Home Theater Projector Installation - Ceiling Mounted - Complete How To Guide - Wiring, Routing
Вставка
- Опубліковано 9 вер 2024
- In this video, I show how to install, mount, and wire a home theater projector. For this installation, I had some challenges and had to get creative. I installed some electrical outlets and cut holes in walls to make it work. In the end, it turned out very nice and clean. This install was unique, as all installs will be different, but this is a complete install from start to finish and I am sure it has many useful universal tips!
Products used in this video:
Epson Home Cinema 2100 Projector:
amzn.to/3wZLoou
Cheetah Universal Projector Ceiling Mount (I do not recommend this, but this is what I used in the video):
amzn.to/35Q5Egu
Brush Insert Cable Pass Through (Amazon link below, but I purchased from Lowe's Model #HT2004-WH-V1):
amzn.to/3h4OmkY
HDMI Cable, 40 Foot, In Wall:
amzn.to/3x0eofX
14-2 Electrical Wire (Amazon link below, but I purchased from Lowe's):
amzn.to/3Aa8cUO
Cable Hider Information (Purchased from Lowe's):
(1-1/2-in, Large enough for Power cable, HDMI, and 2 speaker wires)
MonoSystems CableHider Ultra 6-Piece 120-in L White Raceway, 1-1/2-in
Item #480699
Model #CH512-KTW
Shelf Brackets (Amazon link below, but I purchased from Lowe's Model #25223PHLLG):
amzn.to/3zZ37hM
-----------------------------------
Some of my other projector videos:
How to Make a Projector Screen - Easy, Low Cost, High Quality, Painted Screen - Complete Guide DYI
• How to Make a Projecto...
Home Theater Projector Review | Vankyo Leisure 510 vs Epson Home Cinema 2100 | 1080p HD | Compare
• Home Theater Projector...
-----------------------------------
Amazon product link are paid commission links. As an Amazon Associate I earn from qualifying purchases.
-----------------------------------
#projector #install #DIY
-----------------------------------
How-to and Reviews provides product review videos and how-to videos for a variety of unique and common products and applications. Save some money and do it yourself, and be informed about products.
If you find the content interesting, Subscribe so you don't miss future videos. A new video is posted at least once a week.
Subscribe to How-to and Reviews: / @howtoandreviewsofficial
-----------------------------------
How-to and Reviews
Thanks for explaining in such detail! Looks awesome. Trying to decide if I’m willing to put in this much work for my own house😅
The concept is easy. It just depends on what you need to do to get the hdmi cable from point A to point B. If you set up your device near the projector it’s super easy. Glad the video was helpful!
Thank you!! Such a clever idea
Glad it was helpful!
nice idea for hanging the projector. i have a celling fan in my living room. so i was thinking of moving the projector closer the wall so the celling fan wouldn't interfere with the projector. plus im gonna have to move the surround sound receiver closer to the projector. thnk i'll do a shelve too mount the projector then another for the reciever.
The shelf has worked out well for me. It’s a good solution in the right circumstance. I hope your build goes well!
Great video bud
I hope it helped! I appreciate it!
Hi can you tell me did you use the software keystoning at all? I read every where that you should square up the image without use or keystone (lens shift is ok) I am just having trouble getting a squared image with mine, but it is sitting on the shelf a little bit above the sitting position not upside down on a mount
It depends on the projector. This projector only has the keystone in the software. It is adjusted through the menus on screen.
My previous projector was adjusted manually.
The projector says it’s output is 720p, how can I get it to project in 1080p as described? Thanks!
My guess would be that it just automatically detects the quality of the input device. Maybe your input is 720p? I have personally never changed it in the settings. I just connect my device (PS4, laptop, switch, …).
Is that an Epson projector?
Yes it is. Epson home cinema 2100.
WHo has that commercial panel cieling sht at home?! Grrr
Typically in basements. To finish the ceiling without trapping all of the utility pipes and wiring behind drywall. It’s been in the last two houses that I’ve owned 🤷♂️. I love it. Finished drywall would be a nightmare. I would have been completely screwed dozens of times.
@@HowtoandReviewsOfficial oh what a trip. I lived in Missouri till I was 7. We had a basement. Moved to Texas and haven't seen a basement since.
@@HowtoandReviewsOfficial hey while I got you here, I happen to be about to remove projector from ceiling mount to rid it of large black spot it's projecting....do I just take it off like I put it on or do I remove projector completely from the mount?
@@metaldreams3595 whatever is easier, but there should be a way to leave part of the mount attached to the projector. There should be three or four screws attaching the projector to the ceiling mount and you should not unscrew those. The ceiling mount should have some kind of bolt or mechanism to split it or remove it without unbolting it from the projector.
@@HowtoandReviewsOfficial thanks a lot off your time! I'm on it
😂🤣😂🤣