Glock 19 with Olight PL Mini 2
Вставка
- Опубліковано 5 вер 2024
- In this video I take you step by step on blocking for this light.
once you get the blocking down then you can do these lights with your eyes closed.
start to finish for this left handed holster and it looks pretty damn good.
enjoy
*****************************************************
#Faltac Unlimited
#Kydex holster making
#Kydex holster
#DIY kydex holster
#Kydex
#How to make a kydex holster
#Tlr8
#Polymer 80
#Glock 43x
#Holster making
#Kydex sheath making
#Olight
#Kydex press
#Making a kydex holster
#Laser
#Laser engraving
#Owb holster
#Homemade kydex holster
#How to make a kydex holster at home step by step
#Fnx 45 tactical
#Surefire
#Inforce
#Tlr6
#Glock 19
#Powder coat
#Diy powder coat
That red mag looked like it was in Time Out under that light 🤣🤣🤣
I like the jump cut to the holster being prepped gotta love the showmanship
I figured showing a holster being cut and sanded can be boring and just adds a ton of time to the video. So trying new things
I haven’t even watched it yet, just obsessed watching these videos lmao
Gotta say, your tips and advice is beyond anyone else, no one tells of the 5 layers and that last tip on the site dowel over hang is tops. Been bending kydex for my own stuff and getting great definition thanks to "heat the foam" and a copy of your press. I kept getting foam stuck on the kydex but a light coat of gun oil on it solves that totally. Thanks for all your efforts! Will be visiting some buyers this weekend. Keep the hustle.
Hell yes!
@@FalTacUnlimitedLLC Laser engraving options on website: how do we group buy fomi's from Olson or Bricker and who are they?
@@oldtoymaker4494 if you join "kydex benders" on Facebook, there are 2 guys who run group buys. Basically they buy thousands with a group of people. And they have the option to send to me for engraving. Or you can purchase yourself and send directly to me
@@FalTacUnlimitedLLC OK
Iggy, just received it today. Thank you sir, I love it!
Would be very cool if you could put your logo on the mag and only it glows, or other quotes names custom etc. I bet that would sell well
Also glow fomis? Glomis? Hardware that glows ? Could be cool.
I'm sure there's a way. Just haven't gotten there yet haha
Can you do a video on how to cut out the blocking.
It's pretty straight forward. Figure out the size and shape you need and hit it with a dremel or any metal blade
Who did your logo engraving on your clips or did you do that yourself? I would really appreciate a little information on that process. BTW - I really like how you keep things moving in the Video!
I laser engrave in house, and offer engraving services to other holster benders
Best thing to cut aluminum is a wood blade.
Great job! 💯
Haha I wondered where the hell the mags were, I looked all over the site Lol I'd get one or two just to try out. I know, I never text ya haha Still going to!! Should have time tomorrow tho. I really do need some fomi's made.
What is this wizardry? Haha! Nice video editing. What type of pencils do you use and where do you get them? Are those fabric pencils? I've been making a ton of holsters for Baldr minis and PL minis lately, I love with the blocking how the holster ends up just looking like a square ⬜
Fabric pencils you are right. Can be found at hobby lobby or Walmart. I just order off Amazon. White works the best
When adding a dowel for sight channel on molds that do not have that prepping, I am always having problems with it moving after foam press. What could I be doing wrong? I am also sanding the bottom as you do.
Tape it extremely tight. And by sanding a slot so the front post sits inside the dowel helps a lot.
I’m not sure if it’s been brought up but... do you know if you’ll be able to make a G43X or G48 MOS/ TLR-7 sub holster?
Once I get the tlr7 sub. Yes
when you make a holster for a gun that already has a Red Dot mounted on the slide, do you remove the dot prior to pressing in the mold or will it be okay under the heat and pressure of the clamp?
Depends on how you want to make the holster. I have done it both ways with keeping the rmr or not.if you're looking to cover the rmr. Keep it on. If your cutting around it. Keep it off
@@FalTacUnlimitedLLC ok sounds good, thanks for the quick response!
I think you mentioned in a previous video that you were going to start doing custom kydex prints. Any update on that front? I want to make holsters for my band members with my band's logo on them. I know there's places that do it, but if you're going to start doing it, I'd rather wait until you're up and running.
I'm having trouble with my printer. It won't put ink on paper. Trying to research through it
FalTac Unlimited LLC 10/4. Keep me/us posted!
Hey Iggy, what are we doing up at this hour, it's sick.
I usually work 9am to 2am today was an early night of 9 pm. Hope all is well my friend
How wide is the aluminum piece you used to mold the light on this holster? 1” 1.5” or was it a custom width cut by you?
I cut them to fit different applications. I have some a 1. 1.4 and even 2 inches wide
@@FalTacUnlimitedLLC Thanks. I will check my set up to determine the width.
Random question, why didn't you cut the kydex down to the belt attachment? You left an 1/8 th or so, maybe a quarter inch of material over the belt attachment point instead of cutting it down to the blocking, did that make sense?? Lol Never realized how hard it is to describe these things through text haha
If you cut at the fomi it is actually weaker. Will crack easier. So I leave some material above the fomi
@@FalTacUnlimitedLLC I completely agree and do the same!! My concern was when you showed the pics at the end you could see the holster was "touching" the pistol above the clip, normally for me that's where I'll get wear marks on the gun If I'm not careful. I'm guessing with the light it should open up the holster just enough it doesn't touch?
@@joshmajor8662 the 5 layers of blue tape I put on help a lot with rubbing
@@joshmajor8662 it also keeps the gun from hitting any of the FOMI hardware like the slotted post when you're re-holstering
@@FalTacUnlimitedLLC OK, I'll try it haha Thanks man!! Text ya tomorrow, hopefully Lol
I would like a similar holster for my PSA dagger with light and rmr cut?
Not ready for psa dagger just yet. Although I will be soon!
Is wood good to use for block outs??
Wood can be used but it deforms after a while
@@FalTacUnlimitedLLC Thanks and well one time use should be good for templates. Nice videos keep up the good craftsmans work!!!💪💪💪💪💪