@@SpankysHotRodsandCustoms Hello Spanky, it’s getting there hopefully it will be a fun car you can jump in and just cruise with no worries and even sit on the fenders LOL. Thank you as always and have an awesome thanksgiving 👍🏼AL
Happy Thanksgiving to you also Al! How old were you when you did your first full quarter panel and inner structure replacement, and how did it go? I'm sure it took a little longer than it does now.
@@RayJohnson-ds8hx Hello, it was part of an old rocker panel that I bent up to fit. It actually worked out ok. Thank you for watching. Have a great thanksgiving 👍🏼AL
Hey Al, can you show us how to roll the bottom of the door? My Camaro has the exact same issue. I don't want to mess with the alignment on the door because the front matches but the bottom of the rear comes out just a little bit. Can you tell us what the proper way to do it is?
@@frankc1430 hello, I cheat a little bit with this type of car especially when the paint is no good. If you’re careful you can usually roll the door a bit without damaging anything. If that doesn’t work you usually have to adjust it by the front hinges. I will show how I cheat and see if that might work for you. Thank you very much for watching. Have a great weekend 👍🏼AL
Great job Al on the quarter panel it's way better and easier to use a full quarter panel I use a quarter panel skin on the lovebird brother let me tell you something it fought me all the way to the end and I didn't overlap weld anything I butt weld the quarter skin on if I didn't have the experience that I have in the metal work I don't know how I would have done it keep it going the Camaro is coming back around looking good 👍
@@firstgenerationgarage2803 Hello Louie, yes I’ve been there and it can really take the fun out of it LOL. I have to say I really enjoy taking a car people give up on and making them just a fun worry free ride they can enjoy and even sit on the fenders LOL. Have a great thanksgiving 👍🏼AL
I thought you had replacement quarter panels on each side that you were test fitting that didn't have the full sail on it? What happened to those to where you had to cut up the panels with the full sail?
@@TheRealRyan68 Hello, the original quarters I was going to use didn’t have the door jamb that went onto the rocker. I do have those pieces but felt this was the better way to go. I can use the ones I test fit on the blue Camaro. Have a great thanksgiving 👍🏼AL
Do you blast the rust underneath, or just treat it? Watching you, I really miss fab work, I used to really enjoy doing that. Be glad you’re working on a Chevy, on the Oldsmobile, you cannot buy full quarters for the S model, just the convertible, and most 442’s are the S model. I don’t even want to tell you what a set of take off quarters from 1972 cost me when I was restoring my W-30, and I had to drive to Chicago to buy them. Happy Thanksgiving to you and your family.
@@Musclecar1972 Hello, I’m going to take it all apart and I will clean up the rust and then por 15 it so it should last a long time. Thank you for sharing your experience on what it takes to restore an Oldsmobile. Thank you for watching and have an awesome thanksgiving 👍🏼AL
@@66427 Hello, I have painted some cars but find I can get them done a lot faster if I send them out to Joe for paint. I might paint the blue one on the lift if I have time. I’m also going to start on the mustang at the same time so let’s see how that goes LOL. Thank you for watching. Have an awesome thanksgiving 👍🏼AL
Hi AL it really looks like YOU DONE THIS BEFORE !!!! Ha Ha Ha … You have a very enjoying THANKSGIVING buddy and all your family to AL.. Say hi to your son for me AL he’s a great helper .. ENOUGH BABBLING…. YOUR FRIEND BOB !
@@spungebob24 Hello Bob. Funny every time I do this it’s like here we go again LOL. As soon as scraps is done my son and I are going to start on the blue 69 camaro and the 66 mustang so this should be fun I hope. Thank you as always and have a great thanksgiving 👍🏼AL
@@christopherohara9421 LOL I know. I just try to keep them fun and affordable you can even sit on the fenders. Thank you as always and have a great thanksgiving 👍🏼AL
Thank you, the same for you.👍👋☕️💯🇵🇷🏝
@@antinioacosta2710 Thank you for watching. Have an awesome thanksgiving 👍🏼AL
@keepitsimplegarage-xp1kk 🙏👍👋☕️
Very nice work Al, ol Scraps is getting the love it deserves. Have a great Turkey day!
@@ClintPosey Thank you very much. Have a great thanksgiving 👍🏼AL
Look forward to each video he makes it all look easy
@@peterkauffmann6800 Hello, thank you very much for watching. Have a great thanksgiving 👍🏼AL
I love how fearless you are. Experience is showing. Great video. Happy Thanksgiving.
@@jeff4air985 Well I don’t know about that LOL. Thank you very much. Have an awesome thanksgiving 👍🏼AL
Al, thanks so much for making another great video. GODBLESS..
@@Novarider72 Hello, thank you very much for watching. Have an awesome thanksgiving 👍🏼AL
Hey Al , its nice to see u and your son working on old cars . Thats something l never had ,just wanted to say thank u for being on good dad !!
For being a good dad !! God bless...
@@Novarider72 Thank you very much and have a great thanksgiving 👍🏼AL
That other Quarter Panel fits great Al on Scraps it's Really Going Together Nice 👍 Have a Great Thanksgiving 🦃👍
@@tonywoods3197 I was surprised with how it didn’t fight LOL. Thank you very much for watching. Have a great thanksgiving 👍🏼AL
Great job Al, love seeing everything coming together. You and your family have a wonderful Thanksgiving be safe..
@@ronmurphy4855 Thank you very much! Have an awesome thanksgiving 👍🏼AL
Doors close nice Al. Another good job my friend 👍🏾
@@paulhammond3488onetime Thank you very much. Have a great thanksgiving 👍🏼AL
Awesome job with those quarters Al! Glad you’re feeling better. Hope you and your family have a great thanksgiving!
@@Lionel_Hutz1098 Thank you very much. Have an awesome thanksgiving 👍🏼AL
You have a great Thanksgiving also, really enjoy your videos.
@@jerrysands4662 Thank you very much for watching. Have a great thanksgiving 👍🏼AL
Nice job Al, you are fast and getting it done.
@@SpankysHotRodsandCustoms Hello Spanky, it’s getting there hopefully it will be a fun car you can jump in and just cruise with no worries and even sit on the fenders LOL. Thank you as always and have an awesome thanksgiving 👍🏼AL
Happy Thanksgiving Al, get those second helpings for sure!
@@burny86-j5z I will be going for seconds LOL. Thank you very much and have an awesome thanksgiving 👍🏼AL
AL i do believe that car was originally Kelly Green is it the Factory paint still on it ?
@@zcam1969 Hello it still has some original paint and I think it’s rally green but I’m not sure. I will definitely check it out to make sure 👍🏼AL
best to you and yours Al. Happy Thanksgiving.
@@70ss454_elco Thank you very much! Have an awesome thanksgiving 👍🏼AL
Some nice work Bud 👍 and Man hope you and family have a great Thanksgiving ✌️
@@lonniekiser3612 Hello, thank you very much. Have an awesome thanksgiving 👍🏼AL
AL you are actually pretty good at lining up those doors and quarter panels .. i'm jealous ..lol
@@zcam1969 it usually takes a lot of time but these went right on with really no aligning so we got lucky LOL. Have a great thanksgiving 👍🏼AL
Happy Thanksgiving to you also Al! How old were you when you did your first full quarter panel and inner structure replacement, and how did it go? I'm sure it took a little longer than it does now.
Nice work on the passenger quarter panel Al, you make it look so easy, you really do!! Have a great Thanksgiving with your family, enjoy!!
@@chuckypaonita7974 Hello, thank you as always for your kind comments. They really are so doable. Have an awesome thanksgiving 👍🏼AL
Happy Thanksgiving Al n all you gear heads!
@@sprintcarsandguitars959 Hello, thank you very much! Have an awesome thanksgiving 👍🏼AL
It’s nice to watch a craftsmen at work, your sill path panel ? Was it scrap metal from your driver side 1/4 panel
@@RayJohnson-ds8hx Hello, it was part of an old rocker panel that I bent up to fit. It actually worked out ok. Thank you for watching. Have a great thanksgiving 👍🏼AL
Nice work, Al.
Thanksgiving dinner should fatten you up a bit lol.
Enjoy the Holiday, & stay safe!
@@TruessRod Hopefully I can put on a few pounds LOL. Thank you for watching and have an awesome thanksgiving 👍🏼AL
Hey Al, can you show us how to roll the bottom of the door? My Camaro has the exact same issue. I don't want to mess with the alignment on the door because the front matches but the bottom of the rear comes out just a little bit. Can you tell us what the proper way to do it is?
@@frankc1430 hello, I cheat a little bit with this type of car especially when the paint is no good. If you’re careful you can usually roll the door a bit without damaging anything. If that doesn’t work you usually have to adjust it by the front hinges. I will show how I cheat and see if that might work for you. Thank you very much for watching. Have a great weekend 👍🏼AL
Bonus…. Passenger side quarter panel! Keep up the good work!
@@pbush5440 The quarter panels were my road block but they didn’t fight at all. Thank you for watching and have an awesome thanksgiving 👍🏼AL
Yep that one has little bit rust. Turning out nicely so far though Al.
@@VinoRatRodbuilds Hello Robert, yes it definitely has some rust. Thank you as always and have an awesome thanksgiving 👍🏼AL
Great job Al on the quarter panel it's way better and easier to use a full quarter panel I use a quarter panel skin on the lovebird brother let me tell you something it fought me all the way to the end and I didn't overlap weld anything I butt weld the quarter skin on if I didn't have the experience that I have in the metal work I don't know how I would have done it keep it going the Camaro is coming back around looking good 👍
@@firstgenerationgarage2803 Hello Louie, yes I’ve been there and it can really take the fun out of it LOL. I have to say I really enjoy taking a car people give up on and making them just a fun worry free ride they can enjoy and even sit on the fenders LOL. Have a great thanksgiving 👍🏼AL
@keepitsimplegarage-xp1kk I Agreed 100% making the car safe again to drive enjoy your Thanksgiving also my first generation f-body brother
I thought you had replacement quarter panels on each side that you were test fitting that didn't have the full sail on it? What happened to those to where you had to cut up the panels with the full sail?
@@TheRealRyan68 Hello, the original quarters I was going to use didn’t have the door jamb that went onto the rocker. I do have those pieces but felt this was the better way to go. I can use the ones I test fit on the blue Camaro. Have a great thanksgiving 👍🏼AL
Awe yes, thats right. now I understand. Great content! Enjoy the Camaro projects, look forward to project "ol blue". Have a great Thanksgiving aswell!
@ Hello, I hope you had a great thanksgiving. I should be stood the blue 69 and the mustang very soon. Thank you and have a great weekend 👍🏼AL
Do you blast the rust underneath, or just treat it? Watching you, I really miss fab work, I used to really enjoy doing that. Be glad you’re working on a Chevy, on the Oldsmobile, you cannot buy full quarters for the S model, just the convertible, and most 442’s are the S model. I don’t even want to tell you what a set of take off quarters from 1972 cost me when I was restoring my W-30, and I had to drive to Chicago to buy them. Happy Thanksgiving to you and your family.
@@Musclecar1972 Hello, I’m going to take it all apart and I will clean up the rust and then por 15 it so it should last a long time. Thank you for sharing your experience on what it takes to restore an Oldsmobile. Thank you for watching and have an awesome thanksgiving 👍🏼AL
Quarters are finally coming off the wall.
@@69bjgmopar Yes they had to go LOL. Have an awesome thanksgiving 👍🏼AL
Al, you spray your own cars,,when you do a complete restore
@@66427 Hello, I have painted some cars but find I can get them done a lot faster if I send them out to Joe for paint. I might paint the blue one on the lift if I have time. I’m also going to start on the mustang at the same time so let’s see how that goes LOL. Thank you for watching. Have an awesome thanksgiving 👍🏼AL
Happy Thanksgiving
@@heathvice8365 Thank you very much! Have an awesome thanksgiving 👍🏼AL
Hi AL it really looks like YOU DONE THIS BEFORE !!!! Ha Ha Ha … You have a very enjoying THANKSGIVING buddy and all your family to AL.. Say hi to your son for me AL he’s a great helper .. ENOUGH BABBLING…. YOUR FRIEND BOB !
@@spungebob24 Hello Bob. Funny every time I do this it’s like here we go again LOL. As soon as scraps is done my son and I are going to start on the blue 69 camaro and the 66 mustang so this should be fun I hope. Thank you as always and have a great thanksgiving 👍🏼AL
Now it's getting fun if I could only convince you patina on a 69 Camaro I liken to a blasphemer
@@christopherohara9421 LOL I know. I just try to keep them fun and affordable you can even sit on the fenders. Thank you as always and have a great thanksgiving 👍🏼AL
@keepitsimplegarage-xp1kk I had mint 69s SS RS and RS now I find them out of reach have to settle on a 79 anyway happy thanksgiving
@ They’re one of my favorite cars. Thank you as always and have a great thanksgiving 👍🏼AL
Looking good Al. Check your email. 😊
@@carlockert2214 LOL yes I did and I’m so excited for you. Keep me posted. Happy thanksgiving 👍🏼AL