EzGo Rear End lift kit install

Поділитися
Вставка
  • Опубліковано 29 сер 2024
  • Part 2 of the lift kit install onto the EzGo txt golf cart. EBAY LINK, rover.ebay.com...

КОМЕНТАРІ • 32

  • @robertclark2714
    @robertclark2714 Рік тому +1

    We bought a golf cart on Craigslist and the stock tires just slide and spin in mud. We bought All Terrain tires and of course it needed a lift. Thanks for your good instructions.

  • @bamaguy50
    @bamaguy50 2 роки тому +2

    One important point missing in the instructions is what to do with the left brake line....I had to cut the bracket to let it drop and give it enough length with the 6 inch drop

    • @EluderRacing
      @EluderRacing  Рік тому +1

      That is a good point and I should have mentioned it. But it’s weird I have done probably 20 of these and other then 1 or 2 i didn’t have a issue so i don’t know if it’s a year thing or gas vs electric thing but a very rare issue but def worth mentioning

  • @ericshepherd9407
    @ericshepherd9407 2 роки тому +3

    Good job, could use some more lighting.

  • @EluderRacing
    @EluderRacing  5 років тому +1

    I'll do my best to help what's your Question.

  • @curtishanlon1781
    @curtishanlon1781 Рік тому +1

    Doesn't show what spring perch you are bolting the 6" mount too.
    That's the most important part wouldn't you think?

    • @EluderRacing
      @EluderRacing  Рік тому

      The rear lift is achieved by taking off the factory u bolts and moving the leaf springs from under the axle to over the axle you then bolt the factory perch to the axle and stack the adapter plate on top of it. It’s basically called a axle flip.

    • @curtishanlon1781
      @curtishanlon1781 Рік тому +1

      @@EluderRacing my 2002 gas ezgo has no plate what so ever welded to the rear end. I haven't seen any video with this type of mount yet. I figured out a way to make it work though for an extra $25.
      All done and riding around.
      I should have made a video of how i did it with the type of mount i have on mine. I know all about axle flip.
      I wanted to finish before it got dark where i could record like he did. 😂

  • @mrblanche
    @mrblanche 10 місяців тому +1

    Are you sure those are 9/16? I thought pretty much everything on these carts is metric, which could be your problem.

    • @EluderRacing
      @EluderRacing  10 місяців тому

      your correct they normally are metric but the nuts were rusted and not there normal size so the 14mm would slip

    • @mrblanche
      @mrblanche 10 місяців тому

      @@EluderRacing I was removing an exhaust bolt on mine this week and I had to use a 7/16, since it was rusted down in size from 12 mm. So I understand where you're coming from!

  • @ronggonahmed1780
    @ronggonahmed1780 4 роки тому +1

    It's really awesome...Man

  • @eppersiii9410
    @eppersiii9410 Рік тому +1

    SO.... I'm stuck on my install of this same kit on an 2000 EZGO TXT. My issue is that the rear axle does not have a welded mounting plate (think you call it an axle-perch)... there is a mounting plate, instead, which is loose. Any ideas?

    • @EluderRacing
      @EluderRacing  Рік тому +1

      So the mounting plates and the u bolts all work together with the u bolts doing all the work

  • @proudfootrp
    @proudfootrp 2 роки тому

    Great video,

  • @ericshepherd9407
    @ericshepherd9407 2 роки тому +2

    Nice job, Could use some more lighting.

    • @EluderRacing
      @EluderRacing  2 роки тому +1

      thanks have def added lighting in my new videos thanks so much for watching!!!

  • @RealRothschild
    @RealRothschild Рік тому +1

    You know you did your lift kit pieces backwards I mean it still works I'm sure but they're supposed to angle towards the back to push the rear wheels a couple inches back

    • @RealRothschild
      @RealRothschild Рік тому

      Still a good video though not trying to be a hater

    • @EluderRacing
      @EluderRacing  Рік тому

      @@RealRothschild this is the standard kit what your talking about is on the long travel kits. thanks for the comment appreciate the interaction.

  • @dustinshewmake2509
    @dustinshewmake2509 5 років тому +2

    Could you tell much of difference in power with the added weight from the wheels and tires?

    • @EluderRacing
      @EluderRacing  5 років тому +2

      dustin shewmake on a 36volt model cart like mine they are only like 2hp when going up to a 23” tire I noticed a huge drop in torque had trouble on some big hills etc...

  • @claytonbowling4481
    @claytonbowling4481 5 років тому +1

    We have golf cart like yours we are beginner on this. Same parts where you go we live in riverside Ohio. Are you close .if you can reply to give information on parts be great

  • @treviersmithen5164
    @treviersmithen5164 4 роки тому +1

    can someone do a diagram on a ez-go golf txt cart wiring "gas"

  • @dominichenderson5455
    @dominichenderson5455 3 роки тому

    I just installed this kit on my EZGO and my driver side brake line is very tight now, I see in your video looks like yours is too. Is that an issue, any recommendations? Thanks

    • @EluderRacing
      @EluderRacing  3 роки тому +1

      Cable is tight I rerouted it a little bit it works fine with no issues

    • @dominichenderson5455
      @dominichenderson5455 3 роки тому

      Thanks for the reply

    • @EluderRacing
      @EluderRacing  3 роки тому +1

      @@dominichenderson5455 my pleasure thanks for watching my video!!

    • @neilellinger6157
      @neilellinger6157 3 роки тому

      This was comedy hr...haha...thanks for the 😃

  • @johnbeach6698
    @johnbeach6698 2 роки тому

    What size wheels are those?

  • @predatorhuntsnw1835
    @predatorhuntsnw1835 3 роки тому

    How wide are the tires?

    • @moonburn87
      @moonburn87 3 роки тому

      if you are doing this yourself then go as wide as you can find to prevent flipping