Avoiding The FAIL Of My Last LS SWAP *67 Camaro Rear-End Upgrades*
Вставка
- Опубліковано 19 сер 2024
- I bought a 67 Camaro RS for only $6,500 and I'm taking it to LS Fest East in only 6 days.
Now that the Powerglide transmission and the LS2 from J&J Auto Wrecking is ready to go, we're going to try to install it and get everything else ready to go as well. As always, things don't exactly go according to plan. The LS2 is getting the complete Holley EFI treatment and some BRAND NEW HK Wheels as well. To get that power to the ground we're rebuilding the entire rear-end and adding a posi-trac from Yukon Gear and Axle.
EVERY PART TO SWAP YOUR 1st Gen F-Body: www.holley.com...
HK Wheels: www.holley.com...
LS Fest East: www.lsfest.com...
MERCH: shopWatchJRGo.com
Shop Motul: motul.com
---------------------------------------------------------------
Common Questions:
What motorcycle do I ride? A few. Ducati 1198, Honda Goldwing, Honda Grom, Honda Ruckus
What do I do for a living? Make UA-cam videos.
Can you wheelie? No, I suck.
Are you fast? Sort of. I suck mostly though.
Where can I keep up with you off the bike?
Instagram: WatchJRGo
Facebook: WatchJRGo (or JRGo, FB hates my branding)
Do you go to school? College, for 2 classes.
Why do you ride so dangerously? What do mean? I was doing 25.
Do you go to the track? Of course, hopefully there will be videos in the future.
Do you play video games? No, but I might stream N64 Goldeneye at some point. Twitch: WatchJRGo
Are you afraid the police will watch your videos and arrest you? Something something evidence something something warrants and due process of law
#CarRescue #Camaro #67Camaro
This has been one of my favorite builds you've done. I would love to see a full restoration of the paint and interior
Oh it's happening, as soon as it gets back I'm starting over with the frame-off. 💯
@@WatchJRGo Posi-tively BETTER of COURSE!!
Hey Riley is that the moon and Antarctica album cover?
Daegan Jones yes it is!
@@TheVIdeosOnly Nice man that's sick. That's my third place MM album behind Lonesome Crowded West and This Is A Long Drive. Gravity rides everything smacks though its like crack for my ears haha
IMPORTANT - Those mono leaf springs get brittle over time and now that you have LS power and the 10 bolt posi you're going to break those old springs guaranteed. If you have time install multi leaf springs to avoid disaster. Nice build - good luck!
Yup those springs and shackles are gonna twist like taffy. Goneasy on burnouts and after event break the car so you can fix it, axles are gonna twist like taffy. Too....
Seals are gonna leak tooo
You guys are true professionals such as myself. Sitting on the floor in shorts and flip flops working hard. You have more fun tools than I have, but we work the same.
When popping off a rusted rotor once, it landed on my flip flop-clad foot. It was not fun. Now I just keep one of the lugs on.
When you get time, please try to do the "flipping a car in one day" videos again!
I've got one planned! 🍻
@@WatchJRGo Awesome!
@@WatchJRGo Awesome! Keep em coming :D
@@WatchJRGo Buy an altima with a bad CVT and missing front bumper
That's not sludge, that's rear diff fudge. Make Hoovie a cake :) .
Just finished watching you and Tyler with the Ford comparison then this notification popped up
We shot this video and that one yesterday 💯
WatchJRGo putting on some work! 👌🏽👌🏽👌🏽
Hey JR. Awesome build but I thought you would have known better that to torque up ring gear while it was still hot. The bolts wont be 55ftlb when they cools down. Cant wait to see the finished car.
Good job JR. I think what viewers fail to realize is this is not a final build. You are on a time crunch for LS Fest. There is only so much time in day. Got get it together and rolling. Keep up the good work. From Dayton Ohio
SAFETY GLASSES! You ever seen a bearing race EXPLODE! Maybe even a face shield as well!
Wouldn't want to see you lose your eyes, buddy!
I have seen the wheels pull out on a ford van on a busy 6 lane freeway in San Antonio, TX on a ford van. Whole wheel and axle came out at 70mph. Dude managed to stop it without incident and get pulled over. That wheel and axle bounced and wobbled around in heavy traffic from the right lane all the way to median and nobody tagged it! Craziest thing I've seen in a while!
"We almost got to try and start it today" ...........Gas tank laying in the background. HA! Love this series!
You've got some really good friends to have them let you always be using their shops and tools.
Good job. Have been meaning to refurbish my rear diff for years. Just one of those jobs that creates more work as you go on. I did manage the pinion oil seal which was fun. Keep up the good work.
Dude, i love watching all the wild stuff you do. Go in, get your hands dirty, learn along the way...this is what makes for fantastic UA-cam content. I’m hooked, brother. Keep up the great work!
I am glad you changed the axle seals and bearings.
Nice progress. I hope you're planning on some Cal-Tracs, or at least a set of old-school slapper bars. Otherwise those monoleaf rear springs are just going to wrap up when you get on it, resulting in wheel hop instead of smoke. They were notorious for it even at stock power levels, which is why Chevy dropped that design after one year and went with conventional multi-leaf springs for '68.
Hi JR. Just when I was heading for bed you put this video up. Fun to watch. Thanks.
I can’t wait until it’s done this give me motivation to work on my dads 69 camaro
3:13 in, you guys didn't see all the slop in that front pinion? That's where your noise is. A rear end should NEVER clunk like that. I have a feeling they are going to slap it together, send it, and blow it up Like roll smokes diff. Ok. Should watch the whole vid. Good job JR. Little tip, take the ring gear and bearings and put in a 250 degree oven for 30-45 minutes, put the carrier in the freezer overnight. The bearings and ring gear will just drop on like butter.
All I know is it runs perfectly now... and the Rolls ripped the bolts out of the floor that hold the IRS, the diff on it didn't break at all 🍻
@@WatchJRGo I amended my post, looks like you got it good. Did you change the pinion bearings by chance?
After inspecting their build, I'm pretty confident that one will have at least 30 minutes of decent 11s in it, which is all he needs right now. I'd send it too without fear. I was more worried that he implied he had the entire weight of the axles, wheels, tires, and presumably brakes hanging on the axle seals.
But... Same logic applies: It will do a few cool burnouts. So, meh...
after a few days I am recalling how many times the word turn key was used earlier. It never is turn key.
If I could help Watch JR Goes and Joshs work on the rear end of the 67 Camero I would drink the cold Bartle Skeets and pack up the Hash Pipe with Rocky and get all schmoked up.
Helpful hint.. you can always bake parts in an oven to expand. Its better to evenly heat metal to get it to expand
Putting some extra work editing and filming! 👌🏽👌🏽
It might be only 15min but sure it takes a few hours during the day!
How does posi-trac work? It just does son, it just does.
Nobody knows how it works! 😂
It's only Plymouth posis that are a mystery. Science has answers for the other brands.
Honestly I'm four years into a mechanical engineering degree and trying to learn how modern LSDs work makes my head hurt. Insane how somebody came up with this stuff with all the clutches and everything.
@@rvne3959 A simple clutch or cone style LSD is actually really easy to understand. You have friction plates (clutches) held against each other by spring tension from side-to-side. Once the friction exceeds what the springs can hold, the clutches slip and the axles are allowed to move at different speeds like an open diff. That's why it's "limited slip". Something like a true locker doesn't slip at all once it locks up under load. Basic lockers are even easier to understand. Look up something like a Richmond Powertrax and you should be able to follow along from the installation manual.
If you're looking at stuff like a torsen or some of the e-trac stuff, those can be a lot more complex. I'm no expert, but the torsen is basically just a crazy series of hypoid gear sets that are just always fighting each other and are much more difficult to understand without one in your hands.
@@TheBrokenLife I agree regular lsd is pretty easy to understand. When I was in school we had a cutaway of a torsion and I never could figure out how it worked.
I've got a 69 RS, had it since 1978. Love first gen camaros
Permeates Right Stuff doesn’t have much of a shelf life after the applicator is cut. The case of 3oz tubes is a pain to use on the larger gaskets. The pressurized cans aren’t too bad.
Episode 1: “Tuuuuurn Key!”
Today: * pry off rear diff cover* ”Eeeewwwwww What is THAT!?”
Hoovie managed to post a video before you??? **le gasp** Also, shoutout to Jonny for being awesome and always letting you use his shop to get things done. Stand up guy.
That "Balls McGirk" LS2 mated to the 1st Gen 2-spd Powerglide pops helped you prepare is going to destroy that "10 bolt posi" even without a turbocharger added.. 70 was the last year a 12 bolt posi were offered by GM.. but a Ford 9" would still last longer if you plan to do "donuts".
Quad turbos with NOS, bruh. Radical!
That is going to be a crazy high gear set . Open diff , small block ...3.23 or higher . So go with 3.73 or a little higher .
I love your channel man!! Just started watching back when you all bought those 3 cars a few videos back.
Looking good. Hopefully it works out better than the Rolls
Car Ninja: wears safety boots Mike can hammer on all day long....
Jr and Josh: wearing safety flip-flops and manual eye shields :D
I like the beat up paint look with the great interior and "guts"
So excited, this build came outta no where but I’m here for it lmao
Flip flops, flames 🔥 and posi trac
I don't know I probably would have changed out that U-joint as well seems how it is an old probably original but who knows throwing that posi unit in there it may positively break hope not though I want to see a successful burn out with this monster. I think one more failure on the road and it would absolutely break my heart. Haha you guys stay safe stay well and as always God bless
I think you'll be more happy with a more refined driveability and streetable torsen differential.
"A typical open has a 1.1 to 1 bias ratio due to some small internal friction. The non spinning wheel gets 1.1 times as much torque (10% more) than the spinning wheel. The Torsen differential for Camaro SS has a 2.2 to 1 bias ratio, therefore, the non spinning wheel gets 2.2 times as much torque as the spinning wheel. The Torsen will support up to a 2.2:1 torque imbalance before it differentiates (unlike the open), and then will differentiate at the 2.2:1 ratio. With the spool, there is actually a negative torque on the outside wheel in a turn making it difficult to turn in the intended path. This can also occur with spring preloaded limited slip differential under low torque. The Torsen applies a positive torque to both drive wheels in a turn. Another benefit of Torsen: in an aggressive turn, the inside rear wheel loses some traction and the Torsen then biases torque to the outside wheel which tends to pull the car through the turn (instead of sliding sideway). If the rear loses traction and the driver releases the throttle, Torsen biases the engine braking torque to the outside wheel which helps to lessen the severity of a spin-out."
What about that 10th bolt @ 12:21 ? Stripped or lost? Eh, at least it's at 11 o'clock and it's got the cheese wiz on both sides. Ready to see some burnouts!
It was never there, probably from someone messing with it in the past. It's a longer bolt of course because that bracket is supposed to mount there 🍻
Incredible talent, hard work and investment going into these repairs. Makes me want to stick with still under warranty vehicles :: )
Good old powerglides, first gear til 65 mph
You and Tyler have good chemistry together. You and him should do more videos together.
Love these restomod type builds.
A cowl hood wouldn’t be bad, maybe not stock looking, but it would be good to get you around until you figure out a permanent solution. Unless that permanent solution is happening sooner than later lol
5:45 That must be a machinist claw hammer. I like them for pulling out those stubborn rivets!
Good to see that GM know how to write a date properly.
Put hood spacers where it bolts to the hinges import tuners do that. 1.improves engine cooling. 2. You won’t have to spend money on an after market hood. You can find the hood spacers on eBay.👍
Damn Camaro's FLEXIN' w/stance! Just needs fenders to reach over the tires
wearing flip flops while using a torch. Just like my garage lol
Better get the muffler bearings replaced also.
The rear differential is an amazing price of engineering.
You should both axles out when removing the gears unless your replacing seals.
To get a true back in the sixties look, lift the back 4 inches!
What I’m really surprised at is that single leaf rear suspension, I thought only 6 cylinder cars got that. My 69 firebird only had the 350 2 bbl and it had the multi leaf suspension.
Reminds me of the 4 lug 6 cylinder mustang verses the 5 lug v8.
That is a 10 bolt rear. With the extra hp, it needs a 12 bolt. My 65 Chevelle bought new with a 300hp 327 and 4 speed manual came from the factory with a 12 bolt rear diff with an eaton posi.
I have lots of 12 bolt shims left over from a gear change in my 69SS 396 Chevelle back in 1974. I bought a full set from chevrolet before the job.
Also looking forward to the interior finish.
You guys need to get and wear some safety glasses. Especially with that press. I've had things flying using them and the glasses saved my a%^.
You wear safety glasses on your ass?
@@TheFracturedRooster Lmao
I watch your and hooves videos all the time!!!
Rear is gonna go boom. The 8.2’s don’t hold at all. If you wanted a cheap upgrade that would hold you should have picked up a used 8.5 out of a nova and sent it. I’d also be very careful with those old mono leafs. I’d be willing to bet if it’s not already cracked inside the front leaf pocket it will be after your first good burnout.
Wish the shimming process was shown. I could use some visual schooling there.
1st! LOL. Just kidding. I will have to go check out you and Hoovie's video after this. I'm loving the Camaro project.
You really should make a competition on episodes for how many time you have to go to oreillyauto. That would be fun
Saw you on Hoovies, he roasted your sweet truck. Lol.. He is such a goof..lol
The play looks like the yoke to the pinion, you turn the driveshaft and then stop but the pinion keeps going. check the nose and yoke
There’s something oddly primal about two grown men, sitting criss-cross applesauce, hitting something with a hammer.
Go for cowl hood if needed
It’s crazy to see people in the comments telling you how you should spend your money😂
What about limited diff fluid additive to put in gear oil ? Don’t forget that
John Ross why is O'Reilly not a channel sponsor. And if they are awesome. This Camano is going to be so much fun.
I’m loving this build. I hope you re-body that car.
The disappointment of finding you have an open diff is real pain...
my pop tore down a 70 SS Chevelle and took the 12 bolt rear out of it and put it in the '64 el camino when I was like 10 ish, the wheelbase is so wide compared to the stock 10 bolt that he had to cut the quarter panels at the wheel wells to make tires fit
your father butchered a good car for no reason
My neighbor put a 10 bolt from a Camaro under a Vega and didn't shorten the axles. Looked goofy as hell.
After LSfest, Add T-Tops for style!!!
I thought that you were doing a new body? or floors?...ur my fav car guy to watch....love your videos.
More power is always the solution.
Frame twister, easy come easy go.
I would temporarily find a donor hood, and cut out the appropriate holes for the hood to close.
Start wet sanding the body with 320
Ending with 1200 then primer black .
You’ve learned about old GM cars and their low hoods. That’s why there are so many cowl hoods out there. There are other solutions but the cowl hoods are available in steel and bolt right in. That’s said, I don’t want to put one on my Camaro either.
With as many times as you give support to O'Reilly's they should be a sponsor of your channel
He has a business account with them
Wonder if the slop was from the spider gears. Look at how much the carrier moves at 3:10 before the spiders move.....
This better look like something Barrette Jaxon would build when it’s finished
Maybe the crusty brake lines should be looked at too!
Shout out to Josh Hoorah!
that looked like 3/4 inch play to me! :)
Why didn't you use the ICT truck Style braket with the angle gives you so much room
You gentlemen may have hit a legal snag with your build. Those are Kansas antique plates. Kansas law is not going to let you keep those antique plates without you either restoring it to completely stock and original condition, changing to a non-antique plate, or incurring a $10,000 fine. Per Car Wizard who tried to do an engine swap on an antique truck and the antique car law stopped him in his tracks.
What makes you think that those plates are in Johns name? It's highly unlikely that he has registered a car that he pulled from his neighbors house and does not plan on driving on the streets for months.
Write em up Mr Hall Monitor
really don't like that alternator location
When you had the drivetrain & engine out why did you not send the body out to get painted?
I have a 2003 gmc sierra 2500hd 4x4 with the allison transmission and the big block 496 (8100) ... I need help I did a radiator swap on the truck and lost the lower radiator hose clip.... it looks to be about 2-1/2inches and it's a w- clip style .... I need to locate where I can get this w-clip asap please if you can help me locate where I can get one for sure I'd really appreciate it soooo much .....
You should buy a spare set of U joints, They do break.
Time to change the shoe from watch Jr go to Watch JR watch as Josh does all the dirty work
Can you raise the body a little to fit all your new stuff
Seems like we’re pretty close...*CLANG! CLUNK! CRASH!*
Glasses! Where are your glasses JR?
I really like channel. You deserve so much more subs
Setting up the bearing press: Murphy's Law would be invalid were it not for gravity.
No cowl hood!? In my opinion first gen Camaros don't look right unless they have a cowl hood.. but it's your car. Were the axles worn? did you replace the outboard axle bearings?
Nice mask!! I’ve been waiting and watching. Thank you!!!