2004 mitsubishi endeavor transmission gasket & fluid change
Вставка
- Опубліковано 21 сер 2024
- In this video u will be watching of how to remove a vertical transmission pan for 04 mitsubishi endeavor ..using a mini ratchet will be the big key in removing it bec it will save u a lot of time
Finally! Someone who shows people with automatic 3.0 Mitsubishi engines where the transmission plug is.
People with 2.4 Mitsubishi engines keep saying "You should find your drain plug on the side wall of the transmission."☺️
thank you
What is the purpose of removing the transmission gasket if there is no leaks and you can drain the transmission fluid removing only the bottom bolt ?
Same question here
@@MrK3lvinrecinos same question?
@@MrK3lvinrecinos Not to mention, why disconnect the battery? Why take all the stuff off the engine? Yea, if you can't change the filter why take the stupid pan off? Much of this video makes no sense at all
To change the transmission filter, it's inside the pan
The stealership, buried the filter deep in the transmission, you have to take the valve block and Soliods off to get to it. Stupid design.
Wow man this is crazy they have to make everything so hard to work on I have a 2004 Mitsubishi Endeavor sitting on my lawn for over a year now transmission issue I wonder if this could be the problem I guess I'm just going to have to change my transmission
Was your car jerking and did fix the problem by doing a flush
@@alexcano5163 yeah my car is doing the same. Right around 2000 rpm at 35 mph. Did you ever fix yours?
@@alexcano5163 thx. Bro mine shakes randomly I know it’s the transmission. If I opened the pan and changed filter you said it works? Pls let me know
@@fifamatches1058 did you fix yours? after changing CV Axle on both sides my mechanic said it's the transmission.
@@Therealpeter961 mine too please message me if you have any information. My mechanic changed one side then told me the transmission was bad.
thank you
You're welcome
Rhashwin bro i got a question im changing my oil pan for my mitsubishi lancer 2004. Because i broke my drain plug for some reason im changing oil last sunday. Now its started leaking oil..My question is how long should i wait to dry the sealant before putting new oil? And should i put the sealant first before putting the gasket then sealant again? let me know the steps...This is my first time to to DIY this oil pan and gasket replacement. I want to save money because our mechanix charging me $275.00 the parts is only cost me $70.00 i m gonna save $200.00. I came to your site coz your my KABAYAN!! :) Thanks for the immediate reply...
if the gasket is rubber no need for sealant just make sure to sand the pan with 500 grit sandpaper and make sure its dry then u can put oil right away but make sure u torque it right with sequence but if the gasket is paper side by side put sealant its better to leave the pan overnight before putting oil just make sure torque it right with sequence
@@asianmechanicguy6483 Thanks bro so after to put he sealant just put it back and torque it right? salamat mabuhay ka!!
@@lethalchaos19 oo bro torque mo ng specification nya halimbawa 30 ft lbs gawin mong 33 lagpas ng kunting kunti tapos umpisa kang magpahigpit from inside or center to outside
While changing filter in 2004 Mitsubishi Endeavor, about one and a half to 2 inch pieces of metal in the filter. What are the
then ur tranny is done its too late
I did the same mistake too and to find out you cannot replace trans. filter😅
same here
@the asian mechanic guy. Ask ko lng po if paano po linisin. Un filter jan pag tanggal ng pan? Hndi po kc naipakita kung paano eh.. Or may need pa tanggalin? Or sprayan na mismo un filter? Thanks
bro hindi mo malilinisan or mapapalitan umg fliter nito kc nasa loob
Ah ok salamat sa info. The best ka po tlaga very helpful mga video mo,kaya napa subscribe tuloy ako para masubaybayan ko pa mga upcoming video mo... Salamat ng marami ulit...
Why is it not possible to change the filter? Thanks
@@asianmechanicguy6483 Thank you for the explanation. I'll just change the fluid and move on.
I want know too
I have an 04 and wow wonderful SUV so many luxury features love it. However, I have the strangest problem. Previous owner had transmission rebuilt recently. It shifts super smooth and totally normal but when accelerating it makes a loud whirling turbine sound. Sounds like an airplane taking off. The faster the car goes the louder it is until about 90 mph then it goes away. I assume that's when it goes into overdrive. Fluid is good. Transfer case oil and differential oil is good. Any idea what this can be ?
the best thing you have to do is scan the car that way you will be having an idea whats going on with the car its sounds like it has a tranny issue from what u said
@@asianmechanicguy6483 I hooked up my OBD to it no codes come up. Im thinking maybe a clogged filter but I know that's not accessible without major disassembling. I've worked on numerous cars quite a bit but have never seen this before. I had some mechanics drive it. They also don't know. With time I'll see if it gets worse then take it from there. Thanks for the info. Good video.
Armando Rios, it's your wheel bearings that are making that noise. It's hard to say which one: front, rear, left or right. I've had 2 Endeavors: one a 2006 2wd and a 2011 SE awd and I had the same problem with both of them. On the 2006 I replaced both fronts and a few months later the rears went out. On the 2011 one of the rears started to go so I just replaced all 4 at the same time and called it a day. I still have the 2011, runs like a champ.
hey can you do me a solid and give me a ball park of how much fluid came out and how much i should put back in?!! thanks
sorry this video is been a while but mostly for this king of transmission repair i always start at 4 quarts or 4 liters then ill check the dipstick it should be on between cool and warm then ill start the car for 5 mins or more check the dispstick it should be on warm level if its low then ill add more..
I have a vertical pan on my 06 Lancer and I can not get it off. We got all the bolts off and got it loose but we can’t get it past the metal box inside. Any tils
get a small pry bar and slowly pry it at the 4 corner one at a time
Don’t bother, you can’t get to the filter. Just drain and refill.
How can I change the transmission filter on my endeavor? lasts clean only 6 months
any update , do you change it ?
To be able to teach you really need to talk!
this is my first videos and still learning how to be utuber hat time watch my recent videos i talka lot
Que transmisión trae
Where do you add the fluid?
Through the transmission dipstick above.
Why can't u change the filter for this
filter is inside the transmission u need to tear dowm ur tranny from what i know
So annoying I've got the galant gts and had to look at this video
NEVER AGAIN I WILL BUY A MITSUBISHI...... THEY SELL YOU THE FLUID AND FILTER... YOU CAN NOT CHANGE THE FILTER.... WTF
Mute video? Don't be shy talk
watch my recent videos a talk a lot my freind