How to cut a rubber mold professionally
Вставка
- Опубліковано 24 лис 2011
- chicjewelry.com/info/education...
Once the rubber mold is cooked, the jeweler is cutting the mold with scalpel, to allow for the master form to come out from the mold and at the same time the mold has the same exact shape/ form as the master mold. This way we start the production of that specific design.
www.Chicjewelry.com features the finest high quality cubic ziroconia stones set in solid Platinum , gold, 14k white gold, rose gold designer settings. Visit www.CHICJEWELRY.COM and see our entire collection of top quality cubic zirconia stones set in same settings as natural diamonds ,sapphire and other precious stones. Buy directly from the maker and save!
MADE IN USA - Навчання та стиль
Thanks for this. The advantage of vulcanised rubber moulds is they last much longer than a cold cast mould. You can make a 2 part mould, but being able to cut a mould skillfully so that both parts true up nicely requires skill. Some people burn an entry hole, some sculp it at the end of the cut. This helped refresh my confidence. Thanks again.
Thanks for watching.
You are sick!!! that was awesome
Why do you leave the hole so small?
Спасибо, немного пополнил свои знания
Ever heard of 2 part moulds?
Call me
nice camera job
where will you find mold caring Ka cimta
i think i would get fired if i cut a mold like that
Maby one day
same dude. he butchered that thing
Hi call me +918988294975
What was wrong or bad about the cutting technique?
agreed , . i molding bits half the size of my pinky nail..... i do like he did in this video , i don't get any issues. pouring 2 part resin.... now , i do add vents also...... that he doesn't have on his.. but he did cut those few reliefs to let the material flow..... and seamlines would be so thin can scratch off with fingernail.
Is the cutting done in such a way to prevent seams from forming in the future pour or injection?
If you mean the wild cutting after already splitting it in half, I think that's for runoff? I'm not sure what the hell he's doing that for, it'll cause problems with more seamlines.
@@convolution223 es para el aire
Your focal length is so shallow that it's making me nauseous
Would I then pour molten metal or wax into the mold?
mudpie gaming same question
+mudpie gaming wax. you then make a plaster/investment mold with the wax, burn it out in a kiln, and pour metal into that
no näkeehän tästä edes vähän mistä on kysymys :-)
Just cutting like a crazy guy that's the first thing.
the way he cuts it makes for a lot of ridges that all need to be filled away or sawn of. Molds should be made so good that you just need too cut the casting branch, sand the whole piece a bit and polish, nothing more !
2nd instead of putting on a cone on the castin channel, he's just cutting it out a little bit, also the channel should be much widder on top. and allot of other mistakes. ..
Would you help me learn how to cut molds?
he's so angry!
not easy, takes skill...
many mistakes,bad mold,real bad cutting technique,good example what NOT to do
Show what you do better :)
Bullshit!