I don't know which is most amazing, the parts that are created or the machines that create the parts. Or maybe the minds that create the machines that create the parts. I'm impressed with all of them.
Hi, Just wanted to let you know, that the Time this Video was uploaded exactly These Machines got flooded due to a very heavy rain and further increasing River floods.
Yes i saw that too, maybe they got people with machines that take care of it. I have been into shops were i sneezed black by just walking through them. Some hasn´t even got fans for sucking out that evil white smoke.
I did my apprenticeship at a place called Power Plant gears ltd in West drayton UK. They manufactured massive gears and gear drives just like this. It shut in the mid eighties so there was no CNC machining. After the gears were cut they would be hand scraped and lapped to perfectly bed the gears together. Our main gear cutting machines were Schiess from Germany. Power Plant claimed to be the pioneer in helical gear cutting. They had been going since 1903 and at one time actually built gear cutting machines.
If a company didn't make the transition to CNC then they folded up. You can't compete with CNC. I mean just look at it. These are basic machining centers here too. Nothing too fancy. No 5 axis or what have you.
I'm not a machinest but I do enjoy watching videos on cnc machining it's amazing how accurate it does it work with all the steel moving as fast as it does and stopping exactly where it's told to stop. But I do have a question @ 6:40 how does the tool know where to line up when cutting the groove for the threads with each pass without it starting a new set of grooves I find interesting how fast the material is spinning yet the tool finds the same groove all the time.
In a CNC-mill like this one, it is programmed and based on position, that means that the part and cutting tools knows exactly where it is at at all times. When programing it, you can see the part getting cut in a simulation, what cutting tools to use, speed, and so on.
Perfectly correct and it should also be not that, the machine can create a different thread groves in situation which we dismountle the piece and mount again (due to change of reference point).
The machine has sensors in the spindle so it knows precisely what degree and velocity the spindle is at all the time. There are PID loops going on. The machine controller (the electronic control unit that runs the CNC machine) controls the spindle and the lead screw of the machine. So it can coordinate all of the movement. The spindle is the A axis. The lead screw and carriage are X and Y Computers are idiot savants at math too. They're just supernaturally good at it. Counting and calculating is what they do. What's really going on when you get into the nitty and gritty of it all is nothing short of amazing. The machine is taking all kinds of parameters into consideration while it's executing operations. What it can do, what it's been asked to do, etc. It's pretty crazy.
CNC programming technology is already very advanced, but because modern society is improving so quickly in terms of technology, so are the technological developments. But these developments are closely related to the country, the country's decisions will affect the industrial progress and technological development of the entire country, and this influence will gradually spread over time, and will eventually form a huge wave.
The subtext in the section starting at 3:45 and going to 7:09 about CNC programming is pretty much spot on. You have to be a good manual machinist before you can become a good CNC machinist/programmer. As a member of the last generation of machinists trained on manual equipment before I even got close to a CNC machine, if you don't know how to machine a part manually, you're going to be clueless about how to properly program a CNC machine. The computer will not save you.
My man. I got a small CNC router. Then a big heller, índex lathe, and a EDM. The only experience I have on manual machines is watching abom79. And It is defiantly possible to jump right to CNC machining. The power and speed of a modern machine is so high just fell on a manual machine cannot prepare.
There was a time when I would have agreed with you. Just watching that grooving tool at 5:07 proves that a manually created program will have wasted motion. Look at how long that tool cuts air before it reaches the material. The turning module in GibbsCam would never create a toolpath with that much air time. We continuously track the material state so that the tool is positioned within a few thousandths of the stock to eliminate unwanted motion. CNC programming with today's technology could never be duplicated by hand. It's just not possible.
Very nice industry work.... CNC machine work good experience and good opportunity for ITI, diploma, bachelor mechanical engineer ... nice sweet technical industry works....hmmmm
Hey then you should be aware about what humans can do! And you should also do something great for humanity. Ok if you dont know what humans can do, then how can you forget about rockets . It is since 60s.
Machines are the test of motions and properties. It's a test of materials. What level can be used to build that equipment. Precision machinist How, it has standards it's either miniature or enlarge or normal size. That's an auger in my field. The diamond tip cutter. As I've mentioned it's all in the package but some of the materials are expensive.
was a gear machine operator for many years(hobber,shaper,gear grinder and cnc shaper) mostly aerospace parts, the real money was putting a spline on a part that was timed to some feature on a shaft 90% of the time this was done so that when it was assembled it could only be put together one way...IE. make it idiot proof!
@@mayke8623 в основном используется косой зуб и нарезается зубонарезной фрезой. Есть способ и на зубодолбежном станке. Все это ещё от советского времени пришло и менять смысла нет. Но этот вид зуба радиусный. Возможно и технологические требования у него другие. Вот и интересно было как такой вид шестерен изготавливают. Правда я не пойму сарказма по поводу России. И в Китае и в Индии и даже в любимой многими Америке также используют косозубые шестерни.
I don't know which is most amazing, the parts that are created or the machines that create the parts. Or maybe the minds that create the machines that create the parts. I'm impressed with all of them.
က က နေ
What about the speed
That must be solid steel I assume. I can’t even cut butter that fast
be amazed by the one who created it all
Does the blonde really work in the factory I dont think so.
I'm mesmerize not only by work produced, but the machines put together to do the work, and the sound was nice as I watched.
Give it time, you’ll hate it soon enough...
@@bloibl916 0
That last one was incredible. All those tools and processes. Wow, what will the next 10-20 years bring.
unemployment due to automation
@@paulruesink8917 fuckin true
Well, Not that much - most of These got destroyed due to overflooding.
Although been an electronic engineer I was amazed with the dimensions, speed and flexibility. Big and fine engineering !
I just love how this video has the most gangsta music playing in the background 😄
That's amazing I loved that.. I love world of manufacturing ♥️
I'm a CNC machinist beginner, this is my favourite profession ♥️⚙️
mashinist beginner durak
You are making great fabricants I call it the spitzpoint-industry and worked also as an operator.
Observation, takes alot of smart people working together to make this happen.
This much accuracy..pata ne kon se insan hain wo jinka damag is hadd tk pohnchaa...sssuperb
Hi, Just wanted to let you know, that the Time this Video was uploaded exactly These Machines got flooded due to a very heavy rain and further increasing River floods.
Most amazing thing about this video is how clean this shop is. Forget the making of the parts, look at that floor!!!!
Yes i saw that too, maybe they got people with machines that take care of it. I have been into shops were i sneezed black by just walking through them. Some hasn´t even got fans for sucking out that evil white smoke.
Absolutely incredible...! Congratulations on the magnificent work. Greetings from Portugal: João Carvalho.
The accuracy blows my mind.
đón chờ những ca khúc tiếp theo của Phúc, càng nghe càng thích giọng ca của Phúc ❤
Informative. Useful. Calming. Inspiring. Life-changing. Enjoyable. Heart-warming. Other.
I did my apprenticeship at a place called Power Plant gears ltd in West drayton UK. They manufactured massive gears and gear drives just like this. It shut in the mid eighties so there was no CNC machining. After the gears were cut they would be hand scraped and lapped to perfectly bed the gears together. Our main gear cutting machines were Schiess from Germany. Power Plant claimed to be the pioneer in helical gear cutting. They had been going since 1903 and at one time actually built gear cutting machines.
If a company didn't make the transition to CNC then they folded up. You can't compete with CNC. I mean just look at it. These are basic machining centers here too. Nothing too fancy. No 5 axis or what have you.
Wow, the accuracy you need to have to cut those gear teeth while the piece is in motion at 0:50 . Insane, I didn't even know that was possible
It's been possible for a long time. Today it is accessible. The thing is it's still a lot to wrap your head around.
это кино, так чисто в производстве с металлообработкой быть не может но интересно. ЛАЙК!
Unusually good computerized music for a tech video
I'm not a machinest but I do enjoy watching videos on cnc machining it's amazing how accurate it does it work with all the steel moving as fast as it does and stopping exactly where it's told to stop.
But I do have a question @ 6:40 how does the tool know where to line up when cutting the groove for the threads with each pass without it starting a new set of grooves I find interesting how fast the material is spinning yet the tool finds the same groove all the time.
In a CNC-mill like this one, it is programmed and based on position, that means that the part and cutting tools knows exactly where it is at at all times. When programing it, you can see the part getting cut in a simulation, what cutting tools to use, speed, and so on.
@@olehoiii as a former machinist i endorse this explanation.
Perfectly correct and it should also be not that, the machine can create a different thread groves in situation which we dismountle the piece and mount again (due to change of reference point).
The machine has sensors in the spindle so it knows precisely what degree and velocity the spindle is at all the time. There are PID loops going on. The machine controller (the electronic control unit that runs the CNC machine) controls the spindle and the lead screw of the machine. So it can coordinate all of the movement. The spindle is the A axis. The lead screw and carriage are X and Y Computers are idiot savants at math too. They're just supernaturally good at it. Counting and calculating is what they do. What's really going on when you get into the nitty and gritty of it all is nothing short of amazing. The machine is taking all kinds of parameters into consideration while it's executing operations. What it can do, what it's been asked to do, etc. It's pretty crazy.
Maravilhosa qualidade lindo oportunidade unica .. Obrigado pelo video.. CNC é magico..
AInda mais qundo se trabalha com maquina convencional
What a technology these all found by human beings so you people are great
Totally hooked watching these videos. Fantastic 👍
CNC programming technology is already very advanced, but because modern society is improving so quickly in terms of technology, so are the technological developments.
But these developments are closely related to the country, the country's decisions will affect the industrial progress and technological development of the entire country, and this influence will gradually spread over time, and will eventually form a huge wave.
ギヤは男のロマンです。
Carbide tips have changed everything
Cemented carbide cutting tools have been around since the late 1920's.
Отличная работа!!! Молодцы!!! Great job!!! Well done!!!
The subtext in the section starting at 3:45 and going to 7:09 about CNC programming is pretty much spot on. You have to be a good manual machinist before you can become a good CNC machinist/programmer.
As a member of the last generation of machinists trained on manual equipment before I even got close to a CNC machine, if you don't know how to machine a part manually, you're going to be clueless about how to properly program a CNC machine. The computer will not save you.
My man. I got a small CNC router. Then a big heller, índex lathe, and a EDM. The only experience I have on manual machines is watching abom79. And It is defiantly possible to jump right to CNC machining. The power and speed of a modern machine is so high just fell on a manual machine cannot prepare.
There was a time when I would have agreed with you. Just watching that grooving tool at 5:07 proves that a manually created program
will have wasted motion. Look at how long that tool cuts air before it reaches the material. The turning module in GibbsCam would never
create a toolpath with that much air time. We continuously track the material state so that the tool is positioned within a few thousandths
of the stock to eliminate unwanted motion. CNC programming with today's technology could never be duplicated by hand. It's just not possible.
Chris brother let see your video and show us few tricks I’m looking forward to see your face on UA-cam
De grootste bevel gear wat ik ooit gezien heb bij ATA gear in Tampere Finland, 4 mtr diameter
And the sales Manager will say: "The main thing is not to make a part, but to sell it."
Bcz non Technical people have superior power and don't underestimate the power of fools in large groups!!
He is right. Can’t pay workers with gears
Brings back memories of repairing these machine tools before I retired from Falk corp.
Very nice industry work.... CNC machine work good experience and good opportunity for ITI, diploma, bachelor mechanical engineer ... nice sweet technical industry works....hmmmm
Nice gear production units
Wow beautiful video and very nice music..
"no computer will ever have the instinct that's inherent to humans" lol that's cute to believe that.
Amaging huge gear production and cnc machine process good veideo....
Why Face milling is not usually considered over face hobbing? Is there any difference in terms of tooth load carrying capacity in both the processes?
Койил ома устаси устада барибир
Je suis un tourneur vous faites des travaux extraordinaire magnifique
wow i can't imagine how could humans build like this machines
Hey then you should be aware about what humans can do!
And you should also do something great for humanity.
Ok if you dont know what humans can do, then how can you forget about rockets . It is since 60s.
Much better than my hand file))
Amazing, it is so big machine.
Bu makineleri yapanları tebrik ediyorum. Emeği geçen herkesi.
"no computer will ever have the instinct that's inherent to human" yeah I know some machine learning engineers who would like to have a word, lol
I can see the first one, well if the geometry lines up then yea this could totally manufacture this thing...
support to you friend
astonishing and ONE insert, for facing, sliding and screw cutting
I like it so much.Thanks for sharing
Wowww biggest cnc turning
Nice video CNC machine
dammmmm ,all that machining used to be done by hand and by skilled journeymen .....
Gracias por los videos. No me imaginaba el procedimiento
This plant is amazing in any country
I like this job so much
8:57 This is bad for this high level production imo xD
You're right. That drill flexing, ouch ! Maybe its a non critical dim.
@@bonesshed. Critical or not, it's still allows space for unwanted buildup.
From iraq well done
2:35 Now that guy is the head of the CNC.
Beautiful Beautiful machines👍
tết ở nhà coi hài là đúng rồi đỡ ra ngoài
We are using the same size of gear at our coal mills, to drive the mill drum.
I so wished I could volunteer there.
Biggest CNC i've ever seen.
Machines are the test of motions and properties.
It's a test of materials.
What level can be used to build that equipment.
Precision machinist
How, it has standards it's either miniature or enlarge or normal size. That's an auger in my field.
The diamond tip cutter.
As I've mentioned it's all in the package but some of the materials are expensive.
Wow😅😅😅really great amazing modern machine 😅😅😅h-technology. . .
Loved it so so much!!!
One thing all these machining videos have gotten down to a fine art is the ability to find the most annoying music to add in to the video.
径がデカすぎるとマイクロメーターの当たり面も広くなるから測るのむずいよね😁
Que chulada 🤗🤗🤗 🇲🇽
So great manufacturing.
You mean the tools. Of course yes.
the music started very well, then nose dived.
Love her lasses safety glasses! Cheers! Good job!! ;-)!!
Success story
woow amazing, super work
So satisfying!!
Thanks Very Much, Here I also share for making drawing of spurgear in Autocad
Some works are so big, the tooling machine is the moving part
Galindo
Man... do i need miss the job.. Had a tear in my eye at 04:00 . Note to self: save up for at least a manual lathe
Pabrik pabrik yang cangih dan muntakhir......
Amazing technology!!!
I so much wanted to see this ! Thanks a lot for posting this video !
does that bird really work there .... lol
Amazing cnc CAN TACKLE ANY ANGLE !!!!
Good👍👍❤❤
Wow Amaizing
Amazing machine to cut gear teeth. A high level of automation.
Good engineering
Nice video, thank you for sharing.
Thanks for watching.
Amazing CNC Machine.............
Sure, I love them
was a gear machine operator for many years(hobber,shaper,gear grinder and cnc shaper) mostly aerospace parts, the real money was putting a spline on a part that was timed to some feature on a shaft 90% of the time this was done so that when it was assembled it could only be put together one way...IE. make it idiot proof!
Вот оказывается как делают эти хитрые шестерни.
А в России по сей день на долбежном станке!)😁
@@mayke8623 в основном используется косой зуб и нарезается зубонарезной фрезой. Есть способ и на зубодолбежном станке. Все это ещё от советского времени пришло и менять смысла нет. Но этот вид зуба радиусный. Возможно и технологические требования у него другие. Вот и интересно было как такой вид шестерен изготавливают. Правда я не пойму сарказма по поводу России. И в Китае и в Индии и даже в любимой многими Америке также используют косозубые шестерни.
I like videos . Thank you for sharing let's chat with you
Very good job sir 👍🏻👍🏻👌🙄👍🏻🙏🏼❤️🥀👍🏻🚜🚜🚜
Small tip radius tools need constant nonitoring as they wear fast
How was all.of these done without the machining technology of these way back in the day. For example 1895 or the 1920's
блондинка из порнухи полюбому актриса))))
\
freaking amazing ..
i cannt imagine all that is done by a CNC ,nice result man
لَقَدْ أَرْسَلْنَا رُسُلَنَا بِالْبَيِّنَاتِ وَأَنزَلْنَا مَعَهُمُ الْكِتَابَ وَالْمِيزَانَ لِيَقُومَ النَّاسُ بِالْقِسْطِ ۖ وَأَنزَلْنَا الْحَدِيدَ فِيهِ بَأْسٌ شَدِيدٌ وَمَنَافِعُ لِلنَّاسِ وَلِيَعْلَمَ اللَّهُ مَن يَنصُرُهُ وَرُسُلَهُ بِالْغَيْبِ ۚ إِنَّ اللَّهَ قَوِيٌّ عَزِيزٌ
English manufacturing is amazing the best and it shows there
Very nice selection 😍