Oil Pressure Switch - Peugeot 206

How to replace the oil pressure switch on a 2002 to 2009 Peugeot 206 1.1 litre petrol. The replacement part I used was a Metzger 0910102. The torque setting for the switch on this particular car is 25 newton meters (18 foot pounds) Thanks for watching. Please comment, like and subscribe !.
All of my uploaded material is protected under copyright law. None of my videos may be re-uploaded, reproduced or transmitted, in part or in full, in any form or by any means, without the written permission of the copyright holder.
© / screwsnutsandbolts 2021
Read important information below:
Disclaimer
Under no circumstances will Screwsnutsandbolts be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Screwsnutsandbolts or a third party. In no event shall Screwsnutsandbolts be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Screwsnutsandbolts, it cannot guarantee against improper use or unauthorized modifications of this information. Screwsnutsandbolts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Screwsnutsandbolts recommends safe practices when performing any do it yourself repairs and or with tools seen or implied in this video. Due to factors beyond the control of Screwsnutsandbolts, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Screwsnutsandbolts.

[@technicalideaindwarka8040]

Good information
Good work

[@screwsnutsandbolts]

Thanks !

[@jonathanvargas931]

i recently bought a 206 1.6 Peugeot and it dosnt have the cables for the sensor what should i dp

[@rolandvarga3638]

Hello, I have a Peugeot 206 cc 1.6 NFU, my problem is that when the revs drop after accelerating, at 1200-1300 it says that “oil pressure insufficient” only displays the text. I have already changed the oil, filter and sensor. What could be the problem? Thanks

[@masumurrahman7305]

Hi have a 2005 307 1.4 petrol. Engine light, STOP sign flashing, beeping noise and OIL PRESSURE INSUFFICENT message. Oil has been changed along with filter and pressure sensor. Any ideas what i could look into next. Thanks

[@screwsnutsandbolts]

I would get your garage to check the oil pressure with a gauge (i.e. remove the sensor and connect a gauge to confirm the exact oil pressure. There may be a blockage somewhere or the oil pickup could be clogged. If you do have low oil pressure, you risk damaging the engine.

[@masumurrahman7305]

@@screwsnutsandbolts appreciate it thank you

[@screwsnutsandbolts]

You're welcome. Let me know if you find out what's causing it.

[@majeddali1664]

Is the oil pressure sensor the same for oil temperature?
I have a problem with the reading of oil temperature, and i cannot find the sensor for it.

[@screwsnutsandbolts]

No the oil level/temperature sensor is in a different position on the front side of the engine block

[@majeddali1664]

@@screwsnutsandbolts can you give a number or a picture of it, so that I can order one, that would be great.

[@angelmarin4874]

Lograste arreglarlo?

[@SmAEsch0R]

thanks

[@screwsnutsandbolts]

You're welcome!

[@sparkyt6497]

What are the symptoms of a faulty oil pressure sensor (why have you changed it ) tia

[@screwsnutsandbolts]

I changed it for demonstration purposes but these the usual main symptoms:
Repeated Blinking from the Oil Pressure Light
Wrong Reading Shows on the Oil Pressure Gauge
Oil Pressure Lights Turns On

[@amyjenkins7420]

Excellent videos been great use. May I ask is this a peageout 206cc 1.6 or same as 206cc 1.6

[@screwsnutsandbolts]

Thank you. I have never worked on a 206cc but I think it should be very similar on the 1.6 petrol engine

[@montsegalvan6107]

Hi! The filter just drain a small amount of Oil or it drains ALL the oil the filter has?

[@screwsnutsandbolts]

It should only drain a small amount of oil

[@moumouzawi8248]

Merci good

[@screwsnutsandbolts]

Thank you !

[@faridsyabana4000]

Video is very helpfull,i have question if oil presure indicator like this (_ _ _ _ _ _ F) flashes is it caused by this switch?

[@screwsnutsandbolts]

I think that's the oil level sensor that gives that reading. It should be located near the bottom of the oil filter housing. Did you check the oil level manually, using the dipstick ?

[@faridsyabana4000]

@@screwsnutsandbolts yes i already check and normal

[@screwsnutsandbolts]

That sounds like it could be a faulty oil level sensor. This is from the Haynes Manual:
Oil Level Sensor
The sensor is fitted in the following locations:
1.4 and 1.6 litre petrol engines: Front side of the cylinder block adjacent to the oil filter housing.
2.0 litre petrol engines: Rear side of the cylinder block at the sump-to-block joint.
1.4 litre diesel engines: Rear side of the cylinder block, between cylinders 2 and 3.
2.0 litre diesel engines: Rear side of the cylinder block, adjacent to the transmission housing.
The removal and refitting procedure is as described for the oil pressure switch. Access is most easily obtained from underneath the vehicle.

[@faridsyabana4000]

@@screwsnutsandbolts oil level sensor same with oil presure switch? Because when check bottom of the filter housing there are switch / sensor like in your video

[@screwsnutsandbolts]

It's not not the same switch as in my video but the procedure to change it is the same. What year and engine is your Peugeot 206 ?