I watched a few videos on how to replace the cabin filter and your vid was by far the best. awesome job at explaining and showing exactly how its done.
Your video was the best video on how to replace this air filter. Thank you! Your explanation of the mechanisms was helpful. This was nearly the same exact process for my 2019 F150 XL.
Well done video. I changed my factory in cabin filter out a after first year (2018 F150 Lariat), and also went with the K&N. I found it easier to put all the items that have tabs, to use a touch of silicone spray on the tabs. It made it so much easier to install and remove the panels later on. Use some Ozium freshener spray on the filter before installing the filter back in place for a nice scent. 👍🏻
Other videos I have looked at did not show the carbon fiber trim piece - yours did, and I could then see where the clips were for it. Once I knew that, it was easy to get it off without breaking it :). Also when I was trying to remove the glove box, there is a plastic support piece that runs underneath it at the back. Had I not seen that in your video, I probably would have been pulling from there and broken it. Once I saw where everything was, it was a 5 minute job. My dealer wanted $79 to change it (flat rate for all ford vehicles, not just F150s). I used a silver marker to mark where the clips where for the carbon fiber piece. Those marks are covered by the rubber trim piece. Next time I do it, I am guessing it will take even less time. Thanks so much!
For the $40 the dealership charges to change it, I will happily have them change it when I get my free oil change. Then when they break that carbon fiber piece it is on their dime.
I'm guessing you should be able to get to it by just removing the section just above the glovebox. Dropping the glovebox down out of the way just gave me more room.
![How To Clean Fresh Air Grate on Ford Raptor-F150 [Bonus Cabin Air Filter Replacement!]](http://i.ytimg.com/vi/yj3Qv5QR-xQ/mqdefault.jpg)
crazy amount of work to change a filter it seems
Just replaced mine on my 2018 raptor. It way filthy! Thanks for walkthru.
It's crazy how fast they get dirty. Nice to have one I can pull out, wash and replace in a few minutes.
I watched a few videos on how to replace the cabin filter and your vid was by far the best. awesome job at explaining and showing exactly how its done.
Your video was the best video on how to replace this air filter. Thank you! Your explanation of the mechanisms was helpful. This was nearly the same exact process for my 2019 F150 XL.
Well done video. I changed my factory in cabin filter out a after first year (2018 F150 Lariat), and also went with the K&N. I found it easier to put all the items that have tabs, to use a touch of silicone spray on the tabs. It made it so much easier to install and remove the panels later on. Use some Ozium freshener spray on the filter before installing the filter back in place for a nice scent. 👍🏻
Other videos I have looked at did not show the carbon fiber trim piece - yours did, and I could then see where the clips were for it. Once I knew that, it was easy to get it off without breaking it :).
Also when I was trying to remove the glove box, there is a plastic support piece that runs underneath it at the back. Had I not seen that in your video, I probably would have been pulling from there and broken it. Once I saw where everything was, it was a 5 minute job. My dealer wanted $79 to change it (flat rate for all ford vehicles, not just F150s).
I used a silver marker to mark where the clips where for the carbon fiber piece. Those marks are covered by the rubber trim piece. Next time I do it, I am guessing it will take even less time.
Thanks so much!
Great video this really helped step by step making the process simple and easy to follow, thanks!
Great vid. Used your directions to change my filter. I have a Mid 801 so I didn’t have to worry about any carbon fiber 😂
Thank you so much! One 18 Raptor owner to another! I did the K & N.
You're welcome! Glad it helped. Now get out there and do some jumps! :-)
Great video! Helps a lot! This is just a stupid design. New raptor is much easier
Cheers thank you bro
Just bought a oem one for my 18 Raptor. $36 from the stealership
What the part number of that piece that sits between the carbon fiber and the glove box???
What a pain in the @$$, wish me luck.
For the $40 the dealership charges to change it, I will happily have them change it when I get my free oil change. Then when they break that carbon fiber piece it is on their dime.
I am 100% normally a DIY guy, but this is crazy...
Valid!
U don't hv to remove glove box.
I'm guessing you should be able to get to it by just removing the section just above the glovebox. Dropping the glovebox down out of the way just gave me more room.
Don't need the music.