Just got me a black 2002 Nissan Maxima SE and everybody thinks I’m crazy for putting a lot of money into the car but I didn’t care and man this made me even more motivated to keep building it even more, very nice!
Watching this makes me miss my 2000 Maxima. It had the stock 3.0 and a 5 speed manual. Engine had a cold air intake and that was it. That thing would do 130 easily in 4th gear on the freeway. Watching this video makes me see what my car could have become but the transmission went out and i decided to sell it
Dope build, love that blue on the 5th gens. Swapping over all my goodies from my 97 max to my 99 i30 now. Max was rotted out, same situation lol. I’m tuned in, #JerseyStrong💪
To fix the rear wheel wells just get a set of front fender and criss cross them to the back and cut them to the size you need and weld them on and add brackets etc after. The fender from the front driver side is the same shape as the door ach over the reap passenger wheel. It will save you on custom making metal to fit and better than bondo. Just make sure you rust proof if not raptor line the fuck out the radiator support it rust first and kills the strength structure first especially on the 01's. Right now I'm considering to turbo mine and I think the best bet is to use the 350/g35 right manifold to power the turbo off the front bank. Also running dual exhaust out the left and right sides of the bumper. love your work.
@@XxIcybluexX oh yes 100% that’s the best way to go. With the rust. Besides replacing the entire quarter on each side my new car is completely POR15 and under sealed this time lol not playing no games
Who did your steering wheel it looks cold. Just can't hear the last part. I'm getting a sense of jealousy like I need to know what you do. What do you do for a living?
I have on 02 Maxima 6sp SE and I'm about to do a build on it as the motor is starting to go. But it has a few mods and was a screamer before the motor started loosing compression
Keep the videos coming! Great information content! When you swapped the manual trans in did you run into "CHECK ENGINE" or any other electrical problems? I'm about ready to swap a 6 speed manual into my 05 Maxima.
No sir cuz my car from factory was already a 5 speed manual you will have a check engine light because your engine harness is from a automatic you would have to swap a manual transmission engine harness to eliminate the code
4DoorDave that’s the thing, Idk where to start. I don’t even think it’s worth it because it’s automatic and rusted. But it’s always fun working on a car that people sleep on.
Do the z seats swap directly over? Do you have to change the rail? I was thinking of changing my seats in my 04. Great content man. I just got a great deal on akebonos from a q50s and some base model z rims. I can’t wait to get them on lol
Yo I follow you on IG @jg.a33, nice to see this build progress. Really loved the progress of it. I also worked on my car in my driveway. Keep it up! 🔥🔥🔥💯
@@4DoorDave ya but even the vq35de on the g35 of 350z have a different style intake upper manifold no ? It looks so differe i love the look of the engine its weird
@@4DoorDave sick.. Makes good power just saw the dyno. I have a green 5 speed 122k. Can I get your input on an NA build? How tough would it be to take out my heads in my driveway?? Found a couple shops to port and polish. Was thinking manifold, heads, cams, h pipe exhuast ( need to mod bumper to fit). What do you think? Maybe a gain of like 50-60 hp?
Just got me a black 2002 Nissan Maxima SE and everybody thinks I’m crazy for putting a lot of money into the car but I didn’t care and man this made me even more motivated to keep building it even more, very nice!
Appreciate it man! They are fun cars when modded for sure
I love them in that blue, as well as with those 19s. I have been keeping my eyes open for a set.
ImChrisDuke traded a g37s bumper for my set haha! Around Christmas time
@@4DoorDave you got the better end of that deal
Watching this makes me miss my 2000 Maxima. It had the stock 3.0 and a 5 speed manual. Engine had a cold air intake and that was it. That thing would do 130 easily in 4th gear on the freeway. Watching this video makes me see what my car could have become but the transmission went out and i decided to sell it
I had a 4th gen and turboed it before youtube was a thing. Glad to see someone on the platform doing one of these man!!
Appreciate you man! Thank you!
Dope build, love that blue on the 5th gens. Swapping over all my goodies from my 97 max to my 99 i30 now. Max was rotted out, same situation lol. I’m tuned in, #JerseyStrong💪
jonathan algarin haha they getting harder and harder to find bro!
This is a very informative line of videos. I am about to get a maxima too so this taught me alot
Appreciate the love bro!! Glad you learned some things
Yoo I have a 01 20th anniversary edition I'm starting to build with my taxes. This shit right here gives me hopes.😍😍
Looking forward to the build!
Great cars until they started putting CVTs in them. I owned a 1996 se that was one of my all time favorite cars.
To fix the rear wheel wells just get a set of front fender and criss cross them to the back and cut them to the size you need and weld them on and add brackets etc after. The fender from the front driver side is the same shape as the door ach over the reap passenger wheel. It will save you on custom making metal to fit and better than bondo. Just make sure you rust proof if not raptor line the fuck out the radiator support it rust first and kills the strength structure first especially on the 01's. Right now I'm considering to turbo mine and I think the best bet is to use the 350/g35 right manifold to power the turbo off the front bank. Also running dual exhaust out the left and right sides of the bumper. love your work.
The old body wasn’t salvageable as the floor boards also had rust
@@4DoorDave I just mean if your faced with this problem in the future. I'm enjoying the video's. It's hard to find this car as the star of the vlogs.
@@XxIcybluexX oh yes 100% that’s the best way to go. With the rust. Besides replacing the entire quarter on each side my new car is completely POR15 and under sealed this time lol not playing no games
Who did your steering wheel it looks cold. Just can't hear the last part. I'm getting a sense of jealousy like I need to know what you do. What do you do for a living?
Had a burgundy ....one 6 speed....damm dope car
Yo I love these maxias! Makes me miss mine like crazy.
damn I now miss my 2002 Maxima 6-spd.
I currently drive an M340i with upgraded turbo, but every now and then I think about my 5.5 gen Maxima😔
i want a m340 sleeper bad ass car
@@4DoorDave yea man it really is
Nice build! Currently have an 02 maxima se base, 6 speed. Plans on hr heads and boost as well!
Just bought an 2002 sports edition for 500 bucks only needs front struts and paint fully loaded too
Sthside 700blk they usually always need paint lol. Did you get a 6speed or auto?
@@4DoorDave unfortunately it’s an auto
Let me start one of these cars, I'll start this one and then proceeds to walk all the way around the car😂🤣
I like them cars there pretty fast and we'll built if you ask me
Good bro new subscriber looking faword to the build nice buy💪💪💪💪
I have on 02 Maxima 6sp SE and I'm about to do a build on it as the motor is starting to go. But it has a few mods and was a screamer before the motor started loosing compression
Yeah man Great cars love em
i like it, this is different for me, sick build bruh!
Appreciate you bro!!!
Damn the old one is perfect. Just picked up a 02. Decided to run 19s based off ur video, what tire size u runnin? keep up the good work bro 🤘🏻
245-40-19 bro thank you bro
Nice
Gotta pull up on u one day ..Maxi Life
Pull up bro!
@@4DoorDave Where u located
I got a 2000 Maxima se right now outside, how would I slap a VQ35 in it from like an 03 or sum? or should I find a newer engine.
Jersey strong 💯
Facts
Keep the videos coming! Great information content! When you swapped the manual trans in did you run into "CHECK ENGINE" or any other electrical problems? I'm about ready to swap a 6 speed manual into my 05 Maxima.
No sir cuz my car from factory was already a 5 speed manual you will have a check engine light because your engine harness is from a automatic you would have to swap a manual transmission engine harness to eliminate the code
Nice Job bro, I Have a Nissan ser spec V 2006 and would like to swap It to vq35de but do It hr Heads 👍👍👍👍👍
rocco nacho that’s alottttttt of work !! But well welll wellllll worth it. It’s a lot of wiring involved
Nice!!! What year are those rims and from what car?
Gen 1 nismo 370z
@@4DoorDave Is there any alterations?
@@hectorsuarez853HOLLYWOODHECK just 245-40-19 all around bro. And 10mm spacers up front
@@4DoorDave Good looking out ... I love the 99 year body style. I think those rims would look sick.
Can’t see how you switched out headlamps from a 2000 to the 2002-3 they do t fit? Looks great
Yes they do fit plug and play with slight modifications to the wiring.
@@4DoorDave had no idea, they look very different, thanks
Bro I have a 2000 Nissan Maxima in Jersey, it would be a blessing if you help me tune it.
Dudley Cadet what are you tuning with
4DoorDave that’s the thing, Idk where to start. I don’t even think it’s worth it because it’s automatic and rusted. But it’s always fun working on a car that people sleep on.
Dudley Cadet yeah you should get rid of it for a manual. Automatics are slush boxes.
4DoorDave Facts, my next car will definitely be stick, but it’s still a fun car tbh
Do the z seats swap directly over? Do you have to change the rail? I was thinking of changing my seats in my 04. Great content man. I just got a great deal on akebonos from a q50s and some base model z rims. I can’t wait to get them on lol
A lot of custom work to get the Z seats to work
Killin' it! Subscribed. Can you send me a link for the morimoto harness?
www.theretrofitsource.com/9003-h4-morimoto-elite-HS-H4?quantity=1
This is what I have.. if you are using 2002-2003 lights
I have an 03 Nissan Maxima all black stock everything. Looking to start a building it up. Could I get the link to intake and front n back bumper.
The intake is custom there is no link for it, for the lip kit go to stillen.com
Can i supercharged my 2010 m35s I would love toooooo!
ky malone actually you can If you can modify a 370z or G37 blower kit to fit your motor.
Yo I follow you on IG @jg.a33, nice to see this build progress. Really loved the progress of it. I also worked on my car in my driveway. Keep it up! 🔥🔥🔥💯
Joc Garner thank you bro! The marathon continues! Man! Gonna do this next one right! 🔥
Thats a vq35de ? I cant recognize it with the engine cover off holy shit the intake manifold is different when the engine is placed transversly ?
It’s basically a 2Nd Gen VQ35DE. Has the plastic manifold and similar cylinder head design as the VQ35HR.
@@4DoorDave ya but even the vq35de on the g35 of 350z have a different style intake upper manifold no ? It looks so differe i love the look of the engine its weird
PPPPLLLLEEEEEAAAASSSSEE tell me what body kit that is I wanna try and fit it on my 02 Altima
Stillen they don’t make it for Altima
i have the gle maxima i cant find these ones in my country
I have a 2002 Nissan maxima just had it painted. I payed $6800 for in 2012 its 2023 I've got about $20,000 in it now.
Oh wow lol what you got done
You know if 350z seats fit on 06 altima
Yes but you have to modify the rails to make them work I used b14,b15 universal Sentra rails to get my Seats to bolt up
Where can I go to find a front bumper for my 2000 maxima?
dealership its cheap
I have a 2001 5speed what supercharger kit and how expensive is it ?
Have to find a used one buddy
Where u get the clear side makers at
eBay
What engine did you install and what year? 👋
2013 Altima engine with a maxima upper/ lower intake manifolds
6 speed mates to the 3.0? What was that swap like??
Need 6 speed axles
Trans
Flywheel with (3.0 signal plate for 3.0 ECU)
6 speed shift linkage
Shift cables
6 speed mount
Swap is easy for the most part
@@4DoorDave sick.. Makes good power just saw the dyno. I have a green 5 speed 122k. Can I get your input on an NA build? How tough would it be to take out my heads in my driveway?? Found a couple shops to port and polish. Was thinking manifold, heads, cams, h pipe exhuast ( need to mod bumper to fit). What do you think? Maybe a gain of like 50-60 hp?
@@BusyB07 3.0 is old
Reliable power useless to build it N/A they hold boost
I won't let it go.
front lip?
Stillen
Where did u get the gauge at?
eBay
What are those wheels ?
Nismo 370z Gen 1 bro
U got lucky if u haven't had any tranny issues
As long as car is under certain amount of torque it’s okay
I have a 2000 se an the max will go
What you mean?
I mean the Maximus will run they are fast
Did you have to roll and pull fenders for the NISMO wheels to fit?
10000% lmao
@@4DoorDave appreciate the response was looking to do the same setup
What are the wheel specs bro ???
19x9.5 front +40
19x10.5 rear +23
@@4DoorDave thanks broo
Did you junk it?
Yea old
Shell is junked
@@4DoorDave damn, thanks man hope the swap went well for you
@@rangewarden6838 indeed it did check the other vids lol
@@4DoorDave will do 🤙🏼
Dave wanna help me with my Car???
What car you get
@@4DoorDave 03 Maxima Titanium Edition SE
places584 I didn’t even see you responded my bad what did you need help with
@@4DoorDave everything bro, the car is stock except for a short ram intake that was installed
What are your goals for the car bro
That stance is mean
My two sons want imthe car but I won't give to them 😅
Lol keep it
What radio is that
pshhhhh some old pioneer i forget