BMW E36 325i M50 B25 Supercharger with water intercooler --- Engine Sound --- Racecar Engine
Вставка
- Опубліковано 15 лис 2017
- BMW E36 325i M50B25 Kompressor Supercharger with water intercooler -- Engine Sound after modification -- Racecar Engine with Rotrex Supercharger and MaxxECU
- Авто та транспорт
Very nice build and awesome sound 👍
A guy who is upfront about his build, rare. The red valve cover is making me look at my M54 with itchy fingers
Ребята у Вас золотое руки! 👍💪
Fuck, it sounds amazing!
So beautiful.
Bounce it off redline 🤘
Super
Wow!
This is beautiful
Thanks👍✌
@@c.rietiker would you please help me on this set up
Hört sich sehr gut
Danke
BRRROOOOTTTAAAAAALLLLLEEERRRRR Sound Junge, der hängt richtig geuiil am gas, der Hammmer, will ich auch :)
Danke danke👍👌🏁🏎
please make more videos with this one
The vehicle is currently under construction, I can make another video in the spring when we are ready to drive
ua-cam.com/video/qnu04op37eg/v-deo.html
Looks nice! And sounds nice! What oil cooler cap is that?
Thanks👍i don't know where we buy the cap, i mean it was on ebay, for a few years
Royal
Southafrica makes an m50 sound the best, watch some southafrican spinning and hear the best m50s in the world
Hello budy, how are you? I was watching your video of the bmw 325i with supercharged kit. I mounted one like 1995 with ms41.1 module. Bought from VF Engineering. But I'm having problems with the adjustment part. Did you make a hit with the original or programmable module?
Hi
We have a MaxxEcu free programabel ECU in the Car.
So 5 years later how has the engine held up with it?
has held up, is currently being sold completely in the motorsport market, as a v10 s85 project is pending.
Damn it sounds mean. Got a 325i M50B25TU myself. You've got a parts list for the engine? :)
M50B25 mit Vanos ab 35001/min
Schmiedekolben 85mm
H-Pleuel 9.0:1
Verstärkte Lagerungen
Verstärke Auslassventile
Verstärkte Einlassventile
C30 Rotrex Kompressor
Ladeluftkühler TRE 550x230x65
Nissan GTR Injektoren 450ccm
Nuke Druckregler und Einspritzeiste
Bosch 044 Pumpe m. Vorförderung
Benzinleitungen Dash Teflon
Ansaug und DK Original
MaxxECU Street/Race Motorsteuergerät
6 Temp.-Sonden für Abgastemp.
Breitbandlambdasonde
zusätzl. Oelkühlung
Bosch Einzelfunkenzündspulen
Bosch Platin Zündkerzen
Thermostat m. früherer Öffnung
M3 Fächerkrümmer
Auspuff 60mm Durchmesser
2x 200 Zellen Katalysatoren
@@c.rietiker thanks, how much did it cost?
@@AreOut >30000$
For the Dyno-Diagramm
www.rennwagenfahren.com/rietiker-motorsport/bmw-325i-e36-kompressor/
@@c.rietiker lot of money...how much for a regular kompressor with intercooler on a stock engine? I cant find any intercooled kit around...
Modifications before supercharger? And how much power is it making after?
inahole1224 Its an orginal M50B25 Engine, fully made as a race engine. 400 Horsepower
Did you change the intake, or is it stock?
No, its stock
what kind of flywheel do u guys have?
Oh that was a long time ago, I think it's from a BMW E30 with a single-mass flywheel, the flywheel was then adapted to the Quartermaster clutch, starter from the M3 E36, hope that helps a little.
PLEASE PLEASElet me know your torque figures??? 😍
@JuhaEerikki
see the link below for a picture of the dyno diagram at the bottom of the page
www.rennwagenfahren.com/rietiker-motorsport/bmw-325i-e36-kompressor/
see the link below for a picture of the performance diagram at the bottom of the page
www.rennwagenfahren.com/rietiker-motorsport/bmw-325i-e36-kompressor/
@@c.rietiker sehr schön
Voilà et je te promet que déjà moin galere qu un turbo et démarre mieux en compresseur
Does one of you know what this conversion will cost approximately
Minimum is 7'000.- to 20'000, with engine, supercharger, ecu, coolers, etc.
@@c.rietiker thanks
Is the ingine stock, and how much boost
Hi the engine is not in stock condition. 1.55bar boost.
@@c.rietiker rotrex can do over 1.5 bar???
@@Gtbtd jep, with waterintercooler, short way to the intake bridge👍We are currently running at 1.25 to 1.3, again with conventional charge air cooling, which results in a small pressure drop. The maximum we have ever reached is 1.55, but the problem is we had very high intakeair temp., that you have too handle. with 1.2 to 1.3 its easier to handle
@@c.rietiker danke sehr für die ausführliche Antwort. Habe erst jetzt gesehen das ihr Deutsch Specht... Erst gestern eure Seite gefunden. Habt ihr die original drosselklappe oder eine elektronische aus dem m54b30
@@Gtbtd wir fahren mit der originalen DK
Вот ещё на эту тему...ua-cam.com/play/PLvxDgOfOB3PVhY_2OZc7WjNdBidnYEG5c.html&si=HSd1C3k-L3KKReRe
Which supercharge you did?
ubpak rotrex c38
@@c.rietiker how much horsepower you get bro?
@@ubpak7346 400 - 450
@@c.rietiker i have m50 b32 stroker 256 h.p i wish too supercharge better than turbo ))this is my opennion
@@ubpak7346 see the link below for a picture of the performance diagram at the bottom of the pagewww.rennwagenfahren.com/rietiker-motorsport/bmw-325i-e36-kompressor/
stock internals?
No
where do you got the waterintercooler
For a few years on ebay, we have installed optional fitting pipes for the supercharger and made some modification. If you want i can send you such a intercooler, used one.
@@c.rietiker do you have pictures of this ?
@@LunaundLiam i can send you if you want, via email or facebook, but only next week
@@c.rietiker that would be great
@@c.rietiker ich habe ihnen auf ihrer Homepage geschrieben
do you have lag?
A lag from what?
@@c.rietiker like you would have with turbo (turbo lag)
@@rowminds5431 no lag, like naturally aspirated, linear power increase
@@c.rietiker how much bhp? Got same engine
@@rowminds5431 413