Thanks again for another awesome video. I couldn't find much information regarding the NPA/B/C/D ports, so really glad you made this simple to follow video that explained everything I wanted to know!
Wow absolutely 100% better with the video footage and very informative content was very easy to follow and very useful I have seen one video not sure if it was yours or another but they did daisy chain the flysky sensors with voltage speed and Telemetry
Yes you can add lots and they can be the same or different so you could monitor say the motor and ESC temps or dual motor temps and then dual batteries :)
As I can see and the video you put out today was great thank for some really great information I got the phone mount from watching you videos to so keep up the great eork
The DVB monitor wire, that's just any old wire isn't it? Say if I want to read the voltage of the main battery, can I just make my own and make sure it plugs into the right side of the futaba connector?
@@WTFRCCars rightio. So I'm best just to use the positive wire of the DVB sensor wire and leave the negative alone. I was hoping to solder it properly to the soldering tab of my XR8 Pro, but I guess that's out the window now 😆
I was recommended to you by a guy in a group on Facebook. I just got my first NB4. I have it binded but the RX AND TX are only showing one bar. That’s my first problem. Second problem is my servo nor my esc is working. The esc is lighting up but no power to the motor. I have a fgr4 v2 receiver. I need help if you could
The fgr4 receiver is a 2 way receiver that way you get telemetry, try to re bind using 2 way you will also get a bind complete message when it connects :)
The nb4 receivers show you the receiver battery level all the time, you can also monitor the main battery you only connect the + to the balance lead or + on the battery that's powering the ESC/receiver like I do on this vid ) ua-cam.com/video/-XViQoedKBE/v-deo.html
@@WTFRCCars that's the BEC voltage yes. But the BEC voltage never changes really. I was talking about that little battery icon on top of the screen. If you use an external voltage sensor, you can see that icon change according to battery voltage. Like it does on the tx icon.
@@WTFRCCars sure... But it would have been nice. Having that battery icon for BEC voltage makes no sense to me. Because it's NOT CHANGING. If you use a telemetry voltage sensor, it will do it. But not if you use the bvd.
My Noble just came in the mail I'm glad I've been watching your videos as I've learnt alot on usage and set-up of the Nb4
Cool if ya get stuck with anything give me a shout :)
@@WTFRCCars cheers mate! Greatly appreciated
Thanks again for another awesome video. I couldn't find much information regarding the NPA/B/C/D ports, so really glad you made this simple to follow video that explained everything I wanted to know!
Happy to help :)
Wow absolutely 100% better with the video footage and very informative content was very easy to follow and very useful
I have seen one video not sure if it was yours or another but they did daisy chain the flysky sensors with voltage speed and Telemetry
Yes you can add lots and they can be the same or different so you could monitor say the motor and ESC temps or dual motor temps and then dual batteries :)
As I can see and the video you put out today was great thank for some really great information I got the phone mount from watching you videos to so keep up the great eork
Hi try my best glad ya like the vids :)
Very helpful! Couldn’t trace the cvt01 anywhere😉
I love the telemetry add-on's really useful :)
Do you have the PRO yet? Can't wait to see your thoughts of that radio. GREAT camera work.👍
It's on the way I think from flysky :)
This was so helpful! Thank you
Glad ya like it :)
The DVB monitor wire, that's just any old wire isn't it? Say if I want to read the voltage of the main battery, can I just make my own and make sure it plugs into the right side of the futaba connector?
I believe it has a resistor on the wire from what I can tell
@@WTFRCCars rightio. So I'm best just to use the positive wire of the DVB sensor wire and leave the negative alone. I was hoping to solder it properly to the soldering tab of my XR8 Pro, but I guess that's out the window now 😆
Just solder the + to the + on the ESC :)
@@WTFRCCars where abouts is the resister though? Is in right on the end on the prong?
No I'll have a look when I'm get in later but I'm sure I saw something on one of the leads for the dvb :)
I was recommended to you by a guy in a group on Facebook. I just got my first NB4. I have it binded but the RX AND TX are only showing one bar. That’s my first problem. Second problem is my servo nor my esc is working. The esc is lighting up but no power to the motor. I have a fgr4 v2 receiver. I need help if you could
What do you mean by 1 bar? And how do you have it bound as in 1 way or 2 way?
@@WTFRCCars I believed it is bounded 1 way. Thanks for the reply btw
The fgr4 receiver is a 2 way receiver that way you get telemetry, try to re bind using 2 way you will also get a bind complete message when it connects :)
Set it up like this one
ua-cam.com/video/BpEzmS17TEY/v-deo.html
@@WTFRCCars ok will do. Do you have a video on this?
Another great video. Has just saved me a heap of time. Would you be able to give me the details of the sensors?
￡3.42 | FlySky FS-CPD01 FS-CPD02 FS-CTM01 FS-CEV04 FS-CVT01 Sensor Telemetry Data Module Set for FS i6 i10 iT4S iA6B iA4B iA10B RX iBus
a.aliexpress.com/_mPbNVAE
That's a link to them :)
Thanks very much. I have just bought the Pro version and as and when I can afford it I am going to convert them all onto it.
can you use a temp sensor on a fgr4 receiver
Yep just plugs into sensor port :)
@@WTFRCCars thanks for your help. Couldn’t find anything on it
Will this work with the FGR4 and FGR4S?
Yes telemetry works on all flysky receivers
Which telemetry sensor you have?
I have voltage, rpm,temp but ma in not use voltage and temp sensors
Sucks that you can't use the bvd as Rx bat monitor....
The nb4 receivers show you the receiver battery level all the time, you can also monitor the main battery you only connect the + to the balance lead or + on the battery that's powering the ESC/receiver like I do on this vid )
ua-cam.com/video/-XViQoedKBE/v-deo.html
@@WTFRCCars that's the BEC voltage yes. But the BEC voltage never changes really. I was talking about that little battery icon on top of the screen. If you use an external voltage sensor, you can see that icon change according to battery voltage. Like it does on the tx icon.
Yeh I just change the sensors that I have on the top of the screen and set alarm for when I want the lower limit to be at :)
@@WTFRCCars sure... But it would have been nice. Having that battery icon for BEC voltage makes no sense to me. Because it's NOT CHANGING. If you use a telemetry voltage sensor, it will do it. But not if you use the bvd.
Yeh see what ya mean