How to Make a Multi-Layer Stencil (IN-DEPTH TUTORIAL)
Вставка
- Опубліковано 4 лют 2020
- We breakdown how to create a multi-layer stencil! We used a combination of Photoshop and Silhouette Studio to create the stencils. We then use a Silhouette Cameo to cut the vinyl. Steps also included are breaking down layer in Photoshop on how to seperate each color onto an indiviudal layer to create your own multi layer stencils.
LIST OF MATERIALS USED IN THIS VIDEO:
Silhouette Cameo (Vinyl Cutter)
➢amzn.to/3843uJx
FDC 3700 Glitter Vinyl
➢ amzn.to/2twq0vG
Oracal 811 Vinyl
➢ amzn.to/2UsvsuF
Angelus Paint Supplies! (Support the channel with our LINK)
➢angelusdirect.com/DCF10
The DCF Experience! (Our custom course)
➢www.dejesusinc.com/course
Our Sneaker Stencils!
➢ etsy.me/3QE5Ghx
Contact Me!
➢ contact@dejesusinc.com
➢ (773) 833-0388
Materials we use!
Table top Airbrush Booth
➢ amzn.to/2UnqgoW
The Brushes we use
➢amzn.to/2H3bdxD
The BEST Airbrush
➢amzn.to/39M9gCQ
Detail Sander
➢amzn.to/2DXEUgx
Sandpaper Pack
➢amzn.to/2VUebLS
Preferred Tape
➢amzn.to/3aBg0C3
Scotch-Brite Pads
➢amzn.to/2VOE2Vz
My Favorite Finisher (Matte 4-Coat)
➢amzn.to/3sPplkh
Silhouette Cameo (Stencil Cutter)
➢amzn.to/3N69eK7
***********************************************************************
Welcome to the DCF UA-cam channel! Our goal is to create a community around custom sneakers. We want to provide this community custom sneaker tutorials, sneaker photography tips and tricks, custom sneaker discussions, and overall providing a real value to fellow sneaker customizers. We hope by watching our videos, you're able to learn something and improve!
- Dillon & Jason
#multilayerstencil #shoestencils #dejesusstencils - Навчання та стиль
Thank You!! 1. For using easy to understand language. 2. For creating the example while showing the in software steps. 3. For not being afraid of "competition" !!! This is why you guys are the best!!
Thanks for your longtime support and encouragement Christian 🤙
Thank you so much for making all of your videos. I appreciate all of your time that you put into sharing your knowledge for other fellow artists. Keep up the great work!
Had to drop this one for #toothpickgang, 100k is coming fast and we can't thank you guys enough!
DeJesus Custom Footwear #toothpickgang
As a new subscriber, I actually like the long length videos. They go into better detail and makes it easier to learn how to do it properly. I actually found your channel from first coming across Marco, but I find your channel way more informative and straight to the point (rather than just watching someone just paint a shoe). Thanks so much for sharing your knowledge. Look forward to more vids!
I’m a special effects artist for film/tv mainly for creature effects BUT THIS is something I wanna transfer my talents too. right now I do customized funko POPS or my own just art things for conventions mainly but going to those conventions seeing things like Freddy Nike kicks or Jason kicks makes me wanna do things like this as a horror geek! But now that I found you man ANYTHING IS POSSIBLE been up all night watching these vids man.
Thanks for watching Dakota!
I hope you are not working on TWD 🙃😉
Consider a square, multiple dots or registration mark instead of a single dot. A dot is round and can still be rotated even though the dots align.
That was a fire custom. Especially when you went in and hand painted, I didn’t really think you could pull it off. Yet you proved me wrong. Great customs and you also helped inspired me to do a Marilyn Monroe theme.
Your videos are by far the most educational and most helpful on UA-cam. Thank you!
Glad you like them!
Fantastic job! Love the videos keep up the wonderful work.
Man you really are something else. Appreciate the hard work you put into all your videos making things easy to understand. Even if I don’t know anything about photoshop I could’ve done this blindfolded. Insane video man. Props to you and your team.
Haha thanks for watching Tyler!
👍🏼, I’ve been drawing&coloring for a long time and Been watching for a while and motivated to start customizing my own shoes 👟 I’ll be posting soon thanks to your tutorials and guides!
This content was awesome! Been waiting for this vid, going to try it out now! Thanks so much for another fantastic tutorial !
Cant wait to see what youre able to cook up with it !
I've soaked up so much game from your channel bro Your tutorials are by far the most informative on UA-cam hands down you played a major roll in helping me perfect my craft.
Just wanted to say thanks for sharing all of your knowledge with the world you're greatly appreciated 🙏🏼💯
Thanks for watching Dee, Channel isnt possible without support from people like yourself 🤙
Giving away heaps of pointers , thanks man ... Also cool to see what those other tools at the craft shop are used for (eg.the pizza slicer)
Your dot reference point technique is commonly used in Silkscreening, its also helpful to do dots in the top left and bottom right corners to avoid pivoting the stencil out of place.
Good video man!
Yes Ive heard that! Can also do crosshairs instead of dot, but as long as you nail the concept of reference point youll be good to go!
Doesn’t photoshop have a registration mark tool in print settings?
Thank you, this is the best multi-layer stencil tutorial.
Just awesome work!!! Thank you for sharing and all you tips.
Thanks for checking out the video!
Awesome tutorial!! Opening 🚪 for all customizers! 🤙💯
🤟
You're a real one man! No one in this rare industry explains their techniques specifically 💯
Appreciate you watching!
Dillon that felt like a 15min video, great content, straight out of the top draw, thank you !
Haha thanks for watching my man we appreciate you!
This is madness , love it , i need to play with that photoshop, now im trying to save money to start customizing shoes, and this will help me a lot. I know i can do it , you help us a lot in out future and how fast will can improve. Tehnique its absolute necessarily for portraits if we dont have the skill to paint it by hand. I cant wait to start something and be able to not working for someone else. In the name of all 10.000 viwers i say thank you for all. You deserve some profit for all your strugles to make it possible to understand by us.
This is super dope!
Great job on the tutorial!
Love the Chanel and the Art work .
Thanks for watching Chris!
So dope you took the time to clearly explain and demonstrate all of this man!!! I can tell there has been tons of trial and error involved in coming up with that perfect and simplified process hahahaha.
Absolutely bro, glad it came across as understandable at least it sounds 🤙
Loved every minute of it. @dejesussus for president!
Bravo! Great video man. Love the music and the vibe.
Thanks for watching man!
I'm the 3000th like! Thanks for the tutorial. I'm new at painting but have experience w/ vinyl and photoshop so I caught on. This is awesome that you did this!
🙌🏽
That is the best (tekst) intro ever 0:00 - 0:10 THANK YOU SO MUCH
Amazing bro, I’ve be working how to do this, thank you!!!!!
Thanks man, look forward to seeing what you can cook up with it.
I am SUPER jealous of the owner of these shoes!!! I love anything Marilyn Monroe, but I think that picture on the shoes is one of my most favorites! You did an awesome job on it, for sure! Amazing work! 👏🏻
Thank you for this content!
Thank you for watching!
Thank you for the information you the best man
wooww thx master! i love your videos, so helpful!
🙌🏽🙌🏽
Good stuff fam!! I use a square or plus sign for my reference point. Lines up a little easier for me
Spot on man, wont move laterally on ya.
I know I’m late on this video but DAMNNNN DUDE THIS EXACT VIDEO is what I was looking for a few years ago .. figured this technology existed but just couldn’t find it.. I had all my favorite tattoo stencils saved in photoshop, thought it would be fun to make prints or spray them .. but couldn’t figure it out .. i mean I could separate out each layer but then trying to manually trace cut them by hand ? No way , so hard. and now here it is- it auto cuts/prints them too?? so cool.. I need this machine.. btw your videos are really giving me an itch man I’m about to go paint all my old kicks , then buy new ones , paint those too! Haha thx for the inspiration !!!
Wow. This was a major help. The reference dot technique was what I needed to know, because I always wondered how to line up a stencil without it being off centered. Only thing is I don't have photoshop
Theres a less expensive program with still the majority of the capability called affinity photo
Keep it up I have Learn a lot for your content 🙏
Thanks for watching!
Very helpful! Thanks!
Thanks for watching!
I literally love your for this
We literally love you for watching!
I use a crosshair bro + it makes sure your completely straight on alignment
thank you 👍🏼
Hey Dillon, love the video, I've used both photoshop and silhouette software in the past for tee shirt designs so I'm familiar with the process you mentioned here. I just thought I'd mention you can get a product for your old cutting mat called Sticky Mat Adhesive (may be called something else in the US) which basically makes your mat sticky again!
Keep up the great work and stay blessed.
Very nice, thanks for watching!
Respect bro 👏🏽👍🏼👍🏼
Thank you for this one
🤙
Great video wish you were here when I was a kid
amaizing
watched completely, I do screenprinting so the registration "dot" totally makes sense and creates the same method
I do t-shirts. Perfect tutorial!
Jack George ah very cool! We may need some tshirts in the future if you’re open to taking on orders 🤙🏽
@@DeJesusCustomFootwear Yeah man, we have a full shop set-up, we're also going to be taking embroidery soon as well so hats,
jackets, etc. I think we could work something out. my email is jackgeorgegraphics@gmail.com
Lowkey he has the best tutorials for customizing shoes especially when u are not that much of an artist
Ayyyyyyyyyyyyyyyyy! We appreciate you.
@@DeJesusCustomFootwear keep up the good work bro
The dot is called a registration mark. Using just one registration mark has the disadvantage that you still might have it rotate slightly around that registration mark, which is why the industry standard is three registration marks. Registration marks are usually placed outside the design/image in three corners and are a combinaton of a cross hair plus circle segments with stencils and a full circle outline intersecting the cross hair with multi color screenprints.
Yes great tip! Learned that after this vid dropped and have been using it since
So good video🙏🏻
Thanks Carl!
GOAT, I'm about to start customizing sneakers real soon with little to no artistic experience I know I can get on your level anything is possible
🤙🏽🤙🏽🤙🏽
Skilled 1234 same bro I just ordered my paint n cameo off amazon just waiting for the delivery. Next month I’m copping the airbrush
You are a super super teacher 😉😉😉😉😆😆😆😆😆
The dot on the forehead is similar to what professional printers call a registration mark. Most use a crosshair shape because it’s easier to see which way you are off.
Yes very cool stuff
I make color separations for printing and I would highly recommend using at least two registration marks (and use a plus sign instead of a dot) so there is no chance of the image rotating. Ideally they would be outside the image area and as far from each other as possible. You might have made improvements in the last 4 years though.
Dope
That is a serious display of craftsmanship. I was also wondering there at the end if you were going to highlight the iconic beauty mark on her check...and of course you did. That was really great work. Do you remask the completed image and hit it with protective clear coat?
thanks for not hoarding tips! that positive energy is coming back to u - 200k on the way!
Personally, I would use a Diamond but that's me. Great Video
Yes something a cross hair or diamond works best since you can make sure aligning it in both directions! Learned that one further down the line
I have a question. (BTW I loved this video. very helpfull.. ill try making some more detailed stuff now)
I did this vinyl stencil and painted it. when I had to remove it to reveal it some of my paint was going with the vinyl like it was some kind of vinyl too.... is that because I didn't prep the leather properly or to thick layer of paint, or does it just happens sometimes? quick tip make two dots one at the top and one at the bottom then you'll angle it more precisely. if your artwork is really complicated.Thanks.
Ty
40th viewer. 1st from PH I think 😂❤️
quick tip make two dots one at the top and one at the bottom then you'll angle it more precisely. if your artwork is really complicated.
Thank you so much man.. I appreciate you sharing this... I have a question though ... what camera did you use filming yourself at around 15:14 ?
This is also how you get graphics for screen printing. Which is how I know it plus the align Mark's really help.
Yes sir!
So does this same process work if u wanted to make a big multi layer stencil and put it through the circuit
Good one, and yes I watched the whole thing. I wonder why you don't use a transparent transfer tape?
The green Star is transparent enough that you can still see pretty well.. I’ve tried tons of other ones and this is just where everything works easiest for me, most of the clear ones aren’t much of a tape so they’re harder to rip and make minor changes with.
I'm so happy to see videos that often, as a beginner I'm always up for good advice, and by the way i had a question about stencils, I don't have any airbrush, I would like to know if it's possible to paint over stencils with brushes? Also I guess you would recommend to put thine layers ? And I say some portable airbrush, with little compressors attached to the airbrush, it's nice for me cause I change home location very often but I don't know if it's good or not especially to do sock liners ?
Yes you could do it by hand with paintbrush, also airbrush works great for sockliners to keep nice and soft
🔥🔥🔥🔥🔥
This is so awesome... I am so inspired and grateful for you sharing your knowledge. I brought a cricut machine would the steps work with that too?
Yup should be same process!
@@DeJesusCustomFootwear awesome really appreciate the support you have give. Had a mini heartattack thinking I brought the wrong machine. LET'S GO
Is there a stencil cutter larger than 12”x12”?
I hope these questions weren't already asked, but here we go (by the way I have a Cricut Explore machine). Question #1 How are you able to transfer your stencils to the shoes surface so easily? I feel like I have the hardest time getting the stencil to stay on the shoe and not be pulled up by the transfer tape. #2 I noticed most the vinyl I see is labeled as "permanent", do yo use the permanent vinyl for your stencils even though it's not going to stay on the shoe? #3 For example I have an black toe box and I want orange lettering on the toe box, would you always lay down the lettering color first and then put the letter stencil on top of that and paint over it and the rest of the toe box black?
I love the knowledge your share and I hope you can give me some pointers on how to achieve better results. Thanks Dillon.
Really shouldn’t be an issue if you’re using the right vinyl/transfer tape combo. So I’d definitly consider trying difffrent ones than you are now. Permanent vinyl typically means it’s gunan be a lot stronger, the fdc 3700 glitter vinyl would be listed as permanent.. in the event you want to do orange lettering on top of black you’d be totally fine laying down your stencil over the black surface and spraying inside the negative space of the stencil.
Good content bro. Usually the 'black dot' you refer to is known as a 'registration mark'
Perfect thanks for looking out man! And thanks for watching 🤙🏽
doing this at 2:10 am on photopea😎
1:42am on photopea as well lol
2:05am 😂
Excellent video!! One of my struggles has been transfer tape. What brand do you use? I use a clear type that looks more like vinyl and its hard to lift the transfer tape on complex stencils with tons of floating pieces. Elephant print for example. I feel like having the right transfer tape could save me future headaches and frustration lol. I appreciate all the work you put in to these videos, I can't thank you enough...
Greenstar layflat, covered it a couple times in this vid why it works so good
@@DeJesusCustomFootwear I apologize, I've been under the weather and didn't pick up on that in the vid when I watched it. Will go back and rewatch when I feel better. Thank you for taking time out of your day to reply, much appreciated
Shoe Addict 101 haha no worries at all, there’s a lot going on in this video!
What a great video to learn.
I have a question..?
How do you do the touch up at the end?
If you spray under the tap, do you use alcohol? or what to take of the paint of the pieces that needs the stay clean.
Any tips for me ?
Thanks DeJesus
I would just touch up any areas with a detail brush or toothpick, in this example if i got any colors on top of my pink i would just paint pink over it.
@@DeJesusCustomFootwear Thanks for the answer bro..
HELLO!!! Great videos thank you for all the info. I have a question what kind of printer you are using to make this kind of stencil. I never make my own custom shoes but im excited to make one day!!!!!
Silhouette cameo but it’s covered in the vid in detail how to use!
Amazing video, this looks awesome and relatively easy for someone who can't draw for shit (me) 🔥
Having 2 dots at opposing corners would ensure the rotation is spot on, and also that there are no artifacts at the worst spot after removal. I wouldn't want even a faint dot remanent right in the middle of my main character's forehead 😂
Could you recommend an airbrush kit for me to get started with? Wanting to start using this technique on cornhole boards that I build.
I use a badger patriot 105! You may want something slightly more industrial sized though since those boards are much bigger than shoes..
3:04 is where the magic begin
Happy memorial day. My friend can you please tell me what surface you was doing the bulls demonstration on I will really appreciate it
It was just an old piece of foam core .
and how do i save to cut on crucut
how long would you recommend the paint to cure before putting on the vinyl to avoid peeling off the paint on the shoe?
Minimum 15 minutes
Do you know any online shops that sell the FDC 3700 and the Oramask 811 and ship internationally?
Longest tutorial BUT who in the bloody eLL gives this kind of profitable insight FOR FREE!! So, NOBODY should av anything 2 say bc of the length... Everyone should be proper thankful to have had the RIGHT technique shown to us w/o needing to send money in first. That's what sets you apart from the rest as loads of others just show "part" of the process leaving us new twats 2 guess which way is up... So thank you ever so much mister DeJesus.... Suiting name as well...🧡👍🏽🙂
Haha appreciate your kind words and suport!
@@DeJesusCustomFootwear most welcome... It's well deserved and you've helped me loads at being able to start bringing in some income while my lad fights non Hodgkin's Lymphoma. It's ever so hard to keep a job w/ that, Crohn's, Asthma and Allergies. So finding you and watching your techniques beats these internet scams ANY DAY and what you offer is valuable to those of us that need something other than an internet scam to bcome a millionaire in 60 days (as if)... So ALL THE THANKS and SUPPORT belongs to you. 🧡🙂🧡
King
yessssir
Love the video!!! Very odd weeding technique tho 🤣 I rather not weed on the sticky side
Ive always found it so much easier lol
@@DeJesusCustomFootwear I mainly do custom decals and want to start doing shoes so thanks for all effort you put into this video
W O W. 😲👏🏿👏🏿👏🏿👏🏿
🤙
Hey brotha what is the description of the photo shop you use so I can purchase for my layered stencils. Thanks in advance. God bless
I’m not sure what you mean unfortunately, are you asking what version of photoshop?
I have a question.
BTW I loved this video. very helpfull.. ill try making some more detailed stuff now.
I did this vinyl stencil and painted it. when I had to remove it to reveal it some of my paint was going with the vinyl like it was some kind of vinyl too.... is that because I didn't prep the leather properly or to thick layer of paint, or does it just happens sometimes
quick tip make two dots one at the top and one at the bottom then you'll angle it more precisely. if your artwork is really complicated.Thanks.
Yeah sounds like the paint didn’t bond so I would point to the prep first.
@@DeJesusCustomFootwear damn
I've got a question about airbrushing Angelus paints - I am currenly using a 0.2mm needle and long story short - I got the advice to use either a 0.3 or 0.5mm needle since my current 0.2 is to thin. Does anyone else use a airbrush and which needle thickness do you guys use?
Daan V the .2 is probably too thin. Especially if you’re just base coating shoes and not incredibly precise detailing with the airbrush
I have a question: I barely started to getting into the customizing buisness and I’m wondering what’s a good airbrush I saw on amazon a masters airbrush kit but rn I’m thinking of getting the airbrush kit they have in harbor freight tools that’s is $90
Jose and Joel the compressor from harbor freight is fine but the airbrush no good. Pick up a badger patriot 105, we have a few videos on it!
DeJesus Custom Footwear alright👍🏽😀 thx
The airbrush at harbor fright is trashhhhhhh
Awesome video bro! Is this cut on a cameo 3? If so would you recommend a cameo for stencil and vinyl cutting? Thanks in advance sorry for the long winded msg
Yes and yes!
@@DeJesusCustomFootwear lol i should prob watch the whole video before I ask the questions...
😥😥 "OUT OF STOCK" 😥😥 Hey, D... the link for the FDC 3700 gold glitter vinyl for a fabric stencil is never in stock, do you have link for another FDC 3700 color that is available or maybe an alternative vinyl? I saw that VViViD has a blue low tack stencil vinyl available too, would that work too?
What if you place a (+ plus sign) in the corner of the layers as the alignment reference?
That actually works much better than just the dot, also having more than one in different locations can further help
What kind of photoshop programs, do you use for your custom designs?
Mainly photoshop or procreate
wouldn't be better 2 dots for alignment? thanks for the video
Yes! And crosses will work better than dots also
Do you ever make reusable stencils? I'm trying to figure out how to do that onto mylar vs. vinyl.
Sure do! But we laser cut those
Use a plus sign on each side instead of a dot
How would you make a stencil if an image had multiple colors like a skin tone with all the tones of the same color.
OG RAY you would need a high contrast version of that image , deep dive on that topic in this video
m.ua-cam.com/video/S3WefRFytCs/v-deo.html