You who fell on this comment, all I wish for you is Happiness, health, peace and joy. God bless you and jealously guard you against all that is not good. Everything will be fine in your life ...
I will order these PCBs also. Stephano, I had suggested a few weeks ago a bar graph driven by a linear Hall Effect sensor. The closer the magnet is to the sensor, the appropriate LED lights up, depending on the analog signal sent to the LM3914. Have you made any progress on that circuit yet?
@@Stefano91ste no prob but i would like to see a tutorial as i always accidentally make the wrong connections and it doesnt work so ill wait for a tutorial and the 2.0version
@@Stefano91ste oh, I see, yeah I looked at those chrome posts on your board and also quality components. Incidentally I love those red pcbs they look good.😀👍😍 thats my favourite colour.
Hi Connor, nice to hear from you :) For various reasons, including several fake copyright warnings sent by fraudulent record companies (which I disputed and won) on my videos with VEXENTO's free copyright music, which caused a bad drop in views to my videos, I took a break from UA-cam. Unfortunately it's bad to work several hours to make a video and then see it hardly reach 2000 views on a channel with 50K subscribers :(
Hi Stefano! I really like your projects and I would like to order some pcbs from JLC PCB, but I am worried I might have to pay extra taxes for costum duties (I am from Italy). Can you give me some suggestions?
Ciao Alex, allora ti rispondo anche in italiano =) Purtroppo da Luglio 2021 la dogana italiana ha deciso di tassare qualsiasi spedizione proveniente da fuori UE, e non più solo i pacchetti con valore dichiarato maggiore di 22€... Non ho ancora trovato una soluzione funzionante, persino nel mio caso che i PCB vengono inviati come "campioni gratuiti" mi vengono fatti pagare, alla consegna da DHL, 5€ di sdoganamento più altri 2€ circa di iva (non meglio definita). So che Banggood usa una spedizione tramite la quale sdoganano in Belgio e poi da li viene rispedito il pacco in Italia evitando quindi tasse doganali, ma JLCPCB non usa questi metodi. Unfortunately, from July 2021 the Italian customs decided to tax any shipment coming from outside the EU, and no longer just packages with declared value greater than 22 € - I have not yet found a working solution, even in my case that PCBs are sent as "free samples" I am charged, upon delivery by DHL, 5 € for customs clearance and another 2 € around VAT (not better defined). I know that Banggood uses a shipment through which they clear customs in Belgium and then from there the package is sent back to Italy thus avoiding customs taxes, but JLCPCB does not use these methods.
@@Stefano91ste Se ho ben capito, se volessi ordinare tramite JLCPCB, pagherei i costi della spedizione DHL riportati sul sito piú 5 euro di sdoganamento e 2 di iva. Questo per qualsiasi prodotto e qualsiasi quantitá? Inoltre, essendo io un privato senza partita iva, posso ordinare una trentina di schede in un' unica soluzione? Grazie mille per il tuo aiuto, davvero non so a chi chiedere.
@@Mr_Folsi Non proprio oltre alla spedizione ed i 5€ per lo sdoganamento, l'iva viene calcolata in base al valore dichiarato sul tuo ordine (che è il 22%) - La partita iva non serve, è come acquistare su un qualsiasi sito online, il problema è solo che essendo extra UE la dogana vuole la sua fetta...
![[UA] NAVI проти G2 Esports | Blast Premier Fall Final](http://i.ytimg.com/vi/QWlIm4FGESQ/mqdefault.jpg)
Come back, your videos were amazing
Thank you! I hope soon😅
You who fell on this comment, all I wish for you is Happiness, health, peace and joy. God bless you and jealously guard you against all that is not good. Everything will be fine in your life ...
Welcome back Stefano! I missed your work...
Thank you:) Grazie!
Very good your project electonic❤😉👍🇧🇷🇧🇷 Like 270 full 👏👏👏👏
Thank you😁
Awesome project using 4017 and 555 timer IC, nice PCB design also. Big like.
Thank you :)
Welcome back! I was just thinking about you and hoping everything was okay. :)
Thank you! and thanks so much for the thought😁
Bravo, Stefano. Very nice. :-)
I love your channel
Thank you =)
I will order these PCBs also. Stephano, I had suggested a few weeks ago a bar graph driven by a linear Hall Effect sensor. The closer the magnet is to the sensor, the appropriate LED lights up, depending on the analog signal sent to the LM3914. Have you made any progress on that circuit yet?
Nice project!!!
Thank you:)
Can you do a tutorial on your EMF detector?
Hi, I would like to, I would also like to make a 2.0 version of my EMF meter on a matrix board, 100% DIY... but lately I have very little time.
@@Stefano91ste no prob but i would like to see a tutorial as i always accidentally make the wrong connections and it doesnt work so ill wait for a tutorial and the 2.0version
How can I make the trailing effect longer? Higher value of capacitor?
Hi, I'm working on it, but some power transistors will definitely need to be added, because the CD4017 outputs cannot charge high capacity capacitors.
Can a CMOS logic IC directly drive LEDs safely?
Dear sir please make stereo vu meter Circuit using ka2281 ic please please please please please please please please. Ism big fan of you.....
Wow! Stefano that's a quality looking pcb. I like those chrome posts and the high quality trimmer. Where do you buy such quality?
Thank you! I buy my components on internet like LCSC, banggood, amazon and aliexpress, but also local shops and fairs.
@@Stefano91ste oh, I see, yeah I looked at those chrome posts on your board and also quality components. Incidentally I love those red pcbs they look good.😀👍😍 thats my favourite colour.
How would I go about adding a photodiode circuit to this?
Why haven’t you been uploading?
Hi Connor, nice to hear from you :)
For various reasons, including several fake copyright warnings sent by fraudulent record companies (which I disputed and won) on my videos with VEXENTO's free copyright music, which caused a bad drop in views to my videos, I took a break from UA-cam.
Unfortunately it's bad to work several hours to make a video and then see it hardly reach 2000 views on a channel with 50K subscribers :(
If you made this into a circle and put it in a yellow dome you could use it as an emergency bean.
I need a circuit to measure the engine speed of an induction motorcycle. Can you guide me how to build it?
Hi Stefano! I really like your projects and I would like to order some pcbs from JLC PCB, but I am worried I might have to pay extra taxes for costum duties (I am from Italy). Can you give me some suggestions?
Ciao Alex, allora ti rispondo anche in italiano =)
Purtroppo da Luglio 2021 la dogana italiana ha deciso di tassare qualsiasi spedizione proveniente da fuori UE, e non più solo i pacchetti con valore dichiarato maggiore di 22€... Non ho ancora trovato una soluzione funzionante, persino nel mio caso che i PCB vengono inviati come "campioni gratuiti" mi vengono fatti pagare, alla consegna da DHL, 5€ di sdoganamento più altri 2€ circa di iva (non meglio definita). So che Banggood usa una spedizione tramite la quale sdoganano in Belgio e poi da li viene rispedito il pacco in Italia evitando quindi tasse doganali, ma JLCPCB non usa questi metodi.
Unfortunately, from July 2021 the Italian customs decided to tax any shipment coming from outside the EU, and no longer just packages with declared value greater than 22 € - I have not yet found a working solution, even in my case that PCBs are sent as "free samples" I am charged, upon delivery by DHL, 5 € for customs clearance and another 2 € around VAT (not better defined). I know that Banggood uses a shipment through which they clear customs in Belgium and then from there the package is sent back to Italy thus avoiding customs taxes, but JLCPCB does not use these methods.
@@Stefano91ste Grazie mille🙂
@@Stefano91ste Se ho ben capito, se volessi ordinare tramite JLCPCB, pagherei i costi della spedizione DHL riportati sul sito piú 5 euro di sdoganamento e 2 di iva. Questo per qualsiasi prodotto e qualsiasi quantitá? Inoltre, essendo io un privato senza partita iva, posso ordinare una trentina di schede in un' unica soluzione? Grazie mille per il tuo aiuto, davvero non so a chi chiedere.
@@Mr_Folsi Non proprio oltre alla spedizione ed i 5€ per lo sdoganamento, l'iva viene calcolata in base al valore dichiarato sul tuo ordine (che è il 22%) - La partita iva non serve, è come acquistare su un qualsiasi sito online, il problema è solo che essendo extra UE la dogana vuole la sua fetta...
Poi potrebbe anche capitare che quel giorno alla dogana nessuno controlli ed il pacco arrivi senza costi extra... non si sa mai :)
+