etrailer | CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE10001G Review

Click for more info and reviews of this CE Smith Boat Trailer Parts:
www.etrailer.com/Boat-Trailer...
Check out some similar Boat Trailer Parts options:
www.etrailer.com/dept-pg-Boat...
www.etrailer.com
Don’t forget to subscribe!
/ etrailertv
Full transcript: www.etrailer.com/tv-Demo-CE-S...
Today we're going to be taking a look at the CE Smith bolster and swivel bracket assembly. Now, this item is sold individually with part number CE10001G or it's available in a four pack with part number CE10001G-4. We offer both of those options here at etrailer.com. This bolster and swivel bracket assembly is gonna let you mount a bunk board your boar trailer. It's gonna feature the dimpled bolster bracket surface. This is gonna help prevent the bracket from sliding along the trailer frame.
That provides more grip at the contact are. It's also gonna feature the elongated mounting slots. These allow for that height adjustment needed for your application during the installation. Each bracket installs vertically on your boat's trailer frame with a U bolt. U bolt is sold separately. The unit's also gonna come with a strong swivel bracket.
That's this piece right here. This is going to allow you to tilt the bunk forward. That's gonna help you to fit the boat hold snugly onto the trailer during the loading process. Hardware is included to get the swivel bracket attached to the bolster bracket. The unit's constructed of 11 gauged galvanized steel.
It's gonna do a great job at resisting rust and corrosion. It is suitable for salt water exposure. The product's made in the USA. We take the measurement of the overall height, measuring from very bottom to very top. That's gonna give us a measurement of 11 inches tall. The dimensions of just the bolster bracket.
I'm measuring just the height of that of the overall length. That's gonna measure ten inches by two and a half inches wide. The notting slots on the unit from edge to edge, they measure three and three quarters of an inch long by a half inch wide. The space right here between the mounting slots is a half inch. When it comes to the dimensions of the actual swivel bracket going to edge to edge in this direction, that's gonna give us a measurement of three and a half inches long. It's going to measure about one and three eights of an inch wide and then the overall height of just that bracket, so from this piece right here to the top is two inches tall. The mount hole diameters on that bracket, those measure three eights of an inch in diameter and those holes are spaced apart from one another on center by two and a half inches. That's gonna do it for today's look at the CE Smith bolster and swivel bracket assembly.