0:10 Kai - "I'll do it, before somebody else pretending to be me does it first" Honestly, I'd be able to easily differentiate Kai and Lok from a mile away.
I get some answer for comparison from Zhiyun, hope it is helpful The key points differs Crane 2S from 3s are: 1,User group, 3s aims for semi-pro & pro users who use cinema cams such as Red KOMODO, Canon C200/300, Sony FS5/7 2s aims mainly for common users who use mid-end mirrorless/DSLR such as SONY A7S3, Canon R5/5d mark3, Panasonic s1h Note: there is an overlap for compatible cams for 3s &2s but only 3s can carry all 2s models while 2s can’t carry some large form factor cams 3s can work with. 2,Handling design 3s’s sling mode can help users to handle large cams., 2s only has a vertical handling model so only smaller cams can be carried. 3, Vertical screen shooting mode 3s needs extra accessory for vertical screen shooting mode. 2s natively supports vertical screen shooting mode. Note: Vertical full-screen shooting mode goes viral amongst videographers delivering content to mobile video portals such as TikTok, Quibi, and more. 4,Quick-release plate 3s’s quick release plate is fixed to gimbal’s main body., 2s’s quick release plate is removable for higher working efficiency. 5,Zoom/focus controller 3s sticks to the current version of Zoom/focus controller 2s will have a better exclusive Zoom/focus controller with faster focus speed.
So everyone was all excited when gimbal makes went with the lower back arm thing so you could see the screen of your camera. Now this NEW gimbal is back to the old design? Is there some advantage with this older design, especially at $600, over the newer ones like the Crane 3S that can also handle bigger rigs as well?
I check the video carefully, and found that just like crane 3s , crane 2s also comes with Extendable Arm. remove the extendable arm and see the screen.
Is it just me, or has anyone else noticed that e-mails from UA-cam alerting us to new tutorials have not been coming through of late. I am subscribed, and the "bell" is set to all.
my crane 2 shakes so much when im not using my GH5 IBIS and zoomed in really far. Does yours do this? I think i may have damaged my cranes 2 motors when i got it in 2018 and now ithat i properly use it i only just learnt how to balance and calibrate it properly so im thinking the damaged reason makes the most sense. Shame i cant afford the 2S for a while though
Would you say removable batteries are better than built-in? Cause this way adds an extra charger to carry around but it does mean you can buy extras and swap them out...
These are regular lithium ION 18650's. Wouldn't know what kind of power these should be able to handle, but some Sony VTC6's should allow for plenty of capacity and definitely have more than enough power (Rated for 25A). Probably a bit overkill as it ain't a powertool.
I like gimbals but I haven't got the patience to keep setting them up. I would rather have in built camera/lens stabilisation. My Canon 80d does nice video but if I want video I reach for my Osmo action. I know the quality isn't as good but its good enough. Keep up the good work Kai, I've followed you since DigitalRevTV.
So what I'm curious about: What is the maximum payload of this new Crane 2s? I'm still using the old Zhiyun Crane 1. Feels like an oldtimer at the moment.
Lovely gimbal indeed. Just a shame the prices don't appear to get much lower. Although, if they have improved the motor robustness and longevity you should get more long term life out of it. I know a lot of older middle end prosumer gimbals could become quite unreliable after a year or so of continued use. Irregardless of a battery replacement.
@@michaelfilmmaker2870 Yes, it's certainly a competitive price for its class. But I guess they're not enough prosumers yet to see any significant reduction in prices overall. But that may change as more people take up mirrorless film making.
@@PatrickChapmanuk I remember the price of crane 2 is 749usd launched at 2017, the price of Ronin s is 799usd launched at 2018, now crane 2s is 599usd. Just agree with you, the price will be lower and lower, maybe they will have discount in coming pomotion season inlcuding Primeday and Black Friday.
I just bought the Crane 2s. My LG Stylo 4 is not compatible with ZY Play so I cannot activate my gimbal. Other than activation, what all will ZY Play be required for with the Crane 2s?
Thanks for the review! I'm new to the idea of gimbals, at around 5:50 you show some side to side footage. It seems jumpy. Is that in the camera or the gimbal?
@@loudandclearmedia I expected that to be the case! I was considering getting a Weebill S as its cheaper than the Ronin S and has more balancing space than the Ronin SC, but everyone says the horizon goes off quite a bit.
morpheusmorph My Weebill S broke after 5 weeks, then took 5 weeks to repair....trigger stopped working. Build quality is a bit naff too. I also have the Crane M2, no issues with that one.
morpheusmorph No, they replaced the trigger. Only had it back since Monday so yes it now works, but not really tested it properly yet. Probably gonna order a Ronin now, it’s just put me off with the breakage and the build quality.
@@DaveBartram welp, i was about to buy this instead, consider for the compact size and also the ability to move the tripod and easier to do low angle shot.
oh man... around 1:45 What in the name of English gibber is "feffed around a bit?" To a Yankee ear I swore you said "fapped around a bit" at first. lol A lil tmi, but right on...
Trust me, it's the same with a gimbal that doesn't block it As soon as you lower it or want to take a shot from above, you can't use a ''fixed'' screen, so if your camera has a tilting screen, it'll be fine
A M the red was canon like and not too much , it looked nice and decent.To me the gold looks like china or oriental bling bling😁 europeans usually dont like this
0:10 Kai - "I'll do it, before somebody else pretending to be me does it first"
Honestly, I'd be able to easily differentiate Kai and Lok from a mile away.
It's cos someone emailed companies pretending to be him to get free stuff
I get some answer for comparison from Zhiyun, hope it is helpful
The key points differs Crane 2S from 3s are:
1,User group,
3s aims for semi-pro & pro users who use cinema cams such as Red KOMODO, Canon C200/300, Sony FS5/7
2s aims mainly for common users who use mid-end mirrorless/DSLR such as SONY A7S3, Canon R5/5d mark3, Panasonic s1h
Note: there is an overlap for compatible cams for 3s &2s but only 3s can carry all 2s models while 2s can’t carry some large form factor cams 3s can work with.
2,Handling design
3s’s sling mode can help users to handle large cams.,
2s only has a vertical handling model so only smaller cams can be carried.
3, Vertical screen shooting mode
3s needs extra accessory for vertical screen shooting mode.
2s natively supports vertical screen shooting mode.
Note: Vertical full-screen shooting mode goes viral amongst videographers delivering content to mobile video portals such as TikTok, Quibi, and more.
4,Quick-release plate
3s’s quick release plate is fixed to gimbal’s main body.,
2s’s quick release plate is removable for higher working efficiency.
5,Zoom/focus controller
3s sticks to the current version of Zoom/focus controller
2s will have a better exclusive Zoom/focus controller with faster focus speed.
It really does sound like the jingle jangle of a fortune tellers door. Indeed it really does.
Never will need this, but still watching 🤣
It also doubles as a home trainer. What a beast.
So everyone was all excited when gimbal makes went with the lower back arm thing so you could see the screen of your camera. Now this NEW gimbal is back to the old design? Is there some advantage with this older design, especially at $600, over the newer ones like the Crane 3S that can also handle bigger rigs as well?
I check the video carefully, and found that just like crane 3s , crane 2s also comes with Extendable Arm. remove the extendable arm and see the screen.
Is it just me, or has anyone else noticed that e-mails from UA-cam alerting us to new tutorials have not been coming through of late. I am subscribed, and the "bell" is set to all.
Tha gun noises tho!!!😂😂😂🤣🤣😂
Hanging around playgrounds, was the order lifted 😂
I love the old crane 2 and i think i will also love this. ❤️
my crane 2 shakes so much when im not using my GH5 IBIS and zoomed in really far. Does yours do this? I think i may have damaged my cranes 2 motors when i got it in 2018 and now ithat i properly use it i only just learnt how to balance and calibrate it properly so im thinking the damaged reason makes the most sense. Shame i cant afford the 2S for a while though
ZHIYUN told me the 45 degree change voids the warranty, despite providing the tools to help you do so. I have evidence if you need.
Hey Kai, I have looked right through your channel and can’t find a 90d video, am I blind?
thank you for all the great tips
I laughed out loud - he sounds like a fortune tellers door. 😃😃😂😂😂🤣🤣
Never thought I’d see Kai in a man bun!
Just got mine and it’s just shaking uncontrollably on the lowest motor power setting. Bmpcc6k loaded and perfectly balanced.
Did you try turning it on and off again?
Have you found out what that was.
Kai is rockin' the man-bun. Somehow that is the take-away here.
Very cool! I like the black and gold!
Hi Kai !! 😋
How does this function with handycams ? Is it compatible or are there some compromises ?
Thanks 😊
Would you say removable batteries are better than built-in? Cause this way adds an extra charger to carry around but it does mean you can buy extras and swap them out...
I like removable batteries, I used to get other extra 3 batteries for outside shooting.
These are regular lithium ION 18650's. Wouldn't know what kind of power these should be able to handle, but some Sony VTC6's should allow for plenty of capacity and definitely have more than enough power (Rated for 25A). Probably a bit overkill as it ain't a powertool.
3:46 Did Kai almost stick the landing on the pronunciation of the word "camera"? 4.7, 4.6, 4.7,
Do you find this smoother than the weevil S. I have the S and am having trouble getting rid of jitters. Enjoy your videos.
I like gimbals but I haven't got the patience to keep setting them up. I would rather have in built camera/lens stabilisation. My Canon 80d does nice video but if I want video I reach for my Osmo action. I know the quality isn't as good but its good enough.
Keep up the good work Kai, I've followed you since DigitalRevTV.
Nice jordans, are you a secret sneakerhead?
"I'm in the builin' and I'm filmin' myself" - Mac Dre ft Kai
So what I'm curious about: What is the maximum payload of this new Crane 2s? I'm still using the old Zhiyun Crane 1. Feels like an oldtimer at the moment.
I used the Crane v2 up until last month with Bmpcc4k
@@mitchforteclassic with what lens?
It is 5kg
@@michaelfilmmaker2870 Yeah that's the real deal!
Yeeeeeah Mate !!! Comments before Watching the video because I trust On Kai Content 🔥
Trust too.
Lovely gimbal indeed. Just a shame the prices don't appear to get much lower. Although, if they have improved the motor robustness and longevity you should get more long term life out of it. I know a lot of older middle end prosumer gimbals could become quite unreliable after a year or so of continued use. Irregardless of a battery replacement.
Better than ronin s , and more 50usd expensive
acceptable, I think
@@michaelfilmmaker2870 Yes, it's certainly a competitive price for its class. But I guess they're not enough prosumers yet to see any significant reduction in prices overall. But that may change as more people take up mirrorless film making.
@@PatrickChapmanuk I remember the price of crane 2 is 749usd launched at 2017, the price of Ronin s is 799usd launched at 2018, now crane 2s is 599usd. Just agree with you, the price will be lower and lower, maybe they will have discount in coming pomotion season inlcuding Primeday and Black Friday.
But will this hold a fuji xh-1 with battery grip inside a cage? If so, I am on this
Kai’s got new hair style. 🤪
how does it work underslung? the ronin s is notorious for being really bad underslung. I'm about to send mine back.
I just bought the Crane 2s. My LG Stylo 4 is not compatible with ZY Play so I cannot activate my gimbal. Other than activation, what all will ZY Play be required for with the Crane 2s?
Kai pronouncing Zhiyun makes me wonder how much Mandarin he knows...
I was pretty sure Kai will be mounting something much bigger
Hows the up and down axis? Do you still need to ninja walk, or did they fix the up an down bounce?
Does the follow focus in app work yet? Still doesnt seem to work on weebill s
Thanks for the review! I'm new to the idea of gimbals, at around 5:50 you show some side to side footage. It seems jumpy. Is that in the camera or the gimbal?
I believe it is just a frame-rate mismatch between his composition and the footage.
Definitely doesn't look like the gimbal to me; hope that helps!
@@TheLoneGingerShow Thank you sir. I'm learning more about photography and I wanted to make sure.
Amazing man thanks you
how about the canon c300mkiii ? jingle jangle ? bob’s yer uncle?
You can fully Lok it? But can you Kai it too?
i was expecting some hot news on the R5
I'm wondering if this would hold a BMP4K full rig? And can it be mounted without the batterygrip like 3s? Or should I just go for the 3s?
Just got it today it holds a 4k with sigma 18-35 it's rock steady
This vs. Crane 3 lab??
Kai is a nice camera reviewer and I like his review but he doesn't know how to balance gimbal 7:13 and it makes footage shaky
I thought you can read the name of this brand.
Right
Nice gymbals!
But why this when the weebill S is so good?
Like he mentioned, it supports larger cameras.
@@kprox1994 but hasn't the Weebill got powerful gears that can support pretty heavy cameras too? ( i use heavy relatively)
weebill s will work up to around a 5d4 and 24-70. the crane2 will take a 1dx and 70-200, or a proper cine camera without problems.
@@Digi20 thank you for your answer! Subbed!
@@noclickbaitrecipes7565 WBS not for S1H with long lens, not stable as crane 2s
Is there no music on this?
After being burned on the 3S, never again.
Let me guess, horizon going off and cheap plastic feel?
Gregory Maggi correct...and wobbles\shakes, and the bottom thread stripped right out like a spring unwinding. The thing’s just junk.
@@loudandclearmedia I expected that to be the case! I was considering getting a Weebill S as its cheaper than the Ronin S and has more balancing space than the Ronin SC, but everyone says the horizon goes off quite a bit.
I've owned 2 Zhiyun gimbals. Both were junk including the app and customer service. Never again. 👎
Im about to choose between zhiyun weebil s or dji ronin sc. May I know whats the issue you had with zhiyun?
morpheusmorph My Weebill S broke after 5 weeks, then took 5 weeks to repair....trigger stopped working. Build quality is a bit naff too. I also have the Crane M2, no issues with that one.
@@DaveBartram so they did not replace your gimbal? How is it now?
morpheusmorph No, they replaced the trigger. Only had it back since Monday so yes it now works, but not really tested it properly yet. Probably gonna order a Ronin now, it’s just put me off with the breakage and the build quality.
@@DaveBartram welp, i was about to buy this instead, consider for the compact size and also the ability to move the tripod and easier to do low angle shot.
it's a new life
oh man... around 1:45 What in the name of English gibber is "feffed around a bit?" To a Yankee ear I swore you said "fapped around a bit" at first. lol A lil tmi, but right on...
What about the canon 1dx3?:)
dan watson has a video up where he uses it with a 1dx3 and 70-200 without problems.
Nice hair
Batteries with carbon fiber doesnt seen like the best combo
2:03 *suppressor* :)
Did your wife cut your hair?
Whyyyy does it block the screen tho... :((((
Trust me, it's the same with a gimbal that doesn't block it
As soon as you lower it or want to take a shot from above, you can't use a ''fixed'' screen, so if your camera has a tilting screen, it'll be fine
@@filipemeliciano haha you know it .
same same
look up dan watsons new video, you can assemble it in a different way without blocking the screen.
Digi20 oh yeah, thankyou for that
Kai: Ima add shooting sound effects.
Also Kai: 💦💦💦
599$
Loc'd, no play
Carbon Fiber!!!!!! wow
NEW TERM ALERT!!! CAMERA BOOTY ROOM lmfao
wow, camera equipment that uses standar 18650 batteries
I don't like this product, sorry!
😃first
i have crane 2 and it is beautiful with its red ring the gold and the s symbol are ugly on the new version
The gold looks so much better. The red is what was putting me off especially when looking at Weeble s
A M the red was canon like and not too much , it looked nice and decent.To me the gold looks like china or oriental bling bling😁 europeans usually dont like this