Hello. I have BMW e46 330xd 2002 with oem suspension. I have a strut mushrooming problem. I think to use strut reinforcement plates and strut bar, but strut mount bolts are very short. I see on e36 from the video these bolts are long. Can you tell how you did it? Sorry for my english. :)
Where did you get your oil filter , I have a 93 m50 b25 tu and wanna make sure I get the correct one I don’t trust advanced auto to give me the right one with gaskets included lol
Havoline actually makes Synthetic and Conventional however on a old motor that you have no idea what oil was previously used it’s best to use conventional. If you switch to synthetic it usually causes leaks from the old seals and I didn’t want to add to that problem.
It looks like you made the mistake to add the O-Ring at the base of the filter cap. You are actually supposed to replace the O-Ring inset to the threads. People have oil leak issues doing it your way, check out what I'm talking about. Maybe I'm misinformed?
If you track a E36 you know that everyone does this. These engines suffer from oil starvation under high G if you don’t overfill them. I will not make more oil pressure. It just keeps oil at the pickup so you don’t starve the engine. If you drive normal sure just keep it at factory level but this is well know in the Motorsports scene.
Box is ok. But the 2qt marks are inaccurate compared to a plastic jug. When FedEx destroys the boxes in shipping, good luck using any of the features for spout, handle and measure. Only good if you need 6 qt fill and want to save a buck
![FAST BMW E36 Engine Teardown [Pt1]: How to Remove VANOS and Cylinder Head (m50 m52 s50 applications)](http://i.ytimg.com/vi/AhUvqwcNGYU/mqdefault.jpg)
The part where you have to clean out the oil pan after pouring the old oil in a container is definitely my favorite 😂
Right lol 🤣
Mine too... LOL
Owwwww fancy intro. Cool that the box has A handle. Also, the engine looks clean as new.
I didn’t like e36s until I picked up an m3 vert on Tuesday. They’re growing on me
Dude I know! I was kinda like ehh.... Then got this and I absolutely love it with all the work Ive put into it as of now.
Love the FreE36 project, upload more vids please🤘🏼
Will do!!
Hello.
I have BMW e46 330xd 2002 with oem suspension.
I have a strut mushrooming problem.
I think to use strut reinforcement plates and strut bar, but strut mount bolts are very short.
I see on e36 from the video these bolts are long.
Can you tell how you did it?
Sorry for my english. :)
Just a set of eBay coilovers that have long bolts
Where did you get your oil filter , I have a 93 m50 b25 tu and wanna make sure I get the correct one I don’t trust advanced auto to give me the right one with gaskets included lol
6.9 quarts
Wtf is quarts
@@Exekutioncro wtf is a kilometer
@@Vrtuned ask 95% of the world
I'm actually surprised you went conventional oil. Synthetic is so cheap now Amazon synthetic is really good
Havoline actually makes Synthetic and Conventional however on a old motor that you have no idea what oil was previously used it’s best to use conventional. If you switch to synthetic it usually causes leaks from the old seals and I didn’t want to add to that problem.
Why 10w 40 and not 5w 30
Manufacturer recommended, 5w-30 for winter or cold climates, 10w-40 for hot climates, it has a diagram if you still have the service manual.
Whats that watch you wear? Looks nice :D
Tag Heuer Carrera
Is there a top or bottom indicator on the oil filter? Or it doesnt matter?
Doesn’t matter but I usually put the part number up.
What torque wrench did u use?
Mac Tool 3/8" Drive Electronic Angle Torque Wrench 5-100 ft-lbs. TWXA100FD
Mac Tool 3/8" Drive Electronic Angle Torque Wrench 5-100 ft-lbs. TWXA100FD
Thanks that's badass
Hey thanks blake
That oil container is wild
I know I love it actually. The fact that Oil doesn’t run all the way down the side and is absorbed into the cardboard is super cool.
It looks like you made the mistake to add the O-Ring at the base of the filter cap. You are actually supposed to replace the O-Ring inset to the threads. People have oil leak issues doing it your way, check out what I'm talking about. Maybe I'm misinformed?
Actually, it's not a good idea to go over a little at all. That's how you blow seals. Too much oil pressure = bad things
If you track a E36 you know that everyone does this. These engines suffer from oil starvation under high G if you don’t overfill them. I will not make more oil pressure. It just keeps oil at the pickup so you don’t starve the engine. If you drive normal sure just keep it at factory level but this is well know in the Motorsports scene.
@@BlakesGarageu promise? pinky?
@@eskimo330 yeah, pinky it’s the e36 way.
@@BlakesGarage ur right man tried it out yesterday. thx
Man says milky build up that is mainly a sign of a faulty PCV/ ccv system m52 head gaskets don’t go unless overheated
Well, this was 100% a cracked head and multiple spots
Whoever is saying that is trying to sell you a bad motor or car
How many liter oil capacity of E36 m52b20 ?
6.2 quarts
@@gaijin.3644 thanks
I like it
Box is ok. But the 2qt marks are inaccurate compared to a plastic jug. When FedEx destroys the boxes in shipping, good luck using any of the features for spout, handle and measure. Only good if you need 6 qt fill and want to save a buck