Nice looking accessories. However, in the US on my olive green 2022 CB500X I installed; T-Rex engine guard, skid plate, radiator screen and luggage rack, Mototekk luggage racks, Tusk heavy duty soft luggage and duffle bag, Barkbuster handguards, a windscreen extender, cell phone holder, a weatherproof power mount w/Garmin zumo xt GPS. My son 3D printed me a sunshade for the GPS that also serves as a security device. In addition, a Shkalacar R1250GS BMW toolbox attached inside of the right luggage rack, a SAE outlet for my tire pump and extended the exhaust deflector so the bike’s dual muffler wouldn’t damage the soft luggage. Total cost including Garmin GPS was around $2,100. Oh, not including the $100 sheepskin butt pad from Alaska Leather. Bought my bike in July, 2022 of the showroom floor before it could cast a shadow. Its been on the Tail of the Dragón, 318 curves in eleven miles on side of mountain, from the south shore of Lake Erie to Tampa, Florida and back [6 states], 3,100 miles on back roads. This spring I’m planning ride on the back roads to southwest New Mexico, to visit the farm I grew up on at altitude of 2000 meters. Then up north to follow the continental divide trail up the Rocky Mountains and east to the Great Lakes and back for an estimated 7,200 miles that will visit 16 states. I've dropped the bike four times with no damage except my pride and easy to pick up. To sum up it's performance, its great, has 300 mile range, predictable power at various speeds and good both on and off the road. I do know for a fact with a 6ft, 200lb dumb rider on its seat it will do 105 mph with a little throttle left. The bike is easy to handle on both dirt and paved roads with no wobble or vibration at 75 mph. However, at that speed the gas mileage is drastically reduced to 45 mpg. Normally I ride the back roads 60 mph and it gets 68 mpg unless I'm running from thunderstorms which in the US you don't want be caught in.
Hello Anthony, Thank you for your feedback. We are pleased that you are so satisfied with the function of our footrests. We wish you a good ride and a happy new year.
Hey @timg3412, thanks for asking. Please check out the link for the center stand for the CB500X: sw-motech.com/bike/HONDA/CB500X/Produkte/Sicherheit/Staender/
Hey @newsss0330, thanks for asking. You can check our list of distributors worldwide here: sw-motech.com/en/Infos/distributors+international.htm We have a distributor in South Korea for you 👍
I have the crash bars and skid plate from SW-MOTECH. NOTE: The cb500x is not a "single-cylinder machine from Honda" as your description states. It is a parallel twin.
Hello @DeanArnold1066, Thank you for your inquiry. You can secure the bags against theft using the security button on the inside. Additionally, locks are included to secure the zippers. Likewise, the side carrier can also be secured against theft. The only backrests we carry are the pillion backrests that attach to the TRAX ADV top case.
I just picked up my 2022 CB500X. Here in the states, we can only get the dull green color. Are you guys across the pond getting that black color? These accessories are hot! I'm going to be ordering them soon. Thank you for the video, and just wow.
@@our12silly Well, I don't understand the politics behind this either. But the US for example gets a lot more different models. For example you get a CBR600RR. We don't. Guess it's due to emissions regulations. That I can understand. Why they don't offer the red and black ones in the US, I don't understand. Guess they think you would only buy green. :D
We do have a rep in Australia, who you may contact: Motorrad Garage 1/108 Welsphool Rd 6106 WA Welshpool E-Mail: petra@motorradgarage.com.au Telefon: 0061 893509052 Fax: 0061 893509707
Hi @jviskup, thanks for the question. If you want to use the PRO Micro tank bag, you only need a PRO tank ring. Just mount the tank ring on your bike and you can easily mount the tank bag on top.
Hello Deivid, you can find the handguards here: sw-motech.com/en/bike/HONDA/CB500X/2023/PC64/products/protection/handguards/KOBRA/4052572189764.htm //HL
Seems like the aluminium mounting kit for the Kobra is now longer, as the Barkbuster one? It goes more towards the center of the handlebar. It would be useful if the dimensions would be specified on the website so that you know what you get: shorter or longer version.
Hello eby, the Barkbuster handguard is actually 7 centimeters longer than the Kobra handguard. If you ever have any questions about dimensions you can always ask our info@sw-motech.com, where a staff member will reach out to you as soon as possible. //JF
Hello Marina, we do not ship directly but you can contact our distributor. Mphil Parts and Accessories Co. 211 A KATIPUNAN AVE BLUERIDGE MILAGROSA 3 1109 Quezon City E-Mail: sales@bigbiketech.com Telefon: 0063 9173096276 //HL
Thanks for the video. I bought this bike and will hopefully get it at the end of May. Now my question: can you tell me if the Drybag 80 fits to the crash bars? From the looks of it they seem a bit too small and closely located to the ground.
Hi. Thanks for your request. We do have an office in the US who you may contact: +1 503 744 MOTO (6686) E-Mail: B2C: info@sw-motech.us B2B: dealers@sw-motech.us Ausstellungsortadresse: 1910 NW 23rd Place Portland, OR 97210
Hello Mitra Unggul, thank you for your comment and your associated interest in our products. If you want to know, if our products available in Indonesia, I would ask you to contact our Distributor under the following details. PT.ONE3 Jaya Indonesia VAT no. 82.556.350.5-452.000 Alam Sutera. Tangerang Selatan Pergudangan T8 No.30 15325 Banten E-Mail: benny.saputra@one3motoshop.com Telefon: +62-21-50667505 Thank you for your understanding. //KS
Hello Dimitris, Thank you very much for your comment. Our crash bars are designed to provide the best possible protection for the motorbike. Since every drop is individual and it always depends on the ground, the type of drop and the angle, we cannot guarantee that nothing will ever happen. Thank you for your understanding. //KS
Hi @fabianguzman6120, we deliver to lots of different countries. With this link you'll find every distributor of us. So you can check the one in your country sw-motech.com/en/Infos/distributors+international.htm
I was looking for a CB500X second hand. There is a lot of these bikes with fog lights , three cases , engine guard with 5000 km . People dreams broken by rain or cold? Hahahha
Hey Toxic Gunz and Gamez, the products will work for the CB500X 2021 as well. Here you can find all products for the CB500X 2021 - sw-motech.com/bike/HONDA/CB500X/2021/Produkte/ . If you are looking for specific products, you can select different categories (Luggage, Safety, Protection...) //JH
Yes, there is :) Mphil Parts and Accessories Co. 211 A KATIPUNAN AVE BLUERIDGE MILAGROSA 3 1109 Quezon City E-Mail: sales@bigbiketech.com Phone: 0063 9173096276
Nice accessories. I bought some of these. Unfortunately the surface of the tank ring adapter is not petrol resistant. It is not always possible to avoid petrol dripping onto the tank ring when refuelling. The paint then gets ugly stains. Unfortunately the customer service is not very helpful and refuses an exchange of the adapter. I am disappointed.
Hello Floxxi, Depending on which additives are contained in the petrol, powder coatings or paintwork may be stained. Unfortunately, we have no influence on this. //HL
Hello, I have a 2022 Honda CB500X (this exact same bike) and I would like to know the exact reference of the KOBRA handguars that fit my motorcycle in a two-point mounitng. HPR.00.220.24500/B or HPR.00.220.22300/B or something else? I'm having a hard time being 100% sure.
Love and plan to get most!! Hard to find 2022 but I’m working on it, and just got out of a GS after years. Refreshing how light the bike is… any chance on a windscreen? Amazing craftsmanship!!
I hope that you have local distributors here in the Philippines that have stocks. All are by order basis and needs to wait months just to get an order to arrive.
Hi, we do have a representative in the Philippines: Mphil Parts and Accessories Co. 211 A KATIPUNAN AVE BLUERIDGE MILAGROSA 3 1109 Quezon City E-Mail: sales@bigbiketech.com Telefon: 0063 9173096276 //JF
Hello Anthony, Thank you for your comment. We do have a variety of GPS mount kits for the Honda CB500X. We will put a link to all available mount kits below, where you can find a kit that fits your GPS. sw-motech.com/en/products/navigation/GPS+mount/ //JF
All these accessories are fantastic but you can’t get them where the hell do you get these parts no one has them they’re back order for six weeks then you call after six weeks well they’re back ordered for 6 to 8 weeks then you call back after 6 to 8 weeks and they still tell you it’s probably gonna be 6 to 8 weeks or they really don’t even know when they’re gonna get them I know I’m going through this!😡
Hello, please excuse that you had such a bad experience with the delivery time. The delivery situation worldwide is very difficult at the moment, e.g. containers are very scarce. Therefore, it can come to longer delivery times to our distributors, which is why also the customers from the distributor have to wait longer for the products. Of course, it is also partly because we do not have certain products in stock at the moment, we are working on changing that. //MM
Hey @NenadSSS, glad you picked the CB500x. Please check the following link sw-motech.com/en/bike/HONDA/CB500X/2022/products/ Here you´ll see every product we offer for this bike. If you need more help, feel free to send us an email to info@sw-motech.com
Hi, we do have a rep in the Philippines: Mphil Parts and Accessories Co. 211 A KATIPUNAN AVE BLUERIDGE MILAGROSA 3 1109 Quezon City E-Mail: sales@bigbiketech.com Telefon: 0063 9173096276
This video just sold me on the ‘22 CB500X. I was very impressed with the SW Motech mounts & bags on my Rebel1100. Keep up the quality work!
Hi Dex,
Thanks for your feedback. We are happy that you like our videos and products. Ride safe! /ND
Nice looking accessories. However, in the US on my olive green 2022 CB500X I installed; T-Rex engine guard, skid plate, radiator screen and luggage rack, Mototekk luggage racks, Tusk heavy duty soft luggage and duffle bag, Barkbuster handguards, a windscreen extender, cell phone holder, a weatherproof power mount w/Garmin zumo xt GPS. My son 3D printed me a sunshade for the GPS that also serves as a security device. In addition, a Shkalacar R1250GS BMW toolbox attached inside of the right luggage rack, a SAE outlet for my tire pump and extended the exhaust deflector so the bike’s dual muffler wouldn’t damage the soft luggage. Total cost including Garmin GPS was around $2,100. Oh, not including the $100 sheepskin butt pad from Alaska Leather.
Bought my bike in July, 2022 of the showroom floor before it could cast a shadow. Its been on the Tail of the Dragón, 318 curves in eleven miles on side of mountain, from the south shore of Lake Erie to Tampa, Florida and back [6 states], 3,100 miles on back roads. This spring I’m planning ride on the back roads to southwest New Mexico, to visit the farm I grew up on at altitude of 2000 meters. Then up north to follow the continental divide trail up the Rocky Mountains and east to the Great Lakes and back for an estimated 7,200 miles that will visit 16 states.
I've dropped the bike four times with no damage except my pride and easy to pick up. To sum up it's performance, its great, has 300 mile range, predictable power at various speeds and good both on and off the road. I do know for a fact with a 6ft, 200lb dumb rider on its seat it will do 105 mph with a little throttle left. The bike is easy to handle on both dirt and paved roads with no wobble or vibration at 75 mph. However, at that speed the gas mileage is drastically reduced to 45 mpg. Normally I ride the back roads 60 mph and it gets 68 mpg unless I'm running from thunderstorms which in the US you don't want be caught in.
How was your ride?
I'm just about to pick up a used '22, and I'm already looking for add-ons and mods!
That rear luggage rack was so beautiful
Nice looking stuff! Will keep this in mind now when winter (workshop) comes
Nice and gorgeous touring set up for cb 500x
very nice accessories :) Watching from the Philippines
Hello Byahe Tyo Vlogs,
thank you for your comment and your positive feedback. We are happy, that you like our products. 😊✌️🏍️💨 //KS
Nice job ❤
The EVO footpegs are fantastic! I have them on my bike and I love them. Hard to get up here in Canada but definitely worth the hassle.
Hello Anthony,
Thank you for your feedback.
We are pleased that you are so satisfied with the function of our footrests.
We wish you a good ride and a happy new year.
Absolutely beautiful ❤️
Nice... Looking forward to have this bike. Thanks for sharing.
WOW 😳 So awesome! Buying everything lol 🙏
😍🤭
such a very good nice elegant material
I like the design of the accessories.i am defenetly in it.I will buy some.😊👍
Hey Patrick Bika, that is a very good decision. WIsh you all the best and ride safely. //JH
No sissy bar or back rest. Essential for a pillion on a long ride.
Hi there, at 1:15 into the video you say you have a centrestand for the bike. Can you please let me have the reference number. Thanks.
Hey @timg3412, thanks for asking. Please check out the link for the center stand for the CB500X: sw-motech.com/bike/HONDA/CB500X/Produkte/Sicherheit/Staender/
I'm interested in Hand guard & ABS side case. Is there any dealers or office your own in South Korea?
Hey @newsss0330, thanks for asking. You can check our list of distributors worldwide here: sw-motech.com/en/Infos/distributors+international.htm
We have a distributor in South Korea for you 👍
looks very good
I have the crash bars and skid plate from SW-MOTECH. NOTE: The cb500x is not a "single-cylinder machine from Honda" as your description states. It is a parallel twin.
yes you´re right 👍 thanks for the hint.
Does the luggage box’s lock into position so they don’t get stolen. Also, is there a pillion back rest available for this bike.
Hello @DeanArnold1066,
Thank you for your inquiry.
You can secure the bags against theft using the security button on the inside.
Additionally, locks are included to secure the zippers.
Likewise, the side carrier can also be secured against theft.
The only backrests we carry are the pillion backrests that attach to the TRAX ADV top case.
What's the bracket for the top rack and side carrier
looks so good! id prefer the givi outback trecker paniers for the bike tho
hi I am from malays, you have any where I can find this total Accessories in my country Ths.
What's the windshield called?
I just picked up my 2022 CB500X. Here in the states, we can only get the dull green color. Are you guys across the pond getting that black color? These accessories are hot! I'm going to be ordering them soon. Thank you for the video, and just wow.
We get green, red and black as color options.
@@nairamize4996 WTF! Thanks Honda!
@@our12silly Well, I don't understand the politics behind this either. But the US for example gets a lot more different models. For example you get a CBR600RR. We don't. Guess it's due to emissions regulations. That I can understand. Why they don't offer the red and black ones in the US, I don't understand. Guess they think you would only buy green. :D
Would love to buy if you were in australia
We do have a rep in Australia, who you may contact:
Motorrad Garage
1/108 Welsphool Rd
6106 WA Welshpool
E-Mail: petra@motorradgarage.com.au
Telefon: 0061 893509052
Fax: 0061 893509707
Sua moto é linda Eu tenho uma CB 500X 2023 vermelha, gostaria de saber onde eu posso comprar esse protetor de mão?
Hi. Is it possible to mount micro tank bag without this specified adapter? Can I use normal regular SW Motech PRO tank ring? Thanks.
Hi @jviskup, thanks for the question. If you want to use the PRO Micro tank bag, you only need a PRO tank ring. Just mount the tank ring on your bike and you can easily mount the tank bag on top.
Hello Deivid,
you can find the handguards here:
sw-motech.com/en/bike/HONDA/CB500X/2023/PC64/products/protection/handguards/KOBRA/4052572189764.htm
//HL
Seems like the aluminium mounting kit for the Kobra is now longer, as the Barkbuster one? It goes more towards the center of the handlebar. It would be useful if the dimensions would be specified on the website so that you know what you get: shorter or longer version.
Hello eby, the Barkbuster handguard is actually 7 centimeters longer than the Kobra handguard. If you ever have any questions about dimensions you can always ask our info@sw-motech.com, where a staff member will reach out to you as soon as possible. //JF
Do you ship your products to yhe Philippines?
Hello Marina,
we do not ship directly but you can contact our distributor.
Mphil Parts and Accessories Co.
211 A KATIPUNAN AVE BLUERIDGE MILAGROSA 3
1109 Quezon City
E-Mail: sales@bigbiketech.com
Telefon: 0063 9173096276
//HL
The pegs look interesting ,I have to say I'm not in love with my current foot pegs.
Hey @noelbowerman1562, glad you like our foot pegs. Feel free to check out our webshop and if you have any questions, feel free to ask 👍
is that tank ring adaptor Pro version or EVO version? Which is the difference? Is ti possible to mount Pro bags with Evo ring and opposite?
Thanks
I'm thinking in buying the hand guard, but it's from the video or the black of it looks very bright compared to the bike? I have the same bike colour
The Barkbusters have a big ugly white logo on black plastic. I'm going to see if I can somehow paint the logo out. Which ones did you end up getting?
Thanks for the video. I bought this bike and will hopefully get it at the end of May.
Now my question: can you tell me if the Drybag 80 fits to the crash bars? From the looks of it they seem a bit too small and closely located to the ground.
May I know how strong the side and top box if the bike fell down..
Hello Benstpool,
The cases are made of 2mm thick ABS plastic. In case of a fall, this material gives way instead of breaking. //HL
This is the dream setup, do y’all ship to the United States?
Hi. Thanks for your request. We do have an office in the US who you may contact:
+1 503 744 MOTO (6686)
E-Mail:
B2C: info@sw-motech.us
B2B: dealers@sw-motech.us
Ausstellungsortadresse:
1910 NW 23rd Place
Portland, OR 97210
The adaptor plate sits too close to the seat. My Yukon Pro Wp Is right at my chest.
Are all of them available in Indonesia?
Hello Mitra Unggul,
thank you for your comment and your associated interest in our products.
If you want to know, if our products available in Indonesia, I would ask you to contact our Distributor under the following details.
PT.ONE3 Jaya Indonesia VAT no. 82.556.350.5-452.000
Alam Sutera. Tangerang Selatan
Pergudangan T8 No.30
15325 Banten
E-Mail: benny.saputra@one3motoshop.com
Telefon: +62-21-50667505
Thank you for your understanding. //KS
Podría poner los enlaces de los productos?
Hola Fernando, puede encontrar todos los productos aquí: sw-motech.com/es/bike/HONDA/CB500X/2022/productos/
no handlebar risers ?
Hi. Yes we do have handlebar risers for the bike. LEH.00.039.24100.20/B (black) and LEH.00.039.24100.20/S (silver)
I dropped my bike from side stand and the crash bars bend 4cm. I didnt ecpect😏
Hello Dimitris,
Thank you very much for your comment.
Our crash bars are designed to provide the best possible protection for the motorbike. Since every drop is individual and it always depends on the ground, the type of drop and the angle, we cannot guarantee that nothing will ever happen.
Thank you for your understanding. //KS
Same happened to me with 2022 honda cb500x "high silver crash bars." Bend for 1cm.
Hola amigos envías a otros países
Hi @fabianguzman6120, we deliver to lots of different countries. With this link you'll find every distributor of us. So you can check the one in your country sw-motech.com/en/Infos/distributors+international.htm
Do you have authorize dealer in Indonesia? I would like to buy the foglamp and handle guard cobra
Hello, the link below will take you directly to the distributors.
sw-motech.com/en/Infos/distributors+international.htm
I was looking for a CB500X second hand. There is a lot of these bikes with fog lights , three cases , engine guard with 5000 km . People dreams broken by rain or cold? Hahahha
yes, I'm buying one with those things just now, a '22. Did you end up getting one?
@@Yowzoe not yet. Now i wait one year . Something will sell the new NX500 !
Hopefully not a dumb question but will these work for 2021 model as well?
Hey Toxic Gunz and Gamez, the products will work for the CB500X 2021 as well. Here you can find all products for the CB500X 2021 - sw-motech.com/bike/HONDA/CB500X/2021/Produkte/ . If you are looking for specific products, you can select different categories (Luggage, Safety, Protection...) //JH
thank you but next time put behind the moto please, I would like to see a complete view of the moto in the video
any low seat available?
Hi Mike,
Unforutnately we do not offer different seats.
Will this can be shipped to India ??
Hello, we are not able to ship directly to India but you can contact our distributor: info@bigbadbikes.com. //MM
Is There A Supplier in The Philippines ?
Yes, there is :)
Mphil Parts and Accessories Co.
211 A KATIPUNAN AVE BLUERIDGE MILAGROSA 3
1109 Quezon City
E-Mail: sales@bigbiketech.com
Phone: 0063 9173096276
Mantappp 🇲🇨🇲🇨🇲🇨👍👍👍
Nice accessories. I bought some of these. Unfortunately the surface of the tank ring adapter is not petrol resistant. It is not always possible to avoid petrol dripping onto the tank ring when refuelling. The paint then gets ugly stains. Unfortunately the customer service is not very helpful and refuses an exchange of the adapter. I am disappointed.
Hello Floxxi,
Depending on which additives are contained in the petrol, powder coatings or paintwork may be stained. Unfortunately, we have no influence on this. //HL
Hello, I have a 2022 Honda CB500X (this exact same bike) and I would like to know the exact reference of the KOBRA handguars that fit my motorcycle in a two-point mounitng. HPR.00.220.24500/B or HPR.00.220.22300/B or something else? I'm having a hard time being 100% sure.
Hello, the correct handguards are the HPR.00.220.24500/B. //MM
@@SW-MOTECH Thank you very much
@@SW-MOTECH Hello if i use HPR.00.220.22300/B will it be the same because the HPR.00.220.24500/B is out of stock?
Price plz
You can find all products including prices here: sw-motech.com/en/bike/HONDA/CB500X/products/
Look who just doubled the price if the bike.
?
Love and plan to get most!! Hard to find 2022 but I’m working on it, and just got out of a GS after years. Refreshing how light the bike is… any chance on a windscreen?
Amazing craftsmanship!!
Hi Matt,
we only have an aluminium windshield for a few models. Unfortunately, you'll have to look elsewhere.
I hope that you have local distributors here in the Philippines that have stocks. All are by order basis and needs to wait months just to get an order to arrive.
Hi, we do have a representative in the Philippines:
Mphil Parts and Accessories Co.
211 A KATIPUNAN AVE BLUERIDGE MILAGROSA 3
1109 Quezon City
E-Mail: sales@bigbiketech.com
Telefon: 0063 9173096276
//JF
Evil fuck lights ??? hell yeah
Just looked for the mount for a sat nav on your site but it’s not there
Hello Anthony,
Thank you for your comment. We do have a variety of GPS mount kits for the Honda CB500X. We will put a link to all available mount kits below, where you can find a kit that fits your GPS.
sw-motech.com/en/products/navigation/GPS+mount/
//JF
Single-cilinder? It's two, not one.
All these accessories are fantastic but you can’t get them where the hell do you get these parts no one has them they’re back order for six weeks then you call after six weeks well they’re back ordered for 6 to 8 weeks then you call back after 6 to 8 weeks and they still tell you it’s probably gonna be 6 to 8 weeks or they really don’t even know when they’re gonna get them I know I’m going through this!😡
Hello, please excuse that you had such a bad experience with the delivery time. The delivery situation worldwide is very difficult at the moment, e.g. containers are very scarce. Therefore, it can come to longer delivery times to our distributors, which is why also the customers from the distributor have to wait longer for the products. Of course, it is also partly because we do not have certain products in stock at the moment, we are working on changing that. //MM
Airfreight?
It is not possible to send every shipment by airfreight, please have understanding for this. //MM
sorry I mean I am from Malaysia
las maletas son muy pequeñas, le quitan presencia a la moto
Just bought a new CB500x, looking for upgrades, what would be the price for the engine protection plate and the side crash bars?
Hey @NenadSSS, glad you picked the CB500x. Please check the following link sw-motech.com/en/bike/HONDA/CB500X/2022/products/
Here you´ll see every product we offer for this bike. If you need more help, feel free to send us an email to info@sw-motech.com
Hi,
we do have a rep in the Philippines:
Mphil Parts and Accessories Co.
211 A KATIPUNAN AVE BLUERIDGE MILAGROSA 3
1109 Quezon City
E-Mail: sales@bigbiketech.com
Telefon: 0063 9173096276
Thanks.. Im from the Philippines 😊
Give me this bike 🙏😔