i honestly forgot about your channel, then i saw the notification and almost jumped iut of my chair looking forward to more videos, even if they are less often and regular :)
First time watcher here. Great ideas in this. Your two LED mod was interesting. However, the chip will reset when the two LEDs come on as you have doubled the current consumption (wiring both LEDs in parallel). The battery has an internal resistance and the voltage will droop with the extra load. You're probably on the limit of where the chip will reset which is why it is unstable. If you are really confident with your soldering, you might add a small surface mount resistor in series with both LEDs (one resistor per LED) and wire the LED-and-resistor pairs in parallel. A value of a few tens of ohms should suffice. It will reduce the brightness of the LEDs (you don't need full brightness with two LEDs anyway) and will cut the current consumption to prevent the battery drooping so much.
I tried that for a bit, but it’s just thick enough that no matter where you put it, it either presses too hard on the screen, dislodges components too much, or is too far deep in the watch to effectively communicate with. Someone else could probably find a better way to lodge it in, but through my efforts I couldn’t make it work without anything custom
Thanks for this one. It's been a while. Very well made video, funny that only a couple of days ago UA-cam recommended an old video of yours for rewatch..
I'm glad to hear you're back and I'm looking forward to the next update. Videos of this high quality take time, and I'd much rather wait for a good video than be blasted with mediocre videos from a burnt out creator.
Was walking downstairs to my Java class and saw the notification, said to myself: this made my day. So happy you're alive and healthy node. Take all the time you need, just know you have a community here to support you!
Wait, is this real? Am I dreaming? Oh my God, you're actually back! Thank heavens! We have missed you lots, dude. Those are some cool watch mods, thank you for the cool stuff.
Glad to see you're well! Take your time, love the ethos of your channel and projects and would love to see more in the future, but do what's best for you man!
Brother, how nice to hear from you! We were so in thought.. I would like you to write an article in telling this distance; if, of course, you would like. A hug
Hi! Love your content, I'm glad you uploaded something again. Don't bother forcing content if you don't feel like it / don't have the time to. I got pretty surprised when I got a youtube notification on my phone, and then I remembered you're the only channel I've got the bell turned on for.
hope you continue, always enjoy your fascinating work, Q at Special Branch has nothing on you ! thanks for another enjoyable vid, wishing you all the best with your other projects & endeavors :)
glad you're back! ordered yet another f91w, the kapton tape looks nice excited to try it and make some cool christmas gifts. keep up the great work brother
Wait yo what?? Last video was in a year? That didnt feel that long at all Either way glad to have u back! I rlly do enjoy ur videos, and this one was a nice one too!
Dude, please don't quit, this channel is actually one of the best in my subs, please don't quit. We can help with ideas, I can help design custom PCBs just please don't quit.
I'm glad I saw you on my recommended. I remember being subscribed before, But now I have the bell rung so I won't miss any future videos. glad to see you again after so long.
Yo man! I missed your videos! They had the most interesting stuff, I even hunted down your website to watch/read everything gone off yt, looking forward to you uploading again, one of the few channels I actually hit the bell for.
Was actually thinking about you not too long ago. Its good to hear that you are doing well and still building Amazing inventions. Keep up the work mahn!!
> disappears for over a year
> "hey everyone, it's been a while"
> no explanation
chad
I like to think that this beautiful SOB is some sort of Q for MI6, and has been doing secret squirrel stuff.
But he explains it at the end 😄
"I'M BUSY"
Fr
Chad
When the world needed him most, he returned!
I don't even know who this guy is.
@@grundlefoot Me either, but I am glad he is here.
siema, nie wiem o kogo chodzi
Not for long):
And he's gone
HE'S BACK
Edit: Take your time man, we'll still be here when you return. Be well
That some kind of watch joke 😁
Sometimes just hearing a familiar voice is all you need to brighten up your day. Cheers.
Interrupt everything, Drop everything, He is back.
The legend has returned!
This is honestly one of my favorite channels on UA-cam. I'll be waiting patiently for the next video.
“It’s been a while”
-NODE 2021
I completely forgot about this channel, I'm glad you didn't. Continue doing what you are doing, love your stuff!
i honestly forgot about your channel, then i saw the notification and almost jumped iut of my chair
looking forward to more videos, even if they are less often and regular :)
First time watcher here.
Great ideas in this.
Your two LED mod was interesting. However, the chip will reset when the two LEDs come on as you have doubled the current consumption (wiring both LEDs in parallel). The battery has an internal resistance and the voltage will droop with the extra load. You're probably on the limit of where the chip will reset which is why it is unstable.
If you are really confident with your soldering, you might add a small surface mount resistor in series with both LEDs (one resistor per LED) and wire the LED-and-resistor pairs in parallel.
A value of a few tens of ohms should suffice. It will reduce the brightness of the LEDs (you don't need full brightness with two LEDs anyway) and will cut the current consumption to prevent the battery drooping so much.
You might be able to fit the tiny NTAG203 NFC tag inside there without the need for anything custom.
I tried that for a bit, but it’s just thick enough that no matter where you put it, it either presses too hard on the screen, dislodges components too much, or is too far deep in the watch to effectively communicate with. Someone else could probably find a better way to lodge it in, but through my efforts I couldn’t make it work without anything custom
@@ryangretlein656 try condoms
@@liltay5850 lmao
@@staceixan did you tried
@@liltay5850 i still dont quite get what you said, but i think the condoms you're referring here is like rubbers, no?
Amazing ! He came back with this amazing project, thanks !
This is awesome
It's always inspiring to see your work and hear your voice. Take care buddy.
Welcome back! It's great to have you back, your content is brilliant.
Awesome to see you've returned. Looking forward to upcoming videos!
Wow! I'm glad you'r still alive. Love your videos. Hope you can get back to great projects as before. Cheers!
Take as long as you need! thanks for coming back.
Good to hear from you.
I love the look of the minimalist watch face, especially if it also has micro sd slot.
Oh man I missed you lot.
Welcome back brother
Glad to here you are still around Mate.
Take your time man, when the videos are ready, ill be here to watch it
I literately rewatched your last F-91 W video yesterday.
Thanks for this great update.
Take your time man, always happy to see new stuff from you.
I remembered the production value and the cool watch mods, happy to see this channel active again :>
ayooo i was legit looking for your channel the other day and you just posted!!! glad you're back
You're back! Thank you so much for being alive
Welcome back! And to think that just a few days ago I was browsing your channel, wondering what had happened.
Thanks for this one. It's been a while. Very well made video, funny that only a couple of days ago UA-cam recommended an old video of yours for rewatch..
It's nice to hear you again, take all the time you need. This is quality content, not quantity.
Soo happy to see you pop up in my feed!
I'm glad to hear you're back and I'm looking forward to the next update. Videos of this high quality take time, and I'd much rather wait for a good video than be blasted with mediocre videos from a burnt out creator.
omg, you are back and alive!
we are all happy to see you on again
That analogue watch looks so sick! Love that! Missed your content.
Was walking downstairs to my Java class and saw the notification, said to myself: this made my day. So happy you're alive and healthy node. Take all the time you need, just know you have a community here to support you!
Stumbled on this channel & your website - please keep uploading and creating. Found it really inspiring.
Wait, is this real? Am I dreaming?
Oh my God, you're actually back! Thank heavens! We have missed you lots, dude.
Those are some cool watch mods, thank you for the cool stuff.
Glad to see you're back, we missed you!
Cool to see you back with videos! Hope you are well!
Glad to see you're well! Take your time, love the ethos of your channel and projects and would love to see more in the future, but do what's best for you man!
Hes back !!!! The saviour has returned.
Take your time man.
Good to hear from you again! Cheers!
I just got back from school, opened UA-cam and I had a notification from N-O-D-E
Beat day ever
It's good to have you back! Take your time man, we will be here whenever you can.
the mans back, tbh i almost forgot i was subbed
Love these watch videos! Welcome back, excited to see more!
Keep up the good work mate, hope you sort your stuff out. I really enjoy being in your little corner of the internet, and projects are great as well!
Guess whos back, back again! Man it really felt empty without your videos
Great to hear from you. Take care and take your time.
I see you posted, I drop everything! take your time, man... we'll be here
Your content is some of the best stuff on youtube. But don't let that detract you from doing what you love.
Eyy, I recommended your channel to a mate a week or two ago, absolutely love that you’ve returned!
Welcome back! Its good to see your doing good! hope to see some more!
I so want to get one of these watches so that I can mod it. So happy to see a new vid from you.
I randomly stumbled across your channel today and now see that you've uploaded again after a pause 🥳
Glad to have you back!
Good to know you're still alive!
Return of the king
EDIT: Hey, man take your time. Wish you luck in your other projects
You're back! Thanks for returning.
And just like that he is back
Welcome back!!! Happy to see you are alive!
I'm happy you came back..we were worried 😍😍😍
Good to have you back, man!
One of my favourite channels is back, today is a good day
Brother, how nice to hear from you! We were so in thought.. I would like you to write an article in telling this distance; if, of course, you would like. A hug
Hi! Love your content, I'm glad you uploaded something again.
Don't bother forcing content if you don't feel like it / don't have the time to.
I got pretty surprised when I got a youtube notification on my phone, and then I remembered you're the only channel I've got the bell turned on for.
The N-O-D-E is back online
Time between videos is no object to me mate, your stuff is quality and interesting and I'm always glad to hear from you.
Always hype with a node Casio video
HE RETURNED, AND WITH MY FAVORITE MOD
I’ve been a subscriber for years! I love your crap, man. I’m glad you decided to keep going for us.
my day just got instantly better
hope you continue, always enjoy your fascinating work, Q at Special Branch has nothing on you ! thanks for another enjoyable vid, wishing you all the best with your other projects & endeavors :)
Everyone! He’s back! Cheers!
Happy to see you're back!
glad you're back! ordered yet another f91w, the kapton tape looks nice excited to try it and make some cool christmas gifts. keep up the great work brother
Wait yo what?? Last video was in a year? That didnt feel that long at all
Either way glad to have u back! I rlly do enjoy ur videos, and this one was a nice one too!
Take your time! We are just glad to have you back with us!
Like an old friend walking into the pub.
Great to 'see' you.
Until next time. 😎
I just snagged the last all black F-91W. Awesome work mate, love the stuff you're doing. :-)
Lets goooooooo. He’s back ladies and gentlemen
Missed you alot ngl
Yes you're back. I'm so excited
Glad to see You back, hope to see comeback of LoRa stuff :D
Dude, please don't quit, this channel is actually one of the best in my subs, please don't quit. We can help with ideas, I can help design custom PCBs just please don't quit.
Nice to see you back on the tube
You are a great designer as seen from the style of these videos. You've got good sense of aesthetics
i am so happy to see u back :)
Always great to see a new video, you take your time, champ
I'm glad I saw you on my recommended. I remember being subscribed before, But now I have the bell rung so I won't miss any future videos. glad to see you again after so long.
Oh Im soo thankful your fine!
I was genuinely soo worried
Finally!!! he's back! will be waiting patiently for the next video, very glad to know you're back tho
So happy to see a new post!
From one in one thousand and forty one people, take as long as you want. Your videos are quality and worth the wait. I wear a modded casio as proof.
Glad to have your back N-O-D-E
Glad you're still with us!
Thank you for all your ongoing hard work
YESSSSSSSS, He is BACK
Thank you soooo much 🙏
Yo man! I missed your videos! They had the most interesting stuff, I even hunted down your website to watch/read everything gone off yt, looking forward to you uploading again, one of the few channels I actually hit the bell for.
We do enjoy the videos a lot! Glad to see them. Can’t wait for the big projects you mentioned! Thank you
Was actually thinking about you not too long ago. Its good to hear that you are doing well and still building
Amazing inventions.
Keep up the work mahn!!
Great to have you back