Pretty slick. I bought an identical bike in the 80's for $15 it had no spark so I threw in a set of points and it fired right up, I was pretty impressed, not sure if I revved it 4 or 5 times before it seized up tight, not a drop of oil in it, ah to be a kid again, live and learn. haha
You ruin your bike. It will turn into flash rust. All chrome parts are dull after blasting. You have to do rust prevention coating and re chrome plating.
water and sand blasting if you notice the sand on top on the engine case when blasting at th rear wheel the paint on the swing arm have remove...wrong title
These old bikes have paper gaskets, you can blow water past them straight injection style!! High pressure can destroy so much, bearings, brakes, hoses....it's just overkill. Unless you're really going all the way on a rebuild.
My dad had the same bike when I was a kid. I think he paid $300 for it around 1980. A few years later he bought a 1977 Honda with a 550 cc four cylinder engine. I'll never forget those old bikes.
It seems muriatic acid with a touch of liquid dish soap is a common method. 1/3 acid and 2/3 water with the liquid soap. I have a pressure washer I'm going to try it with.
@@9thSapper Yamaha TX bikes......love the look of the motors but only made for a few years......next to impossible to find parts......very strange oil filter set-up......Good luck!
Great, now take out the engine, strip it to pieces and replace every gasket because you have just destroyed them, otherwise this will blow oil from every gasket it has after this pressure wash. GENIUS !!
You ruined that bike. This is a lazy way of cleaning what was an otherwise nice classic bike. SOS pads would’ve cleaned those pipes and rims up like new. Now the whole frame will need painted. 🙄
Scott McLennan I’m guessing that was a replacement swingarm with OEM primer and the PO hand painted black gloss with how the paint came off but primer remained
Yup... its ruined... all that chrome will rust so fast now. And why would you directly spray the engine with such a high psi? Planning a rebuild? U should be now....
Saking bersih nya cet rangka sampe ilang pula, dan saking pintar nya situ nyuci di atas tanah dan tanah tersebut muncrat ke atas lg, siapa yang mau mencoba?
The rags in the intake are not good enough to prevent sand getting inside engine. This person has no clue how to restore anything. He should have disassembled the bike and then use vapor blasting to strip paint and rust. Half ass at best
Its a '73 Honda CB350 (I bought one new in "73 with the candy orange flake tank and the single front disc brake...). Great machine!
Pretty slick. I bought an identical bike in the 80's for $15 it had no spark so I threw in a set of points and it fired right up, I was pretty impressed, not sure if I revved it 4 or 5 times before it seized up tight, not a drop of oil in it, ah to be a kid again, live and learn. haha
Damn that must’ve hurt lmao
soda works really well at cleaning alloy bring up a nice clean surface
OMG! I have the identical bike! A lot nicer shape though. Kool that you're restoring it. A lot of fun to drive.
Wow that's the quickest restoration I have ever seen. New plugs and a swill out of the petrol tank and it will run a treat.
don't do this on an engine unless you have a gasket kit ready...
Erik Breaman and some paint
You ruin your bike. It will turn into flash rust. All chrome parts are dull after blasting. You have to do rust prevention coating and re chrome plating.
That bike was a $h!t pile to start with, anything could only make it better.
the water vapor lubricates your lungs so you don't realize you are breathing abrasives.
Powerful blast, really clean
water and sand blasting if you notice the sand on top on the engine case when blasting at th rear wheel the paint on the swing arm have remove...wrong title
Now......dip the whole bike in WD-40 so the rust won't come back. Great video!
You killed that bike...
These old bikes have paper gaskets, you can blow water past them straight injection style!! High pressure can destroy so much, bearings, brakes, hoses....it's just overkill. Unless you're really going all the way on a rebuild.
Amazing work, keep cleaning!!
My dad had the same bike when I was a kid. I think he paid $300 for it around 1980. A few years later he bought a 1977 Honda with a 550 cc four cylinder engine. I'll never forget those old bikes.
Turned out well
How come you didnt do that on pavement?
Great results but we all want to know what mixture you used! Water and ...?????
Looks like a lot of psi that no one can get ahold of.
It seems muriatic acid with a touch of liquid dish soap is a common method. 1/3 acid and 2/3 water with the liquid soap. I have a pressure washer I'm going to try it with.
@@9thSapper please post an update once you do.
@@SgtWojcik Will do. I'm picking up a 73 tx750 next week and I'll see what happens.
@@9thSapper Yamaha TX bikes......love the look of the motors but only made for a few years......next to impossible to find parts......very strange oil filter set-up......Good luck!
It is not water blasting
It sand blaster for paint remover
Water blasting it's true..high pressure water jet
But its not sand, its water lol
He used water bro..
What was mixed with water, baking soda?
That really is amazing. Great video.
Great, now take out the engine, strip it to pieces and replace every gasket because you have just destroyed them, otherwise this will blow oil from every gasket it has after this pressure wash. GENIUS !!
What machine are you using to clean it and what media?
You ruined that bike. This is a lazy way of cleaning what was an otherwise nice classic bike. SOS pads would’ve cleaned those pipes and rims up like new. Now the whole frame will need painted. 🙄
umm yeah it needs to be restored and this is the first of several processes before taking it apart to fully make it like new again lol lol lol
@when noobs did it "the seal"? Very strange statement.
@when noobs did it im just messin around. I got you.
@TG, complete overkill, those paper gaskets barely held hot oil! Bearings, water injection....
Amazing!! 👊
SOOO CLEAN ❤️🤤
so satisfying... next is my motorcycle please?
can i buy this motorcycle.?
Is it just a pressure washer or is it one of those dustless blasting systems?
RisingSunKustoms it seemed to take the black paint right off the swingarm!!
Scott McLennan I’m guessing that was a replacement swingarm with OEM primer and the PO hand painted black gloss with how the paint came off but primer remained
Just water no chemicals?
Mantep motor mu lek salam teko bengkulu sumatra
Wong Lampung aku lur
What is that attachment on the pressure washer lance that you’re using ?
Its a sand blaster attachment for a pressure washer. I believe its called dustless blasting.
वाशिंग मशीन में क्या जुगाड़ था
This klackson so beautiful😍
what is the price of water pressure pump please tell me..... video ❤ from INDIA.....
how much pressure??
Water and what?
Which model
great.. next time demonstate on the driveway so you don't have to keep cleaning same area
Amazing herex
Klaksonya di jual ga?
Wow takes the paint off too..?
Yes, just a very powerful water jet.
What chemicals you used Along with water ?
what about the other side??
Plz Dude can i see Your Machine I'm interested Plz on Short video
oR send To me a full Name of your Machine with all Tools you installed
looking at the final finish I would say that there is some abrasive in the water jet, plain water wouldn't do that to the paint/chrome.
Yes, there is. U see the extra hose on the nozzle. It sucks in the sand. Good system, you are not covered in sand this way. Works clean and quick.
What size power washer?
Oh what so much damage you have done ,, nothing but shot blasting the bike to bits
Who washes a bike in the mud
Couldn't watch to the end, so random, need to do one bit at a time.
Keise Kiya bhai
What media are you using with the water?
Karat....mbrodholl!!!!!
Cat melu mbrodhol po ra boss???
Nak cat e melu mbrodhol ...njuk piye iku??🤔🤔🤔
Cet rongko melu brodol ketok e
What type of servicing machine is used??? To clean the bike
this is sand blasting not just water pressure!!!!
Ye kahan hota hai
Yup... its ruined... all that chrome will rust so fast now. And why would you directly spray the engine with such a high psi? Planning a rebuild? U should be now....
Kya ye bike indian me avleble tha
You're wrecking it.
Super good
Junkyard recommended
Itu pake air apaan?
How do you do it
Superb
Why I am watching this?
Saking bersih nya cet rangka sampe ilang pula, dan saking pintar nya situ nyuci di atas tanah dan tanah tersebut muncrat ke atas lg, siapa yang mau mencoba?
Air campur apa lah gan kira2
Kalo di kita mah pake bensin mamalemon sama sitrun 😂
😂🤣🤭,
Air bertekanan tinggi sama pasir ternyata gan,,
Udah kaya nguburin sesuatu pake pasir 🤣
amazing
Neng gonaku motor kuwi sek payu larang kang.....
Neng kene yo iyo mas
@@yatnotirah1494 weladalah..... hhhhhhh
Bear metal will start to rust insanity
Good thing there isnt any "bear" metal here. Lol im just messin with ya.
Rule no 1. Dismantle the fucker before you start blasting it..sheeesh!
how mutch pressure doest it work? (bar-MPa)
Now rebuild the bike properly, the media in the water will be everywhere.
Amaz i ng
it contains some sand....?
No, just a very powerful water- jet. It took off the paint and rust, it was so strong!
Wasting so much of water to clean this bike
Sweet!
Too Aggressive. High Pressure Water alone is OK
Beli alat semprot itu dimana yah
Saiful Bakri diklinik Tong Fang boss que.. 😂😂
1 word - wow
Completely rusted out the next day
Crazy. 😝😝😝
Salam dari Indonesia
If anyone have this bike rear brake drum with plate do contact me.
This is just sand blasting with water. Next time, why don't you just smash the dirt off with a hammer.
Hemmm... i like this bike..
Nw that's fkin amazing 2 watch gud vid bro
I think this vapour blast🤔. Not water blasting
Needs gas cap latch recall.
The rags in the intake are not good enough to prevent sand getting inside engine. This person has no clue how to restore anything. He should have disassembled the bike and then use vapor blasting to strip paint and rust. Half ass at best
Just send blasting 😏not a wash. Look at the side engine cover
Dnt fool. You just repainted the bike.
Sar I want one bike
Water and sand
KFLY67 can i get the motorcyle..how much i must pay the motorcyle.send in indonesia.😍...i love thats bike..
lmao good luck
@@xxDOTH3DEWxx i want get thats bike😢😢😢😢
Kju
Pake apa nyemprot ny
يعجبنا الهوندا الكلاسيك
I Just wasted 3:51 of my life waching you sandblasting an old cb 350 ...
sandblasting?? really cause i see water not sand
Hope this is illegal in Dubai🤣🤣
why
@@thomaskristensen3201 wil you get 20 litres of water just for washing your car and that too in Dubai😧😦
Hello mr what you have a instagram?
My dad had a 76 cb 360 t
Kevin I have one too 1976 360T mint condition even though I haven't started it since 2005
Hagne ka bhi video upload karo ab