Service Tutorial Ender - 3 Max Neo Leveling Printing
Вставка
- Опубліковано 3 сер 2022
- Accessories purchase, Please contact our official email or website, remember to attach your machine type and accessories pictures
Official email：info@creality.com
Official website: www.creality.com
Any technical support in need, Please contact our official service email，remember to attach your printer model、complete orderscreenshot、purchase link 、printer product SN and the issue relevant video or picture .
Official service email：cs@creality.com
Any inquiry of firmware and software，Please download it by creality official website：www.creality.com/pages/download
Creality firmware obtaining tutorial： • Video - Наука та технологія
Bed leveling is an art in itself im glad I’m at a point where I can level my bed by sight line. Basically I just use my eyes when I level the bed. It’s worked out fine so far. Just make sure that nozzle is barely touching the surface on all 5 leveling points then auto level.
Just got mine today. Can't get the blasted thing to level. They always make it look so easy lol.
Hi, if you encounter any problems, please feel free to contact our after-sales service and they will help you solve the problem as soon as possible. (Official service email: cs@creality.com)
Thank you, can’t wait for the printer to arrive
what's the point of having the bed level test the corners if it doesn't tell you which corners are too high and which are too low...?
feel the paper getting tight etc
@@davidanthonybatten9150I'm wondering the point of having an auto bed level function if it doesn't give you any information
I have an Ender-3 Max Neo. The right side of the x axis is higher than the left. Is there a video available to show how to adjust it?
The directions here don't match the ones in the manual. Also mine arrived and I spent weeks trying to level the build plate only to just now realize that the glass build plate is not flat, and bowed in center going out. Which makes my nozzle flush against certain areas of the glass.
i have this exact issue still cant level the damn thing, and came to the conclusion that my glass bed is warped?
@@dvdolvera2 if you message support they will replace your glass bed. They will ask you to make measurements and take pictures as proof. If you don't want to do this then you can buy a magnetic build plate for it. I personally like the glass bed.
@@EpicnSkil I think this is what's happened with me. I'm trying to print a wide voro frame that takes up the whole bed. Part of the first layer prints fine, part doesn't print at all as the nozzle's too low, and then part of the layer turns into corn starch spaghetti. Thankfully I already bought a magnetic plate. Gonna have to switch it.
@@raugust6786 I cant seem to find a build plate that will fit my printer.
@@raugust6786 hi did that solve your issue because i believe I'm having the same issue thanks
Huh, I wonder if "Resetting" destroyed my e-steps params...
Hi, if you encounter any problems, please feel free to contact our after-sales service and they will help you solve the problem as soon as possible. (Official service email: cs@creality.com)
ive levvelled the bed on this.....send a print and it rises up 1cm and just pours plastic into the air. Its a load of crap!!!!
The front right side simply doesn't reach. When I do the front left and then go to the front right even when I have completely loosened the front right spring it still doesn't get close to touching
Loosen all the springs and do everything
I don't understand the point of automatic leveling if I still have to do it manually... and 8 out of 10 times it ends up wrong.
I got my ender 3 pro leveled rather quickly. Having a ridiculous time getting the ender 3 neo level. Whats the purpose of auto bed level if it doesn't work. I got it really close and my 1st lays looks awful and this thing is super stringy compared to the pro
Seems it's only being used to correct minor inaccuracies... weird....
Yo dude the front right leveling wheel came loose... That's not supposed to happen is it
What's the point of allowing comments if Creality doesn't respond to any of them? That's NOT support.
This is nothing like what the instruction manual says to do.
And solved my problem
why are we moving our z axis up again @ 3:42
little late but it is not necessary to raise the z-axis up again @3:42. He moves it up because this is an initial setup video and in this example they haven't yet fed the material through the extruder
@@gearstylemag the head on mine just rises up on its own then pours plastic into mid air....these are shit toys
bad printer,these are junk.
agreed had mine maybe 2 weeks and power supply blew and now keeps making this grinding sounds when it moves
Terrible production quality. We are not interested in your chill
Music. We want to hear how you do this critical process for 3D printing Not sitting having to closely watch the and read a CC that is small and very hard to read. I’m generally busy and listen to these videos. There is absolutely no way I am going to sit quietly and read this GD instructional video.
I recommend buying and reading a few books on making, directing, writing videos, films and documentary. Then think about whether or not to make videos. Until then it is clear you have no idea what you are doing with making videos. Sorry. The only way we get great is by seeing ourselves as we are and not as we would like to be. Then we work hard to correct for these shortcomings. Good luck.
Thanks video. my max neo is coming from china