Great video! Gives me the confidence to do this part myself. I did my Silverado bumper which was more complicated. My question however is how do you deal with the parking sensors? Are they not attached to the bumper? That's the part that had concerned me.
This helped big time, I have to take off the Bumper, good, and side frame and Add a new power steering can, new anti freeze, new head lights, new fog lights, new coolant tank, new windshield fluid tank
Thanks for the Video! Forgive me for butting in, I am interested in your initial thoughts. Have you heard about - Parlandealey Vanish Ringworm Process (should be on google have a look)? It is a good one of a kind guide for revealing how to repair your vehicle minus the hard work. Ive heard some awesome things about it and my cooworker after many years got cool success with it.
No sorry i don't. there are bolts on the top of the fender under hood, at the bottom of the rea of the fender and at the rear edge of the fender inside the door jamb. then bolts that are under the bumper that attach the fender to the body. thanks for the comment hope this helps
...lol...kinda knew what I was doing but not really...yeah doesn't make any since does it...anyway thanks, your video very helpful had to replace fog lamps and only way I could figure was to remove bumper , not so bad after all 👍
I have a question if anybody can help me out.. I have a 2007 Lexus es350 and want to change the front bumper to the 2010-2012 front bumper.. Now I know the bumpers and lights are different from 2007-2009 and 2010-2012.. my question is if I change the lights to the 2012 will the bumper fit my 2007 than?
Great video! I had one of my Lexus Es 350 Parking sensors fail. Driver side front bumper. Lexus dealership wants $600 just to replace it. I can buy 5 brand new OEM parking sensors for $50 on ebay so wondering if it would be easy to just use your video and remove front bumper and replace the bad sensor? What is the name of that tool you used to pop off clips>? didn't see a description in your parts section. Thanks again!
That clip removal tool I pick up at harbor freight i believe. They have kits on amazon that are inexpensive. You can pick one up at your local auto parts store as well. You can definitely do it yourself and save some cash! Thanks for the comment!
Sorry to bother, maybe you can help me. I have an 08 lexus es350 that I'm rebuilding. So the manual says that h7 bulbs are the right ones for the car low beam. But the pins of the bulb are not wide enough to connect into the connector coming from the car. I feel like I'm missing a part between the conector of the car and the bulb(as they sell it). It's there an adapter or socket where the bulb snaps in and then connects to the car plug? Can you help me out please. I got the car without any headlights and bulbs, just a bunch of connectors hanging down. Thanks in advance ☺
No bother at all. Unfortunately i don't really have an answer for you. I have seen adapters that go between harnesses and bulbs. My advice would be to contact the dealer and a tech may be able to answer that question. Some models also have hid headlights and some don't it may have something to do with that. Good luck!
That car was available with two headlight options .base model halogen .or HID. Check with a shop that specializes in aftermarket installation of stereos remote starters HID lights and so on or contact a body shop my 07 es has the HID headlight option. Hope this helps daniel.
Thanks for help bro!!
No problem 👍
Great video! Gives me the confidence to do this part myself. I did my Silverado bumper which was more complicated. My question however is how do you deal with the parking sensors? Are they not attached to the bumper? That's the part that had concerned me.
This helped big time, I have to take off the Bumper, good, and side frame and Add a new power steering can, new anti freeze, new head lights, new fog lights, new coolant tank, new windshield fluid tank
You shouldn't have any problem doing that! # yougotthis #makinnoise thanks for the sub and comment!
Thanks for the Video! Forgive me for butting in, I am interested in your initial thoughts. Have you heard about - Parlandealey Vanish Ringworm Process (should be on google have a look)? It is a good one of a kind guide for revealing how to repair your vehicle minus the hard work. Ive heard some awesome things about it and my cooworker after many years got cool success with it.
Nice. But easier to take driver wheel liner off to put back on 10mm bolt going up fender, for reinstall
Yes, you are right
Good video, Thanks
Nice thanks
👊
Thank you so much for your presentation
You are most welcome
Do you have a video removing the rear bumper cover ??? Thanks for the video.
no i don't sorry but i do for some other vehicles and although it is not the same it will be very similar.
I don’t see the link in the description, do you still have the link to the new bumper
You are the absolute greatest! Thank you so much!
Your so welcome! Happy to help.
What is the tool called that looks like a 2 prong fork to pop off clip ons?
It's called a trim removal tool . It can be purchased on Amazon or your local auto parts store. Thanks for commenting.
Do you have a video for the fender
No sorry i don't. there are bolts on the top of the fender under hood, at the bottom of the rea of the fender and at the rear edge of the fender inside the door jamb. then bolts that are under the bumper that attach the fender to the body. thanks for the comment hope this helps
Do you have a video on how to remove 2000 Lexus ES300 front bumper and hood.
No, sorry i don't have a video for that. Thanks for the comment it will be similar to the removal in this video
...lol...kinda knew what I was doing but not really...yeah doesn't make any since does it...anyway thanks, your video very helpful had to replace fog lamps and only way I could figure was to remove bumper , not so bad after all 👍
Thanks for the comment , no it's not bad at all.
The plastic piece under the bumper is the splash shield
not the engine cover.
Most of the time i call it a thingamajig! Lol
What holds the 7 10mm bolts into the bottom. Mine are missing
Not sure brother.
Are you sure they're bolts and not those black plastic pop out retainers?
@@keepingup2952 you were right
I have a question if anybody can help me out.. I have a 2007 Lexus es350 and want to change the front bumper to the 2010-2012 front bumper.. Now I know the bumpers and lights are different from 2007-2009 and 2010-2012.. my question is if I change the lights to the 2012 will the bumper fit my 2007 than?
I'm looking to buy a used bumper how can u help me
Available online
Great video! I had one of my Lexus Es 350 Parking sensors fail. Driver side front bumper. Lexus dealership wants $600 just to replace it. I can buy 5 brand new OEM parking sensors for $50 on ebay so wondering if it would be easy to just use your video and remove front bumper and replace the bad sensor? What is the name of that tool you used to pop off clips>? didn't see a description in your parts section. Thanks again!
That clip removal tool I pick up at harbor freight i believe. They have kits on amazon that are inexpensive. You can pick one up at your local auto parts store as well. You can definitely do it yourself and save some cash! Thanks for the comment!
It's a 2007-09 to answer your question about what year.
👍
Sorry to bother, maybe you can help me.
I have an 08 lexus es350 that I'm rebuilding.
So the manual says that h7 bulbs are the right ones for the car low beam.
But the pins of the bulb are not wide enough to connect into the connector coming from the car.
I feel like I'm missing a part between the conector of the car and the bulb(as they sell it). It's there an adapter or socket where the bulb snaps in and then connects to the car plug?
Can you help me out please.
I got the car without any headlights and bulbs, just a bunch of connectors hanging down.
Thanks in advance ☺
No bother at all. Unfortunately i don't really have an answer for you. I have seen adapters that go between harnesses and bulbs. My advice would be to contact the dealer and a tech may be able to answer that question. Some models also have hid headlights and some don't it may have something to do with that. Good luck!
That car was available with two headlight options .base model halogen .or HID. Check with a shop that specializes in aftermarket installation of stereos remote starters HID lights and so on or
contact a body shop my 07 es has the HID headlight option. Hope
this helps daniel.
👍👍👍👍👍🙏
Let's just not mention what year car this is,
Dude. Clearly a 07-12 they have the same body panels for the most part
🤔