How to Remove Rear Spoiler and DIY a New One on Audi S3
Вставка
- Опубліковано 14 чер 2019
- This is my latest DIY for you guys to follow. I recently replaced my rear deck with a carbon fiber deck lip. Initially, I connected with a local CF manufacture, installed their lip, then ended up ripping it off because it did not fit perfectly. This was after 3 attempts!
Then I took a chance on an imported Chinese lip. How well did it turn out? Watch the video as I have a full review at the end.
Some key pointers for a flawless install:
- take your time to remove the stock adhesive
- prep the truck deck well
- use an adhesive promotor
- use 3M VHB tape for the most secure connection
- have a 2nd person help when placing the lip on
As always, thank you for the support! As my channel grows, I am working on additional DIYs and projects to keep you guys entertained.
Until the next time my friends, this is Peter, The Audi S3 Fanatic! - Авто та транспорт
Love your work and DIY’s. I’d like to see you do the black Audi rings front and back.
Caskle, thanks for the kind comments. I have a rear black rings which I will do shortly. Any other suggestions, feel free to let me know!
So with that I would have to just live with it..because if I clair the code it's coming back..thanks
Love the vid and used it for my own rear spoiler install!!😎🙏🏼👍
Great to see you put the video to use!
Lookin' good!
I had that same eBay spoiler... I gave up and just ordered the EMD spoiler and it fit perfectly.
Todd, I've heard very good things about the EMD Pure spoiler, most of which how it fits very well. Unfortunately, I was in no position to spend that kind of additional funds after my first locally made CF spoiler did not fit perfectly.
Looks Great!! Thanks for tutorial
Thanks for watching and the support John B!
Thank you so much for making the video!
Thank you for watching and the support!
Excellent video! Thank you so much. God Bless You!
Thank you for watching and the support!
good stuff man
Thanks AutoMotivate!
Great video. Would have been nice to see footage of removal of adhesive with gloop gone with time taken, etc.
Drew B, others have said this as well so I will take that under consideration the next time I have to remove an OEM body part.
Do you have to remove the oem spoiler before installing a new one? Or can you install it ontop of the oem spoiler?
Hello CryptoJack, unfortunately, you do need to remove the OEM spoiler.
@@TheAutomotiveFanatic okay thanks! Keep up the great videos! Would love to see some interior upgrade videos :)
@@CryptoJackk Thanks for the support CryptoJack! Feel free to share ideas and if it's feasible for me, I'll look at doing the DIY!
thanks for the video...
Absolutely Ken, and thank you for watching!
Thanks
Great vid, I've got an aftermarket one on my GTI I've wanted to remove and realign. I feel much more confident now.
John, I am glad to hear that the video gave you a bit of confidence to perform the work. It's not tough at all, just a little tedious. Take your time and have a 2nd pair of hands to help you realign.
Good install instructions, I am looking to pick up one for my S3 as well, where did you purchase yours? I recently ordered the same CF side mirror caps and will be installing those once they arrive. Thanks for your vid's.
Thanks for watching and the support. The rear wind was purchased off of eBay, but I would not recommend the one I bought. Fitment as you can see, was not precise.
@@TheAutomotiveFanatic I finally install my carbon fiber spoiler, went with one from EMD, which was a good fit for the S3. I was curious if there will always be a little bit of flex on the spoiler after install? I can move my spoiler a little when I pull on it, not sure if that is normal, or if there should be no movement after the install with 3M and adhesion promoter.
@@lylew7407 there will be some play in the wing, especially if it's 100% carbon weave. Give it a little time to adhere.
@The Automotive Fanatic Will do, thanks for the quick reply!
Hi Peter. Great video, how is the eBay spoiler holding up after 6 months? Any clear coat issues?
Akber, surprisingly, the spoiler has held out well! The heat, rain, washes, etc has not damaged the clear coat at all, nor is there any fading. I do though, coat it with quick detailer every time I wash it.
Use RW carbon removal method and the promotor is IPA...Also remove ALL the ends of the tape backing in case it breaks.
Thank you for your input. Removing the tape backing is a tough task.
Cool
Using fishing line then moving to a small zip tie then working ur way up to a bigger one helps take it off faster
Even though the zip tie is plastic, wouldn't you think it might scratch the paint?
My spoiler came from the factory, along with the rear view mirror caps. Expensive but very nice.
Factory is the best!
Nice vid, curious how this spoiler has held up over time?
I sold the S3 a while back and cannot comment on it's longevity.
Other than the outside edges having a little gap, spoiler looks nice. Could always use some sort of black or charcoal colored foam adhesive filler for the gaps and then wipe away excess. eBay purchase? What’s the sellers name? Sweet DIY, thanks!
Mark, much appreciate the comment because I thought the sides didn't look too good. Here is the link from eBay:
www.ebay.com/itm/FOR-14-18-AUDI-A3-S3-SEDAN-V-TYPE-HIGHKICK-CARBON-FIBER-REAR-TRUNK-SPOILER-WING/172876021234?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
I like the new wing. Can you share the link info?
Angel, this wing was purchased over 2 years ago and frankly, there may be better versions out there. I would search eBay and see what you're able to find. This copy I installed, was not the best.
Hi Peter I have a question for you...does the catless downpipe make your car have a engine check light..because I'm going to install my jb4 but I want to know before I buy the downpipe..
hello Clive, yes, you will have a CEL using a catted or catless DP.
What width 3m tape do you recommend? Thanks 👍
19mm dear
Great video! Do you know where can i buy the OEM Spoiler from the S3 for an A3? Thanks!
Bruno, what color is your A3? I still have my Sepang Blue OEM lip (OEM spoiler).
@@TheAutomotiveFanatic its Silver.
@@brunobiaggi6214, darn, too bad.
@@TheAutomotiveFanatic is it possible to paint it? Or do you know where can i find one?
@@brunobiaggi6214, it is possible to paint over my OEM lip. EBay might be the best option to find an OEM lip in gray.
I have a white car and the adhesive promoter left a stain that I noticed a couple of weeks after. Any suggestions for removing the stain?
Try using a polishing compound where the stain is. Rub it in and use some pressure to "break" the stain loose. Then wipe it down with a quick detailer spray.
Hey, do you know anything about the carbon fiber spoiler from Winn autosport? The place you ordered your front lip from. I'm looking to get a spoiler that has oem fit and EMD is always sold out. :(
CJ, Winn Autosport basically sells the same rear spoiler. I am local to them and have seen both EMD and Winn. Just be prepared for a very slow purchasing process with Winn.
@@TheAutomotiveFanatic Hey thanks for the reply! I just ordered form Winn. Btw do you think you will ever install a rs style grille on ur s3?
@@KIDOFCLIPS be patient with the order from Winn. If they have it locally, it should be pretty quick to send out.
Regarding installing a RS style grill, yes, I have thought about it but have heard stories of S3 owners who received grills which did not fit properly. I may take the plunge one day.
@@TheAutomotiveFanatic I just ordered one from EMD, ill let you know how it fits once i get it!
@@KIDOFCLIPS I would love to see the final outcome!
Do you put the adhesive promoter on the car and on the tape (on the spoiler)?
R V, you want to put the adhesive promoter on the car AND on the spoiler itself. Once you've done that, then you can first put the tape on the spoiler, then attach it to the car.
@@TheAutomotiveFanatic thank you
Is it possible to reuse the previous spoiler with all the used 3m tape on it for another vehicle? If so, could you just replace the tape on the previous spoiler or you would need to completely remove the old tape? Then place new tape?
Yes you can reuse the spoiler. Just make sure you thoroughly clean both surfaces and use a high quality adhesive promoter and 3M tape.
Question, for the 3M tape go for 1inch or half inch width tape?
1/2" would work fine.
What products did you use to get adhesive and excess glue off? Generic or name brand?
James, as harsh as it sounds, I used acetone to break the glue down. After I used that, I wiped it down with IPA.
@@TheAutomotiveFanatic thanks. Saw the alcohol water mix as well. Taking my China bought carbon fiber spoiler off. The plastic has cracked up bad.
Ik this is two years later but use automotive goo be gone
Where did you buy the red tape adhesive promoter thanks
Cho, the adhesive promoter and red 3M VHB tape were all bought from Amazon.
Is it possible to remove a lip and reuse it cause I’m buying the same car just higher performance just want to reuse som parts
Yes it is japinder. You have to be careful and take your time when removing your old lip.
so that's what it looks like under my stock lip. interesting.
Where did you get the lip from?
@James, it's just a cheap eBay spoiler. If you're referring to the front CF lip, that is a WINN Autosport Pure.
How’s the strength going through car washes, or a person leaning heavily on it?
Brandon, I used industrial grade adhesive so the lip is on securely and would easily survive car washes. You would literally need to pry it off. As far as having someone lean on it, it could take the force, but I would not recommend it.
The Audi S3 Fanatic great thank you. 👍 Mine just came in the mail today. Same lip. VHB tape on the way as well.
@@brandonh6838, make sure you use adhesive promoter too! That will work great to keep that lip on.
Just installed today. Great advice on the tape/adhesive promoter. Looks great & very solid. Thanks again!
@@brandonh6838, right on! Thank you for the support!
I prefer the original lip to be honest but each to their own.
@Eddie, the OEM lip is an understated design which isn't bad. Since I have a few CF parts on, I wanted a bit more of an agressive looks, thus the change.
Did you get the wing on Amazon! If not where?
This particular spoiler was purchased on eBay.
11:55 immediately after placing it down, you start repeatedly pulling the spoiler up and down, pulling it away from the surface.
All videos I have seen say just to push down on it. Is there a reason you were wiggling it so hard? Thanks
Milan, I watched the part you referenced and believe I was "seating" the spoiler to the trunk and making sure the back side was also making contact.
Wish I watched this before I did mine lmao
It was a tedious task, wasn't it?
Same... just took an L a bit misaligned and not fitted to perfection :(
How would I move it a bit without taking it all off ?
Xavier, unfortunately, you cannot move it without having to pull things back up. My suggestions would be, using tape, mark the location where you want the lip to rest. Then slowly work from one edge to the other while peeling the adhesive.
Okay thank you 🙏
Can you tell me where you got the spoiler please?
This particular spoiler was purchased on eBay.
What length tape is typically required? 👍
Dak, I purchased a roll of .5 in x 15 ft 3M VHB tape. You will use roughly the same length as the wing you install.
there's a part that you put on a drill something like an eraser disc that get that stuff off without hurting the paint.
You're correct. It's a rubber wheel that removes vinyl and 3M taping. I had one before but honestly, was afraid it would ruin my paint so I gave up on it.
Can I ask, why you have so many power drivers hanging on the wall?
Hello Shane, great qustion. A couple of the drivers you see are impact rated and I use those to impact nuts off. Others are simply screw turners....it was the only place I could sort all the tools together.
Excuse me I want to add an spoiler on my cla mercdes and could you show me how to remove it
4kPapi, does your CLA currently have a small rear trunk "lip"?
@@TheAutomotiveFanatic no I would just to like to install it
@@4kpapi148 you'll need alcohol and 3M tape to install your trunk lip.
How wide is the wing?
Agustin, it's the same width as the trunk deck.
The Audi S3 Fanatic how wide is the trunk? Reason I ask is I’m looking to install this on a different vehicle since it’s only a tape application
Agustin, it's 46" edge to edge.
The Audi S3 Fanatic thank you so much!
Video First 3 min summary : - I ruined my trunk with an expensive locally made CF spoiler that didn't fit, at this point just trying to put a spoiler, * any spoiler* back on my trunk so that i can forget about the whole ordeal. I am reaching nervous break point.
Totally understand !!
@goognam, were you a fly on the wall? You pretty much hit the nail right on the head.
Glosshy?
Yep glosshy...I make up words all the time!
Is that 3M tape?
Correct! It's 3M VHB.
i pull out like 8.5 inches
Side view mirror caps, he meant.
Most of these products are coming from China and due their affordability car enthusiasts buy them. I had same issue when fitting an X5 F15 rear boot spoiler. The edges on both sides don’t sit flush and I don’t think applying extra adhesive will help - theres approx. 2/3mm gap on the edges. Probably won’t fit it & try to return!
MA Ali, you're correct. CF items purchased fro China are a hit and miss. Sometimes you get lucky, other times you do not.
Just one thi g cann this thing go on a6 2006
I don't know...I've never tried on a different model.
Skrillixxxx
Bro i fucked mine up 😆
It happens man.
sorry bud but the fit is off.. your gonna get a bunch of gunk under that spoiler when winter comes
That little space your taking about is there for a purpose just as your factory had the same space. Air should be able to get in and out there should have been two small holes under your spoiler. Why is that because when it’s super hot out that spoiler will expand and if it can’t release the hot air within itself it will bubble and warp and will be no good. That is the reason for that little space so air can escape from the two very small holes under the spoiler. If you for some reason covered those up with tape then be prepared to replace it after a hot summer or if your like me I live in Florida so it’s hot all year it won’t be long before it’s trash. I can send you pics of a spoiler that was installed with those holes covered and show you. If you purchase a aftermarket non carbon fiber spoiler but one like yours that is plastic carbon material and you don’t see two small breather holes then drill some but be careful not to drill through your spoiler. ATTENTION if you bought a real carbon fiber spoiler don’t even try drilling it you will crack it. Takes special drill bits and an expert to do so but you don’t have to worry if it’s really true carbon fiber it doesn’t need breather holes. Unfortunately we have all seen what happens to plastic that has sat in the Sun they don’t do so hot no pun intended lol. Only reason your factory spoiler doesn’t need to breath is because it’s not hollow like these after market ones can be.
Shawn, I appreciate you thorough insight. I do not know enough about the "holes" you mentioned, but do understand the concept.
Does he know it’s ‘adhesive’ not ‘Anhesive’
Thanks for the correction. At least I managed to spell it correctly in the details.
You showed none of the work.... 🤔
You're correct Sea Bass. The actually work of "cutting" through the OEM lip adhesive took over an hour, required me to heat the lip, as well as grab new fishing line roughly 20-30 times. I did not want to subject viewers to that lengthy, mundane process. I did though, offer instructions @ 4:48 to help viewers through the removal.
Bro..5 minutes until you get to the install. Cmon
Thanks for the input Jack, some people need more hand holding and explanations than you. Good to see that you're mechanically astute.