911 Porsche Carrera DME Relay and ECU DIY
Вставка
- Опубліковано 12 вер 2024
- Here is a how to fix you DME Relay if you have a crank no start situation or if it takes your car a long time to start you may want to clean the ECU and check the relay. I always use 99% rubbing alcohol and a new tooth brush med bristle then rinse with distilled water. This is a how to video if you brake parts or your car I am not responsible.
My hero. 924s no start. Checked the solder joints on the DME relay. Resoldered the cracked one. Car starts, saving all kinds of grief, aggravation and money. Thank you. I should figured this out myself as it's the same issue as the fuel pump relay on 240 and 740 Volvos!
Seen lots of Threads on replacing DME relay - your video really helped to simplify the mystery of the relay - will try to fix before replacing. Thanks
Have you tried putting power to it directly to see if it has the same problem if so the solenoid might be getting weak and probably needs a rebuild or be replaced.
Hello, I am taking part in a research project. I could not find almost any information about the "main relay" of Porsche 912. Can you help me with this?
"What is the main relay of 912 L jetronics used for?"
I have not tried that. Do you mind telling me how to do this? I am no experienced mechanic, but I´m eager to learn and work some hours on it every day. Next week I hope that the car make it through the periodic inspection. I´m starting to fall in love with the car...
Thank you very much this video solver my problem. thanks again.
nice video. I have a 85´ 911 3.2 carrera. The starter does not operate every time i turn the ignition switch. in 2 out of 10 times the starter operates and the engine fires. Any ideas?
In my 993, it's in the fuse box up front in the luggage compartment
What year this is for the older 911's this one was a 89
Boos I have one Porsche carrera gts 2009 fault showing p01558 dme control unit faulty but car sometime start what problem what do you think can you replay me
how do you get to the relay to remove it?
Thanks.
Hello I have a 964 1990 with a bad pump where is the pump ! and do you have a photo on it .
+Robert Boxleyan Most likely it is not a bad pump it is usually the relay I would fix that first since it is easy to do and to access
where is the fuse for pump do you have a photo 1990 c 2
I am not sure if it will be in the same location but mine was under the drive seat next to the ecu
Where is the DME relay located ? Thanks.
It is located by the ECU under the drivers seat it takes a 10mm to remove.
nism0silvia Thank you, runs great now!
Ryan Mikulsky
Glad to hear
STOP SNIFFING,,,,,,,,,,,,,,,,,,,,,,are you on something ???
Blow your nose before filming maybe???
STOP SNIFFING,,,,,,,,,,,,,,,,,,,,,,,,,,,,!!! Are you on something ???