Superb!👍 I used a silikon plate and made little dots of uv resin and then pull the splashes out with a needle or toothpick. Very thin. Then you have several thin 2d parts you can bend and put together 3d. But with cotton its great too and got a bit more white effect - nice!
First of all, what a beautiful piece this has become!!! Second, even though I am not close to your level I thought of two things that you might consider for next time you do a similar project. 1. presumably the previous step the elf took was also in the water (with big steps maybe outside of this diorama), if so ripples of that impact should be further along and entering the edge of the diorama behind here. 2. The splash has some green in it (I don't remember you talking about it in this vid, but I don't think it is just a reflection either). Considering how thin the water of the splash is, I don't think you would see color and if you would, than it would be much more faint.
Thanks for this cool tutorial! I need to do big blood splatters for a charriot rolling througha huge puddle of blood! So I'll need to prime them and paint them! Do you think it would it work with resin for 3d printing?
13:45 no need to throw it away after dipping it into resin; IPA will clean that right off. I mean IPA is not great for brushes, but at least you can use it multiple times for tasks like these.
Excellent how to video sir. May I request that maybe you can do a video on how to make waves where you would place on the front of a ship where it would split the waves in two ? Best Regards.
Would this work any better with UV resin I feel like you could use this technique and literally craft the exact splash you wanted ? And it would be faster
10:05 What if you dip these into Future / Pledge and let them sit hanging upside down? I think there might be round blobs at the tips, covering these cotton barbs
Would baby wipes be decent alternative for the cotton wool? If you spread those out, you get a similar mesh pattern. Baby wipes are also used for airbrushing marble effects.
Long time from the future, but I just tried this with cotton wool and baby wipes. Baby wipes are easier to control, but you need to spread them apart a lot more than you think.
15:48 Liquitex Gloss Gel is also great for making ripples. Just make sure you don't layer it on too thick, because it will have a hard time curing. EDIT: Later you use Vallejo Water Texture which is basically the same product as the Liquitex Gloss Gel.
Never seen a Frank Frezetta painting brought to 3D so perfectly
Fantastic effect, looks like sports photography, really captured the movement of the figures , awesome painting too 😀👍
Awesome, thanks for sharing!@!
The first thing I thought was: Princess Mononoke. That's one fabulous looking model 👌👏👏👏
This is awesome, but I'd like to see part 2.
What happened to forest base 02?
Amazing! Thank you for sharing and explaining the process so well!
Beautiful work! Looks awsome....!
Superb!👍
I used a silikon plate and made little dots of uv resin and then pull the splashes out with a needle or toothpick. Very thin.
Then you have several thin 2d parts you can bend and put together 3d.
But with cotton its great too and got a bit more white effect - nice!
So cool!! I was JUST looking for how to do an effect like this! Great job!
Incredible work!! Awe inspiring
Wow. Looks amazing! And the video makes it seem deceptively straightforward to do... ;)
Thank you. This is exactly what I was looking for.
Great technique with awesome results, cannot wait to try this
That's incredible anwsome. Love it all
First of all, what a beautiful piece this has become!!!
Second, even though I am not close to your level I thought of two things that you might consider for next time you do a similar project. 1. presumably the previous step the elf took was also in the water (with big steps maybe outside of this diorama), if so ripples of that impact should be further along and entering the edge of the diorama behind here. 2. The splash has some green in it (I don't remember you talking about it in this vid, but I don't think it is just a reflection either). Considering how thin the water of the splash is, I don't think you would see color and if you would, than it would be much more faint.
Great video
Great! Thanks for sharing
Very very nice and inspirational! But where is part 2?
Do you ever just use uv resin so you know instantly if you got any good ones?
very awesome
Thanks for this cool tutorial! I need to do big blood splatters for a charriot rolling througha huge puddle of blood!
So I'll need to prime them and paint them!
Do you think it would it work with resin for 3d printing?
13:45 no need to throw it away after dipping it into resin; IPA will clean that right off. I mean IPA is not great for brushes, but at least you can use it multiple times for tasks like these.
Excellent how to video sir. May I request that maybe you can do a video on how to make waves where you would place on the front of a ship where it would split the waves in two ? Best Regards.
Fun masking tip - use Saran Wrap to cover the major area then seal with masking tape - let’s you get around odd shapes of models posed on a base
The reason why you shouldn't do that is because it tears and can pull paint off due to the static. It's much better doing it the way Andy did it here.
Would this work any better with UV resin I feel like you could use this technique and literally craft the exact splash you wanted ? And it would be faster
The cotton wool pulling was genuinely painful to watch 😬😬😂😂
10:05 What if you dip these into Future / Pledge and let them sit hanging upside down? I think there might be round blobs at the tips, covering these cotton barbs
Would baby wipes be decent alternative for the cotton wool? If you spread those out, you get a similar mesh pattern. Baby wipes are also used for airbrushing marble effects.
Long time from the future, but I just tried this with cotton wool and baby wipes. Baby wipes are easier to control, but you need to spread them apart a lot more than you think.
What would you do different to create a similar effect though of a bullet(s) hitting soils in front of a unit? 🤔
which glue did u use to stick the splash pieces to the solid pond on the base please?
and where are the waves from disturbances - circles on the water?
15:48 Liquitex Gloss Gel is also great for making ripples. Just make sure you don't layer it on too thick, because it will have a hard time curing.
EDIT: Later you use Vallejo Water Texture which is basically the same product as the Liquitex Gloss Gel.
Wandering if UV resin would make more sense, because of the instant curing time. Not watched the whole vid yet, so maybe you go into it later.
Cotton wool? No such thing. It's just cotton lol. No wool in it. Or are you saying wall? Can't tell.
www.amazon.co.uk/cotton-wool/s?k=cotton+wool
Shut up
My God is this beautiful