Making a mind blowing 1 cylinder gasoline/gas engine at home 100% (see through engine) at home

Поділитися
Вставка
  • Опубліковано 6 січ 2025

КОМЕНТАРІ • 80

  • @gabtechexpo4017
    @gabtechexpo4017  9 місяців тому +18

    That spark generator is 3.7v to 400kv, I forgot to write that down.

    • @Kanonenking007
      @Kanonenking007 4 місяці тому +3

      where can i buy the parts

    • @ElHickey
      @ElHickey 4 місяці тому +2

      You sell pdf sheets to trace onto the building material?😊

    • @Suprin12
      @Suprin12 4 місяці тому +2

      what is the name for making that electric spark

  • @viral74991
    @viral74991 4 місяці тому +3

    Otak saya tidak pernah memikirkannya sampai ke sana 😂 tp saya tau step by step , 👍🏻 , anda seorang jenius

  • @armelmunezero7918
    @armelmunezero7918 9 місяців тому +10

    That's great be forward!
    The next time you have to make a functional jet engine

  • @JK-Real-Science
    @JK-Real-Science 4 місяці тому +2

    Very nice job 👏👏👏

  • @CenReaper.
    @CenReaper. 7 місяців тому +45

    Fun fact: the sealing of that thing is so terrible that you don't even need to mix air and fuel because air is moving next to the cylinder.

    • @gabrielv.4358
      @gabrielv.4358 4 місяці тому +2

      "next"?

    • @CenReaper.
      @CenReaper. 4 місяці тому +2

      ​@@gabrielv.4358I meant exhaust gases,air is going through the valve

    • @ATAOIS
      @ATAOIS 3 місяці тому +2

      If it were sealed or just worked without a proper valve it's gonna Blow up

    • @solomon9388
      @solomon9388 Місяць тому +1

      lmao yes, i was thinking if he actually sealed that, how does oxygen get in and exhaust out

    • @SadCatStudio.
      @SadCatStudio. 12 днів тому

      It still works though

  • @solomonterhemba
    @solomonterhemba 9 місяців тому +3

    You're doing well brother. Soar

    • @gabtechexpo4017
      @gabtechexpo4017  9 місяців тому +1

      Thanks friend

    • @1islam1
      @1islam1 9 місяців тому

      ​@@gabtechexpo4017👉🔴What Do Muslims Believe about Jesus?
      Muslims respect and revere Jesus (peace be upon him). They consider him one of the greatest of God’s messengers to mankind. The Quran confirms his virgin birth, and a chapter of the Quran is entitled ‘Maryam’ (Mary). The Quran describes the birth of Jesus as follows:
      (Remember) when the angels said, “O Mary, God gives you good news of a word from Him (God), whose name is the Messiah Jesus, son of Mary, revered in this world and the Hereafter, and one of those brought near (to God). He will speak to the people from his cradle and as a man, and he is of the righteous.” She said, “My Lord, how can I have a child when no mortal has touched me?” He said, “So (it will be). God creates what He wills. If He decrees a thing, He says to it only, ‘Be!’ and it is.” (Quran, 3:45-47)
      Jesus was born miraculously by the command of God, the same command that had brought Adam into being with neither a father nor a mother. God has said:
      The case of Jesus with God is like the case of Adam. He created him from dust, and then He said to him, “Be!” and he came into being. (Quran, 3:59)
      During his prophetic mission, Jesus performed many miracles. God tells us that Jesus said:
      “I have come to you with a sign from your Lord. I make for you the shape of a bird out of clay, I breathe into it, and it becomes a bird by God’s permission. I heal the blind from birth and the leper. And I bring the dead to life by God’s permission. And I tell you what you eat and what you store in your houses....” (Quran, 3:49)
      Muslims believe that Jesus was not crucified. It was the plan of Jesus’ enemies to crucify him, but God saved him and raised him up to Him. And the likeness of Jesus was put over another man. Jesus’ enemies took this man and crucified him, thinking that he was Jesus. God has said:
      ...They said, “We killed the Messiah Jesus, son of Mary, the messenger of God.” They did not kill him, nor did they crucify him, but the likeness of him was put on another man (and they killed that man)... (Quran, 4:157)
      Neither Muhammad nor Jesus came to change the basic doctrine of the belief in one God, brought by earlier prophets, but rather to confirm and renew it.

  • @雾雨魔理沙-w1f
    @雾雨魔理沙-w1f 4 місяці тому

    结构简洁,看上去真的很厉害👍very nice

  • @IkechukwuStephen-nm1vi
    @IkechukwuStephen-nm1vi 8 місяців тому +4

    This is creativity

    • @clocknack
      @clocknack 3 місяці тому +2

      Not its fake

  • @brlinf06398
    @brlinf06398 9 місяців тому +1

    14th viewer and first commenter

  • @operacionalrodovale4983
    @operacionalrodovale4983 5 місяців тому +1

    Simply incredible in all its construction and genius. Very rewarding and enjoyable to watch the entire project and execution. I signed up immediately!

  • @gabrielv.4358
    @gabrielv.4358 4 місяці тому +1

    Very interesting

  • @RalphyTheCoyote
    @RalphyTheCoyote 4 місяці тому +3

    This is cool. The only question is how do you accelerate it?

  • @bangyus01
    @bangyus01 3 місяці тому

    beautiful

  • @christopherh6361
    @christopherh6361 2 місяці тому

    Can you tell me plastic/glass materials you used exactly, to be able to deal with the combustion heat? please and thank you. Also name of valve, and name of the circuit completer that the fly wheel hits? please! awesome vid

  • @amirzsz316
    @amirzsz316 4 місяці тому +1

    may i ask u where u get all the stuff?

  • @HungLong-x3p
    @HungLong-x3p 3 місяці тому

    Do you have the plans of the engin for everyone🥰

  • @ajid3846
    @ajid3846 25 днів тому +1

    Mantaf ok

  • @zbaktube
    @zbaktube 2 місяці тому

    Correct me if I understand it wrong, but this is not an Otto engine but a non-compressing/Lenoir engine, is it?

  • @PrzemyslawJ
    @PrzemyslawJ Місяць тому

    How does it works without air?

  • @matimex3342
    @matimex3342 2 місяці тому

    where i can buy this trigger?

  • @playgames8094
    @playgames8094 9 місяців тому +1

    what is the size of the piston and crankshaft and the molds you used size measurement of each material used

    • @gabrielv.4358
      @gabrielv.4358 4 місяці тому +1

      If you are that good you dont need sizes

  • @zhuryyt124
    @zhuryyt124 2 місяці тому

    can you make something like this, but use alcohol as fuel??

  • @adhamr23
    @adhamr23 2 місяці тому

    What did you use for spark plug components?

  • @vladkamael
    @vladkamael 9 місяців тому +12

    So basically it runs untill exhaust gasses don't fill the whole thing or what?
    WHERE DO THEY GO? Escaping through valve while it's open or smth??

    • @gabtechexpo4017
      @gabtechexpo4017  9 місяців тому +5

      I remembered saying the piston and cylinder aren’t air tight. At the down stoke of the engine excess exhaust gas escapes leaving few gas and air for the fuel mix and fair compression before the ignition occurs and the cycle repeats itself.

    • @vladkamael
      @vladkamael 9 місяців тому +4

      ​@@gabtechexpo4017 Oh damn didn't see that at all. I was too busy trying to observe to understand it myself xd
      Makes sense now, very cool 👍

    • @gabtechexpo4017
      @gabtechexpo4017  9 місяців тому +5

      Thanks

  • @herobrinegaming438
    @herobrinegaming438 2 місяці тому

    How to make it speed control

  • @hellmax9928
    @hellmax9928 4 місяці тому +2

    we should call 3 stroke it

  • @Kiteh123
    @Kiteh123 2 місяці тому +1

    will real gasoline work for the engine?

  • @Mehmet5454._m
    @Mehmet5454._m 16 днів тому

    please how to make v8 engine

  • @reynardhermawan7749
    @reynardhermawan7749 6 місяців тому +1

    What material do you use

  • @gaming_at_night
    @gaming_at_night 13 днів тому

    but sir were is outlet, how we remove smoke

    • @SadCatStudio.
      @SadCatStudio. 11 днів тому +1

      Lighter gas has almost no visible smoke

  • @realmar.x
    @realmar.x 4 місяці тому +5

    Put it in a toy car to see if it has strength

    • @ATAOIS
      @ATAOIS 3 місяці тому

      Read the top comments

    • @ATAOIS
      @ATAOIS 3 місяці тому

      I not gonna say anything else

  • @ADGAMINGPOINT
    @ADGAMINGPOINT 3 місяці тому

    Can you provide blue print so I can cut the part easily

  • @dharmeshdave9091
    @dharmeshdave9091 4 місяці тому

    How To Buy It😅

  • @mbaholuchukwu4656
    @mbaholuchukwu4656 Місяць тому

    🎉🎉

  • @zentheplayerrapper8504
    @zentheplayerrapper8504 4 місяці тому

    😱😎👌💯

  • @Beansyt123.00
    @Beansyt123.00 2 місяці тому

    the compression ratio is probably 2:1 or somin

  • @TerryRag
    @TerryRag 3 місяці тому +2

    Where is the exhaust it cant run without it

    • @SadCatStudio.
      @SadCatStudio. 11 днів тому

      The cilinder is not air thight so it will just get out

  • @NguyenHo-so4tw
    @NguyenHo-so4tw 4 місяці тому

    Where is the discharge pipe?

  • @subhamdas735
    @subhamdas735 16 днів тому

    But oxygen nojel

  • @brlinf06398
    @brlinf06398 9 місяців тому +4

    this is uploaded at 10:02
    UTC +08:00

  • @mifta1999
    @mifta1999 2 місяці тому +1

    Where is the Air intake ??

    • @RalphyTheCoyote
      @RalphyTheCoyote 2 місяці тому

      it's not airtight so it's naturally aspirated you could say

  • @chubbyjalbuna
    @chubbyjalbuna 9 місяців тому +9

    How's that working it doesn't even have any compression 😂

    • @dickzonfready1666
      @dickzonfready1666 5 місяців тому

      It doesn’t work with compression but with propulsion
      It can’t work in a big engine though
      The explosion will still create small amount of force without compression ,enough to pull out the piston and rotate the flywheel

    • @Niloy__sports_area
      @Niloy__sports_area 3 місяці тому +1

      rights breather

    • @RalphyTheCoyote
      @RalphyTheCoyote Місяць тому

      @@Niloy__sports_areathat's lighter fluid not gasoline it's volatile at lower temperatures... right?

  • @mairavanhun5402
    @mairavanhun5402 4 місяці тому

    60 rupe u can buy it

  • @Rajubauri9653
    @Rajubauri9653 4 місяці тому

    😂