing Data light got stuck on constant. I unplugged it at the back of the printer, as cancel or power button had no effect. After this it wouldn't power up at all. I tried all the usual and recommended quick fixes but nothing worked. Left the printer unplugged for a week while I was on holiday and when I came back and plugged it in, it powered up as usual!! (Must've taken longer than a few minutes to clear out the printer's memory? Shorter than a week but no idea how long:-)
Method 5 : check fuse
do you know where the fuse is located ?
@@copyprint-fz2hb You have to remove the scanner lid and take out the screw in the top left-hand side of the hinge. Next remove the big plastic cover with the 3-step sticker on to expose part of the circuit board. You will see a white plug with 7 yellow wires directly under another screw. Undo that screw, and the entire power supply will unclip underneath. The fuse is located under the metal cover it is a ceramic 5amp 250v fuse with legs on.
@@mramusements Thank you
I FOUND THE SOLUTION, AND IT IS REALLY FUNNY GUYS: I thought when I switched off my PC, it didn't matter; the printer would still be on, but it is not.
Every time when you switch on your PC also You have to Switch on this god damn printer too. So press the power button 1.5 sec your Printer and open again.
When you open, it starts working, and then you can print documents. So this printer switches off every time bear in mind.
Brother printer HL-L3210CW won't power up.
Brother printer HL-L3210CW flashing Data light got stuck on constant. I unplugged it at the back of the printer, as cancel or power button had no effect. After this it wouldn't power up at all. I tried all the usual and recommended quick fixes but nothing worked. Left the printer unplugged for a week while I was on holiday and when I came back and plugged it in, it powered up as usual!! (Must've taken longer than a few minutes to clear out the printer's memory? Shorter than a week but no idea how long:-)
"Give the print system, to maintain the idle status."
Has this been translated from Russian?