Hello Can you clarify whats on earth are the units used!!!! NOT KNOWING WHATS THE UNITS USED FOR INSTANCE THE DIAMETER OF GEARS, IS A MASSIVE SIT BACK!!! IS IT INCHES ,MM ,CM, METERS, ?!!
There are some "Planetary Setup" options that allow you to make gears fixed, input, or output. This is on the newest version of the gear generator tool: geargenerator.com/beta/ These options will change whether a gear is setup as fixed or not. Keep in mind however, that all the gears have a relationship to one another. So if you make one gear fixed that will change the setup for the other connected gears. I'm no gear pro though, so you might have to just play around with it :)
Hello Very interesting tool. One idea crossed my mind when I used it. Would that be possible for the same gear to have 2 parents/childrens. Best regards
If you create a set of gears, can you download that set and then open it up again? I created a set, downloaded it using "download gearset svg" but when I opened that, it did not show what I created.
I believe it is the diameter of the circle that is from the intersection of the "line of action" (which is the pressure angle 0° being perpendicular to the line between gear centers) and the line connecting the gear centers. In European gear terminology it is really easy: d=m×z (pitch diameter is equal to the module times the number of teeth) Americans have a tougher time with their crazy units!
Hi Neeno :) Yes, the pitch diameter is in inches. If you would like to convert this to another unit of measure, export as an SVG and then you can adjust the unit of measure in Adobe Illustrator or the free software Inkscape.
I cant export many gears at the same time when it select DFX format, also I can´t xport toguether with the set, that is a seriusly weak point. other fail is that the DFX file contain to many segmens, separately, thats not to much useful. I really like the program, is a wonderful idea, please continue improving your program, is almost perfect. thanks, sorry for be hard. but the program needs the changes.
The variable that most impacts the size of the teeth is the diametral pitch. The larger you make this number, the smaller your teeth will be. However, as you adjust this variable your pitch diameter will naturally be adjusted in order to keep your number of teeth the same. If you want a larger gear with small teeth, first adjust your diametral pitch (number of teeth per inch of your pitch diameter) and then increase the pitch diameter to the proper size.
For those it may concern- the pricing has changed, and it is not voluntary anymore. I would have sent some money, but ended up paying about 10 Euro + taxes for the 24 hr download as a paid service. I may not come back.
It can be what you like if you read what it says. "Gear Generator is unitless: if you wish it's inches, cm or millimeters. DXF opened in AutoCAD will have the same value for D/P as it is set above. Gears in SVG are measured in pixels, which is the value multiplied with the scale (Pixel per Unit) as it is displayed on the right side."
Great video! I am having difficulty when importing the cad file to Solidworks, the dimensions are totally off (much larger). Does anyone have any suggestions for fixing this issue?
Hi Mike!I haven't found a great tool online to create internal gears yet, but one great thing about this tool is the ability to export in SVG format. Are you familiar with Inkscape?
The unit of measure on the tool is inches. I exported the file in SVG and measured the pitch diameter and compared my measurement to the populated field on my browser.
To download from gear generator: 1. Open js console (on chrome, press ctrl+shift+i). You should see a line that says "GG started". 2. Into the prompt line (after the >) type: callback(10000, "a") 3. press enter 4. click a download button You have to repeat the step 2 & 3 each time you want to download a gear
it says undefined.. please help! can i get the code of the animation? like of the gear? im trying to build a gear in a tkinter python window but I am nowhere!
Sorry Evan, I am not familiar with AutoCad 2018 and DXF files. When I try to open it I get an error with line 48 saying the table flags are missing. It looks like you might be able to edit the DXF file using a text editor, adjust the appropriate lines, and then the file may work: knowledge.autodesk.com/search-result/caas/sfdcarticles/sfdcarticles/Error-Invalid-or-incomplete-DXF-input-drawing-discarded.html I couldn't give you direct guidance on how to manage this.
Download an SVG from this great site. Download Inkscape. Install. Load your SVG in Inkscape. Save as Windows Metafile (.wmf). [Click on all options when prompted] Use the IMPORT command in AutoCAD to load the .wmf. EXPLODE. Worked for me.
On Firefox highlight the gear you want by moving your mouse over it, and/or clicking on it. Then right-click on the gear, and choose inspect element. You will see portion of the page with the code highlighted. Copy it. (Ctrl+C) or right click and choose "Copy Inner html" Download Inkscape, create a new svg file and save it. Open the file with a text editor. You will see a tag . Change that to (remove the /) Then paste the path after it, and add a to the end. so it should be Save the file. Open the file in Inkscape to convert it to DXF and many other formats (Inkscape calls DXF Desktop Cutting Plotter format for some reason, so look for that). DXF can be opened up in AutoCAD or many other CAD systems.
Neat how it's gone to a fully online thing. I used this years ago when it was an actual downloaded software.
the only and best thing out there that does this-GearGenerator
THAT'S WHAT I WAS SEARCHING FOR DECADES ... THNX A LOT
I’ve been looking for something like this forever!
Hello
Can you clarify whats on earth are the units used!!!!
NOT KNOWING WHATS THE UNITS USED FOR INSTANCE THE DIAMETER OF GEARS, IS A MASSIVE SIT BACK!!!
IS IT INCHES ,MM ,CM, METERS, ?!!
Very nice tool! Can you tell me how I can pin down one gear and lett the other gear walk around it?
There are some "Planetary Setup" options that allow you to make gears fixed, input, or output. This is on the newest version of the gear generator tool: geargenerator.com/beta/
These options will change whether a gear is setup as fixed or not. Keep in mind however, that all the gears have a relationship to one another. So if you make one gear fixed that will change the setup for the other connected gears. I'm no gear pro though, so you might have to just play around with it :)
Software says $25 for the year. When you go to pay it asks for $30. Very cheeky!
Are you for hire to create a set of gears? Need a 558:30 as the largest with a few more additional… great tool, just can’t create the size…🙏❤️😊
Hello Very interesting tool. One idea crossed my mind when I used it. Would that be possible for the same gear to have 2 parents/childrens. Best regards
Just what I needed... Thank you Abel :D
Maybe a stupid question. How do you change the diameter of the gear?
If you create a set of gears, can you download that set and then open it up again? I created a set, downloaded it using "download gearset svg" but when I opened that, it did not show what I created.
What plugins do I need to use this on Ubuntu 20.04? (works fine on windows, both using firefox.)
Hi, will u please update the clockwise and anticlockwise rotations in the Gear Generator website
very good program, if you add cycloidal gear, will be perfect program =)
Hey, I was wondering if the pitch diameter measured from the center of the gear to the tips of the teeth, or from the center to the base of the teeth?
I believe it is the diameter of the circle that is from the intersection of the "line of action" (which is the pressure angle 0° being perpendicular to the line between gear centers) and the line connecting the gear centers. In European gear terminology it is really easy: d=m×z (pitch diameter is equal to the module times the number of teeth) Americans have a tougher time with their crazy units!
this would be super cool if it was downloadable to for a price
Great video, thanks for share !
Thanks! This one is getting a bit dated. Maybe I need to make a new video... 🤔
sir is there something like this but with other design?
like with a chain?
Other problem is that most of the world uses module (i.e. metric gears) not Diametrical Pitch.
How can i simulate planetary gear box
Thank you;1 Very good your explanation and this program is great!
Looks like it actually does double the RPM you set?
how to put torque info in the 1st gear?
Love it but I would have loved to add a center hole to the gears.
Do you know how to cut extrude?
Loved it until I got hit with a paywall when I went to download the SVG.
Yeah I had that, real shame and cheeky how it hits you with the request for payment right at the end.
@@ivangutowski its not much better even after paying !
@@cultclassic999 Works well :o
Thank you !
@@cultclassic999 Hah, you're a freakin genious! Big up for that!
@@Rocan0 what works well?😮
Can I model a worm gear drive using this tool?
Hello, im just wondering, is the pitch diameter in inches?
Hi Neeno :)
Yes, the pitch diameter is in inches. If you would like to convert this to another unit of measure, export as an SVG and then you can adjust the unit of measure in Adobe Illustrator or the free software Inkscape.
It would be great if there was an option to switch between the outdated imperial and more practical metric system.
@@macnavi numbers are numbers
can i draw rack in this program
what means 'diametral pitch'?
The problem is this website lags when zoomed in.
I cant export many gears at the same time when it select DFX format, also I can´t xport toguether with the set, that is a seriusly weak point. other fail is that the DFX file contain to many segmens, separately, thats not to much useful.
I really like the program, is a wonderful idea, please continue improving your program, is almost perfect. thanks, sorry for be hard. but the program needs the changes.
Can I design something and save as DXF file ?
Does it give me that choice.
For sure! See 3:10 in the video :)
its not free anymore
engrenagem sem fim será um bom complemento, felicitações!
Hi, thank you so much for make this video. I just wanna know how to adjust the size of the teeth.
The variable that most impacts the size of the teeth is the diametral pitch. The larger you make this number, the smaller your teeth will be. However, as you adjust this variable your pitch diameter will naturally be adjusted in order to keep your number of teeth the same. If you want a larger gear with small teeth, first adjust your diametral pitch (number of teeth per inch of your pitch diameter) and then increase the pitch diameter to the proper size.
For those it may concern- the pricing has changed, and it is not voluntary anymore. I would have sent some money, but ended up paying about 10 Euro + taxes for the 24 hr download as a paid service. I may not come back.
nice, just add a possibility to switch it to metric.
It can be what you like if you read what it says. "Gear Generator is unitless: if you wish it's inches, cm or millimeters. DXF opened in AutoCAD will have the same value for D/P as it is set above. Gears in SVG are measured in pixels, which is the value multiplied with the scale (Pixel per Unit) as it is displayed on the right side."
It's a great software.
Thanks Gary! Be sure to subscribe and share :)
Can I download this software.
Hi Gary, unfortunately I haven't found a method to download this app.
thank you so much
Such a shame it is not free, is there a good programmer out there that can HELP ! PLEASE
so cool~
Great video! I am having difficulty when importing the cad file to Solidworks, the dimensions are totally off (much larger). Does anyone have any suggestions for fixing this issue?
Probably your problem consist in a inch to mm conversion, try to check if you are working in SI units.
Internal gear ability would be great
Hi Mike!I haven't found a great tool online to create internal gears yet, but one great thing about this tool is the ability to export in SVG format. Are you familiar with Inkscape?
Do you know what are the units the program is using? Inches? cm?
The unit of measure on the tool is inches. I exported the file in SVG and measured the pitch diameter and compared my measurement to the populated field on my browser.
Thanks!
There are some good python scripts for gear cads, or use the polygon source in his webpage.
hey man!.. I dont know how shall i extract.. I really want those.. If you can would you please send the code to isherlockholmes99@gmail.com
thanks!
To download from gear generator:
1. Open js console (on chrome, press ctrl+shift+i). You should see a line that says "GG started".
2. Into the prompt line (after the >) type: callback(10000, "a")
3. press enter
4. click a download button
You have to repeat the step 2 & 3 each time you want to download a gear
it says undefined.. please help! can i get the code of the animation? like of the gear? im trying to build a gear in a tkinter python window but I am nowhere!
Hard work setting up my train and found to my dismay NO SAVE option
good luck engineers
Does anyone know how to open the file in autocad 2018? I download the file and open it but there is nothing in the drawing.
Sorry Evan, I am not familiar with AutoCad 2018 and DXF files. When I try to open it I get an error with line 48 saying the table flags are missing. It looks like you might be able to edit the DXF file using a text editor, adjust the appropriate lines, and then the file may work:
knowledge.autodesk.com/search-result/caas/sfdcarticles/sfdcarticles/Error-Invalid-or-incomplete-DXF-input-drawing-discarded.html
I couldn't give you direct guidance on how to manage this.
Download an SVG from this great site. Download Inkscape. Install. Load your SVG in Inkscape. Save as Windows Metafile (.wmf). [Click on all options when prompted] Use the IMPORT command in AutoCAD to load the .wmf. EXPLODE.
Worked for me.
With the latest update, the exported DXF can be opened with AutoCAD
Is this in millimetre?
The unit of measure is inches.
Sad it's not free anymore... I made a lot of great projects with it... now alot of youth can not be inspired by free tools anymore.
On Firefox highlight the gear you want by moving your mouse over it, and/or clicking on it.
Then right-click on the gear, and choose inspect element.
You will see portion of the page with the code highlighted.
Copy it. (Ctrl+C) or right click and choose "Copy Inner html"
Download Inkscape, create a new svg file and save it.
Open the file with a text editor.
You will see a tag . Change that to (remove the /)
Then paste the path after it, and add a to the end.
so it should be
Save the file.
Open the file in Inkscape to convert it to DXF and many other formats
(Inkscape calls DXF Desktop Cutting Plotter format for some reason, so look for that).
DXF can be opened up in AutoCAD or many other CAD systems.
Thx
They have removed the free download option :´(
guess its not free anymore
But why? Just install Fusion 360 (free) and use FM Gears addon (free) from Autodesk App Store.
Sounds great. Got a video on how to use it after installing?
so nowadays, you HAVE to pay for this shit? craaaaap