Glad to see I’m not the only one that wants a bigger barricade stop on an ACC. I wish gray ops would make one with a much shorter angled section or have the stop drop straight down from the attachment point.. Let you get the attachment point right up against the magwell. That way you would still protect the mag without taking up much rail space. For the rare times I want a plate and attached bag combo I’d prefer not to have to take the barricade stop off to make it usable. I’ve thought about drilling and tapping the magwell so I could attach a stop plate directly to it but I don’t know how to instal Heli-Coils and I don’t trust threading raw aluminum. I’m gonna have to look into that chicken wing. Always happy to learn about something new.
@@bankspressley7624 I do shoot a CZ, it is possible to shove one with an extended mag into a bag on a barricade hard enough to torque the mag and cause some feeding issues. L3I 13 round mags, ACC premier (gen 1), AG GC schmedium heavy fill… even with the aluminum magwell and spacer from DIP, I’ve done it on more than one occasion. I can do it with factory mags too if I have extensions on them. All my rimfire bolt guns are CZs.
I bought some accessories from Nosponsor thumb rest and etc few months ago because of this video. But I can’t find the website I believe I am writing wrong can you let me know the link please or website. thanks brother. I love your channel.
What made you go for the 25” barrel? Performance? Balance? Both? Curious as I’ve been tempted by one of the new MPA pro rifles which is based on the voodoo action but has a range of barrel lengths.
I’d say she deserves whatever she wants. If she wants a CZ then Matt should get her the ultimate CZ for her. If she wants a Vudoo she should get to spec it out. Or maybe she wants a Rim-X. Also, Matt has a Razor Gen III on his rimfire and his centerfire. So since Dore only shoots rinfire maybe she should get a Tangent
Any chance youd be willing to do a video on some 5rd groups on paper at 50, 100 and 200? It would be neat to see what a rifle like that is capable of with a talented shooter compared to what we see on our personal targets.
I have the same anitcant send it level and also bought the same bracket for vertical attachment but when i was placing it in my mind thats giving u a vertical level instead of horizontal one is it not? So it would only be telling u if the butt is higher or lower then the barel tip whereas horizontally the send it level would be squaring u up for your gun laying to one side or the other. im no pro so if u tell me it does both vert and horizontal at the same time somehow i will believe u cause ive watched u shoot before but it just doesnt make sense to me. Basically like building a porch and never putting a level on your horizontal boards and only using it on vertical ones. U can be in line vert and completely out horizontally just thought side to side was more important then rifle butt being higher or lower. U got a actual bubble also so do u use the bubble for horizontal or when the lights on u simply look for the green light.? Id much rather have it vert so its out the way but felt like the rifle being canted side to side was more of a problem then holding the buttstock higher or lower. Really got me wandering.
@heyjohnson5535 the send it level automatically detects level at 90 deg intervals so you can mount it either side or up/down. It’s all in the same axis to the rifle, it has a gyroscope inside that detects level and orientation. It also has a calibration setting so you could even mount it on an angle and still level it out with the lights.
@@Womfat no crap i read my instructions how to connect it but i havent gone through them completely. The word gyroscope explained everything thats the piece of tech it needed in my mind to be able to do it that way. That really pumps me up cause i had used it as part of my leveling system when i was putting my scope on my newest DPMS build and was worried. I got a scope leveling kit from same comp send it got anounced to me from paramount tactical but they do long range classes in maryland i believe so been using some of their techniques i hadnt yet acquired. The send it being one of them.tha ks for the info buddy thats awesome keep up the fire with those guns your sick with it
@@Womfat whats your longest 22 rimfire shot and donu load your own ammo including 22 rimfire for your competitions? If u dont reload 22rimfire whats your go to comp ammo. I havent shot 22 in a long time use to groundhog hunt with it as a kid and always tried to get cci felt like was always a more consistant load but wondered what u used
I don’t think the lot picky is due to 14 twist. Most likely its the barrel make/finish . I have a benchmark 15 twist and is not lot picky at all , and i had two 16 twists from bartlein were VERY lot picky, and a new Muller 16 thats is not lot Picky ..
Yeah it could be a ton of different factors. I don’t think a single person could ever do a proper test of twist rate differences without an incredible amount of resources and testing facility.
Definitely due to faster twist rate. Proven at lot test centers... which recommend 16 twist over faster twist rates. I have a video on this and what the specialist stated about this 130+ year old cartridge at the Lapua Test center
Great to hear about this new one. If you would also do Dory’s CZ setup.
She has something special coming that will be covered in a future video
Glad to see I’m not the only one that wants a bigger barricade stop on an ACC. I wish gray ops would make one with a much shorter angled section or have the stop drop straight down from the attachment point.. Let you get the attachment point right up against the magwell. That way you would still protect the mag without taking up much rail space. For the rare times I want a plate and attached bag combo I’d prefer not to have to take the barricade stop off to make it usable. I’ve thought about drilling and tapping the magwell so I could attach a stop plate directly to it but I don’t know how to instal Heli-Coils and I don’t trust threading raw aluminum.
I’m gonna have to look into that chicken wing. Always happy to learn about something new.
@@bankspressley7624 I do shoot a CZ, it is possible to shove one with an extended mag into a bag on a barricade hard enough to torque the mag and cause some feeding issues. L3I 13 round mags, ACC premier (gen 1), AG GC schmedium heavy fill… even with the aluminum magwell and spacer from DIP, I’ve done it on more than one occasion. I can do it with factory mags too if I have extensions on them. All my rimfire bolt guns are CZs.
“New rifle build here even though it was just meant to be a barrel”
You sir, are a legend! 😂
Its all about the experience behind the tool. 👍😄
loving the camo job
I bought some accessories from Nosponsor thumb rest and etc few months ago because of this video. But I can’t find the website I believe I am writing wrong can you let me know the link please or website. thanks brother. I love your channel.
Matt, do you have a link for the thumb rest? I’ve tried searching for it and I am coming up empty. Thanks.
Ditto. "Nosponsor"??
Get em at gong joe.
He sells his stuff in canada through gong joe, you can also contact him on IG
What made you go for the 25” barrel? Performance? Balance? Both? Curious as I’ve been tempted by one of the new MPA pro rifles which is based on the voodoo action but has a range of barrel lengths.
I find good results with longer barrels and it balances the rifle nicely for PRS
What is the height on the optic mount. Did you get the medium 1.26 or high 1.54? And how much forehand weights did you need to balance the rifle?
Mount is 1.26” and I have three internal weights
Congratulations man, killer rifle build
Thanks Joe!
Hell yeah!
So when's D getting her own Vudoo? I mean c'mon man! She deserves one!
I’d say she deserves whatever she wants. If she wants a CZ then Matt should get her the ultimate CZ for her. If she wants a Vudoo she should get to spec it out. Or maybe she wants a Rim-X.
Also, Matt has a Razor Gen III on his rimfire and his centerfire. So since Dore only shoots rinfire maybe she should get a Tangent
She has something very special coming that will be covered in the near future
Is that bipod the MDT-106292 and is the turret on the Razor modified so u dont have to pull up before u turn?
it's the PRS short model, and yes
What MOA do you recommend in the base as well as the scope mount?
I run a 30moa base, you can run much more if your optic allows it though. I had 60 on another rifle..
Did you use the different spring for the +3 mag extension? or just the original one?
Same spring for even the +5
Does anyone in NRL 22 use Bartlein, Krieger, Brux, or any of the top barrels used in PRS, F-Class, or Benchrest?
who makes the razor gen 3 elevation spacer so the turret doesnt lock?
I had the lock in the elevation turret removed so it can be dialed in the down position as well 🤙
What is the total weight of your setup?
Do they make this in .17 HMR?
How call your timer??
It’s the sportcount timer with XLR mount
What contour is the barrel? Looks heavier than your Shilen.
Good point I forgot to mention, it is a lightly heavier profile, about a 1” at the muzzle. It was also cerakoted by Kenny in a titanium colour
Any chance youd be willing to do a video on some 5rd groups on paper at 50, 100 and 200? It would be neat to see what a rifle like that is capable of with a talented shooter compared to what we see on our personal targets.
Cannot seem to find "No Sponsor". Spelling maybe... Can you post a link?
His IG is @no_sponsor_3dprint
Hey Matt wondering wot is your weight of the rifle? Thx
It’s about 23lb
@@Womfat do u swich evrytime between guns on the acc chassis?
@@Kr1stof1987 no, I have a chassis for each
I have the same anitcant send it level and also bought the same bracket for vertical attachment but when i was placing it in my mind thats giving u a vertical level instead of horizontal one is it not? So it would only be telling u if the butt is higher or lower then the barel tip whereas horizontally the send it level would be squaring u up for your gun laying to one side or the other. im no pro so if u tell me it does both vert and horizontal at the same time somehow i will believe u cause ive watched u shoot before but it just doesnt make sense to me. Basically like building a porch and never putting a level on your horizontal boards and only using it on vertical ones. U can be in line vert and completely out horizontally just thought side to side was more important then rifle butt being higher or lower. U got a actual bubble also so do u use the bubble for horizontal or when the lights on u simply look for the green light.? Id much rather have it vert so its out the way but felt like the rifle being canted side to side was more of a problem then holding the buttstock higher or lower. Really got me wandering.
My dude, regardless if you mount it horizontally or vertically, it only does left to right cant.
@heyjohnson5535 the send it level automatically detects level at 90 deg intervals so you can mount it either side or up/down. It’s all in the same axis to the rifle, it has a gyroscope inside that detects level and orientation. It also has a calibration setting so you could even mount it on an angle and still level it out with the lights.
@@Womfat what he said
@@Womfat no crap i read my instructions how to connect it but i havent gone through them completely. The word gyroscope explained everything thats the piece of tech it needed in my mind to be able to do it that way. That really pumps me up cause i had used it as part of my leveling system when i was putting my scope on my newest DPMS build and was worried. I got a scope leveling kit from same comp send it got anounced to me from paramount tactical but they do long range classes in maryland i believe so been using some of their techniques i hadnt yet acquired. The send it being one of them.tha ks for the info buddy thats awesome keep up the fire with those guns your sick with it
@@Womfat whats your longest 22 rimfire shot and donu load your own ammo including 22 rimfire for your competitions? If u dont reload 22rimfire whats your go to comp ammo. I havent shot 22 in a long time use to groundhog hunt with it as a kid and always tried to get cci felt like was always a more consistant load but wondered what u used
Why don’t you try the Canadian Ultimatum Deuce?
They are having supply issues
She’s a beauty though thanks for the info.
Great build but you hurt my heart when you said 0.7 at 50 was "pretty bad". I'm like, "Damn son..." :-)
How do you get Kenny’s stuff?
I have it imported up, not too bad to do
We have sent over 80 rifles to Canada currently 🤙very easy streamline process. Our shop recommends Borderview
I contacted Desert Precision and they said they don’t build Vudoo rifles. Do you just get the barrels from him or does he build them special for you ?
This vudoo was the last one they did. They stopped offering it
@@EagleEyeShooting
Rough Cost and timeline on RimX barreled action ?(your choice of barrel)
I don’t think the lot picky is due to 14 twist. Most likely its the barrel make/finish . I have a benchmark 15 twist and is not lot picky at all , and i had two 16 twists from bartlein were VERY lot picky, and a new Muller 16 thats is not lot Picky ..
Yeah it could be a ton of different factors. I don’t think a single person could ever do a proper test of twist rate differences without an incredible amount of resources and testing facility.
waiting for Kenny to weigh-in on this discussion
@@John-uo1qfhe’s publicly posted that he doesn’t recommend faster twist barrels and favours the 16T. All his in house 22LR barrels are 16T I believe.
@@Womfatagreed , many different things contribute to lot tolerance; great rifle and awesome content as always
Definitely due to faster twist rate. Proven at lot test centers... which recommend 16 twist over faster twist rates.
I have a video on this and what the specialist stated about this 130+ year old cartridge at the Lapua Test center
You wouldn't need the barricade stop if you were running your KRG C4 😂
This is not a lie
Dory smoked him with a base rifle so he went out and bought a new rifle. 😂😂😂😂
This was actually the rifle I was using when she spanked me 😭
Man you’re splitting hairs on these barrels, PRS is not F CLASS
You’re right
DANG NICE !!!!
You must have a good in with Kenny, I waited 11 months for my gun. 🥲